20260723 焊口批量修改

DataBase/版本日志/HJGLDB_DS_2026-07-23_bwj.sql

@@ -0,0 +1,125 @@
+
+ALTER VIEW [dbo].[HJGL_View_JointInfo]
+AS
+/*管线焊口信息视图*/
+SELECT 
+	JointInfo.JOT_ID,
+	JointInfo.ProjectId,
+	JointInfo.PointType,
+	JointInfo.RT1_RepairFilm,
+	JointInfo.dreportid,
+	IsoInfo.BSU_ID,
+	JointInfo.STE_ID,
+	JOT_JointNo,
+	JOT_DailyReportNo,  --日报告号
+	(CASE WHEN JointInfo.Jot_WeldingDate IS NOT NULL THEN JointInfo.Jot_WeldingDate
+	ELSE WeldReportMain.JOT_WeldDate END) AS JOT_WeldDate, --焊接日期
+	JointInfo.ISO_ID,
+	ISO_IsoNo, --管线号
+	Unit.UnitCode,
+	Unit.UnitName,
+	Steel.STE_Code AS STE_Name1,--材质1
+	Steel1.STE_Code AS STE_Name2,--材质2
+	Welder.WED_Code AS WED_Code1, --盖面焊工代号
+	Welder.WED_Name AS WED_Name1, --盖面焊工名称
+	FloorWelder.WED_Code AS WED_Code2, --打底焊工代号
+	FloorWelder.WED_Name AS WED_Name2, --打底焊工名称
+	JointInfo.WLO_Code,
+	(CASE WHEN JointInfo.WLO_Code='F' THEN '现场安装' ELSE '预制' END) AS WLO_Name,--焊接区域
+	JOT_DoneDin,
+	IS_Compute,
+	com1.Com_Name AS Component1,--组件1号
+	com1.COM_Code AS COM_Code1,--组件1号
+	com2.COM_Name AS Component2,--组件2号  
+	com2.COM_Code AS COM_Code2,--组件1号
+	m1.WeldName AS WeldMat,--焊条
+	WeldMaterial.WeldName AS WeldSilk,--焊丝
+	batchDetail.PointType AS JointStatus,---焊口状态
+	JOT_Dia,
+	JOT_Size,
+	JOT_Sch,
+	JOT_FactSch,
+	JOT_JointFlag,
+	JOT_TrustFlag,
+	ProessTypes,
+	JOT_JointDesc,
+	JointInfo.JOTY_ID,
+	JointType.JOTY_Name,--焊缝类型
+	JointType.JOTY_Code,--焊缝类型
+	JointInfo.WME_ID,
+	WeldMethod.WME_Name AS WME_Name,--焊接方法
+	WeldMethod.WME_Code,--焊接方法代码
+	SlopeType.JST_Name, --坡口类型
+	SlopeType.JST_Code, --坡口类型代码
+	IS_Proess,
+	(CASE WHEN IS_Proess=1 THEN '是' ELSE '否' END) AS IS_ProessName,
+	JOT_PrepareTemp,
+	JOT_CellTemp,
+	JOT_LastTemp,
+	JOT_JointAttribute,
+	JOT_Location,
+	batch.BatchCode AS BatchCode,--批次号
+	batchDetail.PointDate AS PointDate,--点口日期
+    NULL AS  CH_TrustCode, NULL AS CH_TrustDate,
+	--NDTType.NDT_Name as NDT_Name,--探伤类型
+	JointInfo.JOT_Remark,
+	JointInfo.RT_States,
+    JointInfo.UT_States,
+	JointInfo.MT_States,
+	JointInfo.PT_States,
+	JointInfo.PAUT_States,
+	(case when (select top 1 IsOK from HJGL_CH_HotProessResult hr where hr.JOT_ID=JointInfo.JOT_ID)=1 then '合格'
+	     else '' end) as HotProessResult,
+	Servicess.SER_Code,--介质代号
+	--NDTRate.NDTR_Name as NDTR_Name,  --探伤比例
+	--NDTRate.NDTR_Code,  --探伤比例
+	isoInfo.ISO_TestPress,--试验压力
+	isoInfo.ISO_DesignPress,--设计压力
+	isoInfo.ISO_DesignTemperature,--设计温度
+	IsoClass.ISC_IsoCode,--管线等级
+	is_hj= CAST((CASE WHEN JointInfo.DReportID IS NULL  THEN '0' ELSE '1' END ) AS BIT),   --是否焊接
+	if_dk=CAST((CASE WHEN batchDetail.NDT IS NULL THEN '0' ELSE  '1' END) AS BIT),  --是否点口		
+	JointInfo.InstallationId,
+	JointInfo.NDTR_ID,
+	JointInfo.IsSpecial,
+	JointInfo.IsSpecial AS IsSpecialName,	--是否特殊
+	Installation.InstallationName,--装置
+	NDTRate.NDTR_Name,
+	JointInfo.Sort1,JointInfo.Sort2,JointInfo.Sort3,JointInfo.Sort4,JointInfo.Sort5		
+	,JointType.JOTY_Group,
+	JointInfo.JOT_Electricity,--焊接电流
+	JointInfo.JOT_Voltage, --焊接电压
+	JointInfo.WeldL, --非常焊缝
+	JointInfo.IsGold,--是否黄金口
+	JointInfo.JOT_QualifiedLevel, --合格等级
+	Steel.HardQuaStandard--硬度合格标准
+FROM HJGL_PW_JointInfo  AS JointInfo
+LEFT JOIN HJGL_PW_IsoInfo AS IsoInfo ON IsoInfo.ISO_ID=JointInfo.ISO_ID
+LEFT JOIN HJGL_BO_WeldReportMain AS WeldReportMain ON WeldReportMain.DReportID=JointInfo.DReportID
+LEFT JOIN HJGL_BS_Steel AS Steel ON Steel.STE_ID=JointInfo.STE_ID
+LEFT JOIN HJGL_BS_Steel AS Steel1 ON Steel1.STE_ID=JointInfo.STE_ID2
+LEFT JOIN HJGL_BS_Welder AS Welder ON Welder.WED_ID= JointInfo.JOT_CellWelder
+LEFT JOIN HJGL_BS_Welder AS FloorWelder ON FloorWelder.WED_ID=JointInfo.JOT_FloorWelder
+--LEFT JOIN HJGL_BS_WeldLocation AS WeldLocation ON WeldLocation.WLO_Code  =JointInfo.WLO_Code
+LEFT JOIN HJGL_BS_Component AS com1 ON com1.COM_ID=JointInfo.JOT_Component1
+LEFT JOIN HJGL_BS_Component AS com2 ON com2.COM_ID=JointInfo.JOT_Component2
+--LEFT JOIN HJGL_BS_WeldMaterial m1 ON m1.WMT_ID=JointInfo.JOT_WeldMat
+--LEFT JOIN HJGL_BS_WeldMaterial AS WeldMaterial ON WeldMaterial.WMT_ID=JointInfo.JOT_WeldSilk
+LEFT JOIN View_WeldInfoDropDownLists as m1 on m1.WeldId = JointInfo.JOT_WeldMat and m1.WeldTypeName like '%焊条%'
+LEFT JOIN View_WeldInfoDropDownLists as WeldMaterial on WeldMaterial.WeldId = JointInfo.JOT_WeldSilk and WeldMaterial.WeldTypeName like '%焊丝%'
+LEFT JOIN HJGL_BS_JointType AS JointType ON JointType.JOTY_ID=JointInfo.JOTY_ID
+LEFT JOIN HJGL_BS_WeldMethod AS WeldMethod ON WeldMethod .WME_ID=JointInfo.WME_ID
+LEFT JOIN HJGL_BS_SlopeType AS  SlopeType ON SlopeType.JST_ID=JointInfo.JST_ID
+LEFT JOIN dbo.HJGL_BO_BatchDetail AS batchDetail ON batchDetail.JOT_ID = JointInfo.JOT_ID
+LEFT JOIN dbo.HJGL_BO_Batch AS batch ON batch.BatchId = batchDetail.BatchId
+LEFT JOIN Base_Unit AS Unit ON Unit.UnitId=IsoInfo.BSU_ID
+--left join HJGL_BS_NDTRate AS NDTRate on NDTRate.NDTR_ID=IsoInfo.NDTR_ID
+LEFT JOIN HJGL_BS_Service AS Servicess ON Servicess.SER_ID=IsoInfo.SER_ID
+LEFT JOIN HJGL_BS_IsoClass AS IsoClass ON IsoClass.ISC_ID=IsoInfo.ISC_ID
+LEFT JOIN Project_Installation AS Installation ON Installation.InstallationId =JointInfo.InstallationId
+LEFT JOIN HJGL_BS_NDTRate AS NDTRate ON NDTRate.NDTR_ID =JointInfo.NDTR_ID
+
+
+GO
+
+

HJGL_DS/BLL/HJGL/WeldingManage/HJGL_PW_JointInfoService.cs

@@ -1358,5 +1358,23 @@ namespace BLL
                     && (y.JOTY_Name.Contains("支管连接焊缝") || y.JOTY_Name.Contains("角焊缝"))
                     select x).ToList();
         }
+
+        public static string ConvertJointCodeString(string jotIdList)
+        {
+            string name = string.Empty;
+            string[] list = jotIdList.Split(',');
+            foreach (var item in list)
+            {
+                if (!string.IsNullOrEmpty(item))
+                {
+                    name += GetJointInfoByJotID(item).JOT_JointNo + ",";
+                }
+            }
+            if (!string.IsNullOrEmpty(name))
+            {
+                name = name.Substring(0, name.LastIndexOf(","));
+            }
+            return name;
+        }
     }
 }

HJGL_DS/FineUIPro.Web/FineUIPro.Web.csproj

@@ -58,6 +58,7 @@
     <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
     <PlatformTarget>AnyCPU</PlatformTarget>
     <Prefer32Bit>false</Prefer32Bit>
+    <PreferNativeArm64>false</PreferNativeArm64>
   </PropertyGroup>
   <ItemGroup>
     <Reference Include="Aspose.Words, Version=21.8.0.0, Culture=neutral, PublicKeyToken=716fcc553a201e56, processorArchitecture=MSIL">
@@ -1304,6 +1305,7 @@
     <Content Include="HJGL\TrustManage\TrustManageItemEdit.aspx" />
     <Content Include="HJGL\WeldingManage\CompleteReportDateEdit.aspx" />
     <Content Include="HJGL\WeldingManage\DetectionPoint.aspx" />
+    <Content Include="HJGL\WeldingManage\JointInfoBatchModity.aspx" />
     <Content Include="HJGL\WeldingManage\JointInfoBatchUpdate.aspx" />
     <Content Include="HJGL\WeldingManage\JointInfoCopy.aspx" />
     <Content Include="HJGL\WeldingManage\JointInfoOut.aspx" />
@@ -6476,6 +6478,13 @@
     <Compile Include="HJGL\WeldingManage\DetectionPoint.aspx.designer.cs">
       <DependentUpon>DetectionPoint.aspx</DependentUpon>
     </Compile>
+    <Compile Include="HJGL\WeldingManage\JointInfoBatchModity.aspx.cs">
+      <DependentUpon>JointInfoBatchModity.aspx</DependentUpon>
+      <SubType>ASPXCodeBehind</SubType>
+    </Compile>
+    <Compile Include="HJGL\WeldingManage\JointInfoBatchModity.aspx.designer.cs">
+      <DependentUpon>JointInfoBatchModity.aspx</DependentUpon>
+    </Compile>
     <Compile Include="HJGL\WeldingManage\JointInfoBatchUpdate.aspx.cs">
       <DependentUpon>JointInfoBatchUpdate.aspx</DependentUpon>
       <SubType>ASPXCodeBehind</SubType>

HJGL_DS/FineUIPro.Web/FineUIPro.Web.csproj.user

@@ -2,7 +2,7 @@
 <Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
   <PropertyGroup>
     <UseIISExpress>true</UseIISExpress>
-    <LastActiveSolutionConfig>Release|Any CPU</LastActiveSolutionConfig>
+    <LastActiveSolutionConfig>Debug|Any CPU</LastActiveSolutionConfig>
     <Use64BitIISExpress />
     <IISExpressSSLPort />
     <IISExpressAnonymousAuthentication />

HJGL_DS/FineUIPro.Web/HJGL/DataIn/JointIn.aspx

@@ -36,6 +36,7 @@
                                 <f:FileUpload ID="FileExcel" runat="server" Label="数据文件" EmptyText="请上传EXCEl格式文件" Width="400px" LabelWidth="70px"></f:FileUpload>
                                 <f:Button ID="btnAudit" runat="server" Text="审核" ToolTip="文件审核！" OnClick="btnAudit_Click"></f:Button>
                                 <f:Button ID="imgbtnImport" runat="server" Text="上传" ToolTip="文件上传！" OnClick="imgbtnImport_Click"></f:Button>
+                                <f:CheckBox ID="cbUpdateIn" runat="server" Text="更新导入"></f:CheckBox>
                                 <f:ToolbarFill ID="ToolbarFill1" runat="server"></f:ToolbarFill>
                                 <f:Button ID="imgbtnUpload" runat="server" Icon="DiskDownload" Text="模板下载" OnClick="imgbtnUpload_Click" EnableAjaxLoading="false"></f:Button>
                                 <f:HiddenField ID="hdFileName" runat="server">

HJGL_DS/FineUIPro.Web/HJGL/DataIn/JointIn.aspx.cs

@@ -1,4 +1,8 @@
-using System;
+using BLL;
+using FastReport.Utils;
+using NPOI.POIFS.Crypt.Dsig;
+using NPOI.SS.Formula.Functions;
+using System;
 using System.Collections.Generic;
 using System.Data;
 using System.Data.OleDb;
@@ -8,7 +12,6 @@ using System.Linq;
 using System.Web;
 using System.Web.UI;
 using System.Web.UI.WebControls;
-using BLL;
 namespace FineUIPro.Web.HJGL.DataIn
 {
     public partial class JointIn : PageBase
@@ -939,10 +942,59 @@ namespace FineUIPro.Web.HJGL.DataIn
                             JOT_IDStr += newJointInfo.JOT_ID + ",";
                         }
                         else
+                        {
+                            if (this.cbUpdateIn.Checked)
+                            {
+                                newJointInfo.JOT_JointNo = col2;
+                                if (col8 == "固定")
+                                {
+                                    if (newJointInfo.JOT_JointNo.Last() != 'G')
+                                    {
+                                        newJointInfo.JOT_JointNo = newJointInfo.JOT_JointNo + "G";
+                                    }
+                                }
+                                if (newJointInfo.IsGold == true)
+                                {
+                                    if (newJointInfo.JOT_JointNo.Last() != 'H')
+                                    {
+                                        newJointInfo.JOT_JointNo = newJointInfo.JOT_JointNo + "H";
+                                    }
+                                }
+                                newJointInfo.JOT_ID = getJoint.JOT_ID;
+                                BLL.HJGL_PW_JointInfoService.UpdateJointInfo(newJointInfo);
+
+                                // 更新排序字段
+                                string strSort = @"UPDATE dbo.HJGL_PW_JointInfo SET 
+                                           Sort1=(case when PATINDEX('[A-Z]%',JOT_JointNo)>0   THEN 'B'
+                                                       WHEN ISNUMERIC(JOT_JointNo)=1 then 'C' ELSE  'C' END),
+									       Sort2=(CASE WHEN ISNUMERIC(JOT_JointNo)=1 then try_cast(REPLACE(JOT_JointNo,'.','') AS INT)
+                                                       WHEN ISNUMERIC(SUBSTRING(JOT_JointNo,0,CHARINDEX('Z',JOT_JointNo)))=1 
+                                                       THEN TRY_CAST(SUBSTRING(JOT_JointNo,0,CHARINDEX('Z',JOT_JointNo)) as int)
+                                                       WHEN PATINDEX('[0-9]%',JOT_JointNo)>0 then 
+                                                       TRY_CAST(left(JOT_JointNo,PATINDEX('%[^0-9]%',JOT_JointNo)-1) as int)
+                                                       ELSE 0  END),
+                                           Sort3= SUBSTRING(JOT_JointNo,1,1),
+                                           Sort4=(CASE WHEN CHARINDEX('Z',JOT_JointNo)>0 and SUBSTRING(JOT_JointNo,1,1)<>'Z' 
+                                                        THEN ISNULL(TRY_CAST(SUBSTRING(replace(JOT_JointNo,'#',''),2,CHARINDEX('Z',JOT_JointNo)-2) as int),0)   
+	                                                    WHEN PATINDEX('%[A-G]%',SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)))>0 
+	                                                    THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,2,len(JOT_JointNo)-2) as int),0)
+                                                        ELSE ISNULL(TRY_CAST(SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)) as int),0) END),
+                                           Sort5=(CASE WHEN CHARINDEX('Z',JOT_JointNo)>0 
+                                                       THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,charindex('Z',JOT_JointNo)+1,len(JOT_JointNo)) AS INT),0)
+	                                                   WHEN PATINDEX('%[A-Y]',SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)))>0 
+	                                                   THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,2,len(JOT_JointNo)-1) as int),0) ELSE 0 END)
+                                      WHERE JOT_ID='" + newJointInfo.JOT_ID + "'";
+                                SQLHelper.ExecutSql(strSort);
+
+                                //JOT_IDStr += Funs.DB.HJGL_PW_JointInfo.FirstOrDefault(x => x.ProjectId == getProject.ProjectId && x.ISO_ID == getPWisInfo.ISO_ID && x.JOT_JointNo == col2).JOT_ID + ",";
+                                JOT_IDStr += newJointInfo.JOT_ID + ",";
+                            }
+                            else
                             {
                                 result += "第" + (i + 2).ToString() + "行," + "该焊口已存在" + "\n";
                             }
                         }
+                    }
                     errorInfos += result;
                 }
                 if (!string.IsNullOrEmpty(JOT_IDStr))

HJGL_DS/FineUIPro.Web/HJGL/DataIn/JointIn.aspx.designer.cs

@@ -7,10 +7,12 @@
 // </自动生成>
 //------------------------------------------------------------------------------
 
-namespace FineUIPro.Web.HJGL.DataIn {
+namespace FineUIPro.Web.HJGL.DataIn
+{
 
 
-    public partial class JointIn {
+    public partial class JointIn
+    {
 
         /// <summary>
         /// Head1 控件。
@@ -93,6 +95,15 @@ namespace FineUIPro.Web.HJGL.DataIn {
         /// </remarks>
         protected global::FineUIPro.Button imgbtnImport;
 
+        /// <summary>
+        /// cbUpdateIn 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.CheckBox cbUpdateIn;
+
         /// <summary>
         /// ToolbarFill1 控件。
         /// </summary>

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfo.aspx

@@ -71,15 +71,12 @@
                                 </f:Button>
                                 <f:Button ID="btnBatchAdd" Text="批量增加" ToolTip="批量增加" Icon="TableAdd" runat="server" OnClick="btnBatchAdd_Click">
                                 </f:Button>
-                                <f:Button ID="btnBatchModify" Text="批量修改" ToolTip="批量修改焊口属性" Icon="TableAdd" runat="server" OnClick="btnBatchModify_Click">
+                                <f:Button ID="btnBatchUpdate" Text="批量修改" ToolTip="批量修改焊口信息" Icon="TableAdd" runat="server" OnClick="btnBatchModity_Click">
                                 </f:Button>
                                 <f:Button ID="btnBatchDel" Text="批量删除" ToolTip="批量删除" Icon="Delete" runat="server" OnClick="btnBatchDel_Click">
                                 </f:Button>
                                 <f:Button ID="btnOut" runat="server" Text="导出" ToolTip="导出" Icon="FolderUp" OnClick="btnOut_Click">
                                 </f:Button>
-                                <f:Button ID="btnFileName" Text="文档名" ToolTip="文档名" Icon="TableEdit" runat="server" OnClick="btnFileName_Click">
-                                </f:Button>
-
                                 <f:HiddenField ID="hdColumn" runat="server"></f:HiddenField>
                             </Items>
                         </f:Toolbar>
@@ -95,6 +92,8 @@
                                 <f:Label runat="server" Width="60px"></f:Label>
                                 <f:ToolbarFill ID="ToolbarFill2" runat="server">
                                 </f:ToolbarFill>
+                                <f:Button ID="btnBatchModify" Text="修改焊口属性" ToolTip="批量修改焊口属性" Icon="TableAdd" runat="server" OnClick="btnBatchModify_Click">
+                                </f:Button>
                                 <f:Button ID="btnPrint" Text="焊接记录打印" EnableAjax="false" Icon="Printer" Hidden="true" runat="server" OnClick="btnPrint_Click">
                                 </f:Button>
                                 <f:Button ID="btnPrintNew" Text="焊接记录打印" Icon="Printer" runat="server" OnClick="btnPrintNew_Click">
@@ -102,6 +101,8 @@
                                 <f:Button ID="btnSelectColumn" Text="选择显示列" Icon="ShapesManySelect"
                                     runat="server" OnClick="btnSelectColumn_Click">
                                 </f:Button>
+                                <f:Button ID="btnFileName" Text="文档名" ToolTip="文档名" Icon="TableEdit" runat="server" OnClick="btnFileName_Click">
+                                </f:Button>
                                 <%--  <f:CheckBox ID="ckALL" runat="server" Label="全部" LabelAlign="right" AutoPostBack="true"
                                 OnCheckedChanged="TextBox_TextChanged" Width="100px" LabelWidth="50px">
                             </f:CheckBox>--%>
@@ -172,7 +173,7 @@
                                 <%--<f:RowNumberField EnablePagingNumber="true" HeaderText="序号" Width="60px" HeaderTextAlign="Center"
                                 TextAlign="Center" />--%>
                                 <f:CheckBoxField ColumnID="ckbIsSelected" Width="80px" RenderAsStaticField="false" TextAlign="Center"
-                                    AutoPostBack="true" CommandName="IsSelected" DataField="JOT_ID" HeaderText="选择删除" HeaderTextAlign="Center" Locked="true" />
+     AutoPostBack="true" CommandName="IsSelected" DataField="JOT_ID" HeaderText="选择修改/删除" HeaderTextAlign="Center" Locked="true" />
                                    <f:WindowField ColumnID="JOT_JointNo" HeaderTextAlign="Center" TextAlign="Left" Width="100px"
                                     WindowID="Window1" HeaderText="焊口代号" DataTextField="JOT_JointNo" DataIFrameUrlFields="JOT_ID"
                                     DataIFrameUrlFormatString="JointInfoEdit.aspx?JOT_ID={0}" Title="焊口代号" ToolTip="着色表示该焊口已热处理或所在批已封，不能删除和修改！"
@@ -384,6 +385,10 @@
             Target="top" EnableResize="true" runat="server" OnClose="Window1_Close" IsModal="true"
             Width="800px" Height="650px">
         </f:Window>
+        <f:Window ID="Window10" Title="批量修改焊口信息" Hidden="true" EnableIFrame="true" EnableMaximize="true"
+            Target="top" EnableResize="true" runat="server" OnClose="Window1_Close" IsModal="true"
+            Width="1200px" Height="650px">
+        </f:Window>
 
         <f:Menu ID="Menu1" runat="server">
             <f:MenuButton ID="btnMenuEdit" OnClick="btnMenuEdit_Click" EnablePostBack="true"

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfo.aspx.cs

@@ -28,6 +28,18 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                 ViewState["ProjectId"] = value;
             }
         }
+        public string SelectedType
+        {
+            get
+            {
+                return (string)ViewState["SelectedType"];
+            }
+            set
+            {
+                ViewState["SelectedType"] = value;
+            }
+        }
+
 
         /// <summary>
         /// 定义集合
@@ -115,6 +127,7 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                 this.Grid1.Columns[35].Hidden = true;
                 this.Grid1.Columns[36].Hidden = true;
                 this.Grid1.Columns[37].Hidden = true;
+                //this.Grid1.Columns[38].Hidden = true;
 
                 List<string> columns = column.Split(',').ToList();
                 foreach (var item in columns)
@@ -1364,17 +1377,22 @@ namespace FineUIPro.Web.HJGL.WeldingManage
             if (CommonService.GetAllButtonPowerList(this.ProjectId, this.CurrUser.UserId, Const.HJGL_JointInfoMenuId, Const.BtnDelete))
             {
                 // 第一次点击：只打开复选框
-                if (this.Grid1.Columns[0].Hidden)
+                if (this.Grid1.Columns[0].Hidden || SelectedType == "BatchModity")
                 {
+                    list.Clear();
+                    SelectedType = "Delete";
                     this.Grid1.Columns[0].Hidden = false;
+                    this.Grid1.Columns[0].HeaderText = "选择删除";
                     this.BindGrid();
                     return;
                 }
                 if (list.Count == 0)
                 {
-                    Alert.ShowInTop("请勾选一条记录！", MessageBoxIcon.Warning);
+                    Alert.ShowInTop("请至少选择一条记录！", MessageBoxIcon.Warning);
                     return;
                 }
+                if (SelectedType == "Delete")
+                {
                     bool isShow = true;
                     if (list.Count > 1)
                     {
@@ -1414,56 +1432,14 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                         }
                     }
                    
-                //if (Grid1.SelectedRowIndexArray.Length == 0)
-                //{
-                //    Alert.ShowInTop("请选择一条记录！", MessageBoxIcon.Warning);
-                //    return;
-                //}
-                //bool isShow = true;
-                //if (Grid1.SelectedRowIndexArray.Length > 1)
-                //{
-                //    isShow = false;
-                //}
-                //string err = string.Empty;
-                //foreach (int rowIndex in Grid1.SelectedRowIndexArray)
-                //{
-                //    string rowID = Grid1.DataKeys[rowIndex][0].ToString();
-                //    string content = judgementDelete(rowID, isShow);
-                //    if (string.IsNullOrEmpty(content))
-                //    {
-                //        Model.SGGLDB db = Funs.DB;
-                //        var hotProessTrustItem = db.HJGL_CH_HotProessTrustItem.FirstOrDefault(x => x.JOT_ID == rowID);
-                //        if (hotProessTrustItem != null)
-                //        {
-                //            db.HJGL_CH_HotProessTrustItem.DeleteOnSubmit(hotProessTrustItem);
-                //        }
-                //        var hotProessItem = db.HJGL_HotProessItem.FirstOrDefault(x => x.JOT_ID == rowID);
-                //        if (hotProessItem != null)
-                //        {
-                //            db.HJGL_HotProessItem.DeleteOnSubmit(hotProessItem);
-                //        }
-                //        var hotProessResult = db.HJGL_CH_HotProessResult.FirstOrDefault(x => x.JOT_ID == rowID);
-                //        if (hotProessResult != null)
-                //        {
-                //            db.HJGL_CH_HotProessResult.DeleteOnSubmit(hotProessResult);
-                //        }
-                //        db.SubmitChanges();
-                //        BLL.HJGL_BO_BatchDetailService.DeleteBatchDetail(rowID);  //删除批明细
-                //        BLL.HJGL_PW_JointInfoService.DeleteJointInfo(rowID);
-                //        BLL.Sys_LogService.AddLog(BLL.Const.System_3, this.CurrUser.LoginProjectId, this.CurrUser.UserId, "删除焊口信息");
-                //    }
-                //    else
-                //    {
-                //        err += content;
-                //    }
-                //}
-                // 删除完成后，恢复按钮状态
-                this.Grid1.Columns[0].Hidden = true;
                     list.Clear();
 
                     if (string.IsNullOrEmpty(err))
                     {
                         Alert.ShowInTop("删除成功！", MessageBoxIcon.Success);
+                        // 删除完成后，恢复按钮状态
+                        this.Grid1.Columns[0].Hidden = true;
+                        SelectedType = string.Empty;
                     }
                     else
                     {
@@ -1472,6 +1448,7 @@ namespace FineUIPro.Web.HJGL.WeldingManage
 
                     this.BindGrid();
                 }
+            }
             else
             {
                 Alert.ShowInTop("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
@@ -1503,5 +1480,63 @@ namespace FineUIPro.Web.HJGL.WeldingManage
             }
         }
 
+        /// <summary>
+        /// 批量修改焊口信息
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void btnBatchModity_Click(object sender, EventArgs e)
+        {
+            if (CommonService.GetAllButtonPowerList(this.ProjectId, this.CurrUser.UserId, Const.HJGL_JointInfoMenuId, Const.BtnModify))
+            {
+                // 第一次点击：只打开复选框
+                if (this.Grid1.Columns[0].Hidden || SelectedType == "Delete")
+                {
+                    list.Clear();
+                    SelectedType = "BatchModity";
+                    this.Grid1.Columns[0].Hidden = false;
+                    this.Grid1.Columns[0].HeaderText = "选择修改";
+                    this.BindGrid();
+                    return;
+                }
+                if (SelectedType == "BatchModity")
+                {
+                    if (list.Count == 0)
+                    {
+                        Alert.ShowInTop("请至少选择一条记录！", MessageBoxIcon.Warning);
+                        return;
+                    }
+                    string jotIdList = string.Join(",", list);
+                    PageContext.RegisterStartupScript(Window10.GetShowReference(String.Format("JointInfoBatchModity.aspx?jotIdList={0}", jotIdList, "批量修改 - ")));
+
+                }
+                //bool isShow = true;
+                //if (list.Count > 1)
+                //{
+                //    isShow = false;
+                //}
+                //string err = string.Empty;
+                //for (int i = 0; i < list.Count; i++)
+                //{
+                //    string rowID = list[i];
+                //    string content = judgementDelete(rowID, isShow);
+                //    if (string.IsNullOrEmpty(content))
+                //    {
+                //    }
+                //}
+
+                //if (Grid1.SelectedRowIndexArray.Length == 0)
+                //{
+                //    Alert.ShowInTop("请选择一条记录！", MessageBoxIcon.Warning);
+                //    return;
+                //}
+                //string jotIdList = string.Join(",", Grid1.SelectedRowIDArray);
+                //PageContext.RegisterStartupScript(Window10.GetShowReference(String.Format("JointInfoBatchModity.aspx?jotIdList={0}", jotIdList, "批量修改 - ")));
+            }
+            else
+            {
+                ShowNotify("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
+            }
+        }
     }
 }

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfo.aspx.designer.cs

@@ -195,13 +195,13 @@ namespace FineUIPro.Web.HJGL.WeldingManage
         protected global::FineUIPro.Button btnBatchAdd;
 
         /// <summary>
-        /// btnBatchModify 控件。
+        /// btnBatchUpdate 控件。
         /// </summary>
         /// <remarks>
         /// 自动生成的字段。
         /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
         /// </remarks>
-        protected global::FineUIPro.Button btnBatchModify;
+        protected global::FineUIPro.Button btnBatchUpdate;
 
         /// <summary>
         /// btnBatchDel 控件。
@@ -221,15 +221,6 @@ namespace FineUIPro.Web.HJGL.WeldingManage
         /// </remarks>
         protected global::FineUIPro.Button btnOut;
 
-        /// <summary>
-        /// btnFileName 控件。
-        /// </summary>
-        /// <remarks>
-        /// 自动生成的字段。
-        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
-        /// </remarks>
-        protected global::FineUIPro.Button btnFileName;
-
         /// <summary>
         /// hdColumn 控件。
         /// </summary>
@@ -293,6 +284,15 @@ namespace FineUIPro.Web.HJGL.WeldingManage
         /// </remarks>
         protected global::FineUIPro.ToolbarFill ToolbarFill2;
 
+        /// <summary>
+        /// btnBatchModify 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnBatchModify;
+
         /// <summary>
         /// btnPrint 控件。
         /// </summary>
@@ -320,6 +320,15 @@ namespace FineUIPro.Web.HJGL.WeldingManage
         /// </remarks>
         protected global::FineUIPro.Button btnSelectColumn;
 
+        /// <summary>
+        /// btnFileName 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnFileName;
+
         /// <summary>
         /// Toolbar4 控件。
         /// </summary>
@@ -536,6 +545,15 @@ namespace FineUIPro.Web.HJGL.WeldingManage
         /// </remarks>
         protected global::FineUIPro.Window Window9;
 
+        /// <summary>
+        /// Window10 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Window Window10;
+
         /// <summary>
         /// Menu1 控件。
         /// </summary>

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoBatchModity.aspx

@@ -0,0 +1,172 @@
+<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="JointInfoBatchModity.aspx.cs" Inherits="FineUIPro.Web.HJGL.WeldingManage.JointInfoBatchModity" %>
+
+<!DOCTYPE html>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head runat="server">
+    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
+    <title>批量修改焊口信息</title>
+    <link href="../../res/css/common.css" rel="stylesheet" type="text/css" />
+</head>
+<body>
+    <form id="form1" runat="server">
+        <f:PageManager ID="PageManager1" AutoSizePanelID="Panel1" runat="server" />
+        <f:Form ID="SimpleForm1" ShowBorder="true" ShowHeader="false" AutoScroll="true" BodyPadding="10px"
+            runat="server" RedStarPosition="BeforeText" LabelAlign="Right">
+            <Toolbars>
+                <f:Toolbar ID="Toolbar1" Position="Top" runat="server" ToolbarAlign="Right">
+                    <Items>
+                        <f:Label ID="txtJointNoS" runat="server" Label="修改的焊口" LabelAlign="Right">
+</f:Label>                        
+                        <f:ToolbarFill ID="ToolbarFill1" runat="server"></f:ToolbarFill>
+                        <f:Button ID="btnSave" Icon="SystemSave" runat="server" Text="提交" ValidateForms="SimpleForm1"
+                            OnClick="btnSave_Click">
+                        </f:Button>
+                    </Items>
+                </f:Toolbar>
+            </Toolbars>
+            <Rows>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="drpInstallationId" Label="装置" runat="server" ShowRedStar="true"
+                            Required="true" EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlSTE1" Label="材质1" runat="server" ShowRedStar="true" Required="true"
+                            EnableEdit="true" LabelWidth="100px" AutoPostBack="true" OnSelectedIndexChanged="ddlSTE1_SelectedIndexChanged">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlSTE2" Label="材质2" runat="server" EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlJOTY_ID" Label="焊缝类型" runat="server" ShowRedStar="true" Required="true"
+                            EnableEdit="true" LabelWidth="100px" AutoPostBack="true" OnSelectedIndexChanged="ddlJOTY_ID_SelectedIndexChanged">
+                        </f:DropDownList>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="ddlJST_ID" Label="坡口类型" runat="server" ShowRedStar="true" Required="true"
+                            EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlJointAttribute" Label="焊口属性" runat="server" ShowRedStar="true"
+                            Required="true" EnableEdit="true" LabelWidth="100px" AutoPostBack="true" OnSelectedIndexChanged="ddlJointAttribute_SelectedIndexChanged">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlWME_ID" Label="焊接方法" runat="server" ShowRedStar="true" Required="true"
+                            EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlWLO_CODE" Label="焊接区域" runat="server" EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:TextBox ID="txtJointDesc" Label="焊口规格" ShowRedStar="true" Required="true" runat="server"
+                            LabelWidth="100px">
+                        </f:TextBox>
+                        <f:TextBox ID="txtDial" Label="外径" runat="server" LabelWidth="100px" ShowRedStar="true" Required="true" AutoPostBack="true" OnTextChanged="txtDial_TextChanged">
+                        </f:TextBox>
+                        <f:NumberBox ID="txtSch" Label="壁厚" runat="server" LabelWidth="100px" DecimalPrecision="2"
+                            NoNegative="true" ShowRedStar="true" Required="true" AutoPostBack="true" OnTextChanged="txtText_TextChanged">
+                        </f:NumberBox>
+                        <f:NumberBox ID="txtSize" Label="寸径" runat="server" LabelWidth="100px" DecimalPrecision="2"
+                            NoNegative="true" ShowRedStar="true" Required="true">
+                        </f:NumberBox>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="ddlComponent1" Label="组件1号" runat="server" EnableEdit="true"
+                            LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlComponent2" Label="组件2号" runat="server" EnableEdit="true"
+                            LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:NumberBox ID="txtLastTemp" Label="后热温度" runat="server" LabelWidth="100px" DecimalPrecision="4"
+                            NoNegative="true">
+                        </f:NumberBox>
+                        <f:NumberBox ID="txtCellTemp" Label="层间温度" runat="server" LabelWidth="100px" DecimalPrecision="4"
+                            NoNegative="true">
+                        </f:NumberBox>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:NumberBox ID="txtPrepareTemp" Label="预热温度" runat="server" LabelWidth="100px" DecimalPrecision="4"
+                            NoNegative="true">
+                        </f:NumberBox>
+                        <f:DropDownList ID="ddlWeldSilk" Label="焊丝牌号" runat="server" EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:DropDownList ID="ddlWeldMat" Label="焊条牌号" runat="server" EnableEdit="true" LabelWidth="100px">
+                        </f:DropDownList>
+                        <f:TextBox ID="txtElectricity" Label="焊接电流" runat="server" LabelWidth="100px">
+                        </f:TextBox>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow ColumnWidths="25% 25% 25% 25%">
+                    <Items>
+                        <f:TextBox ID="txtVoltage" Label="焊接电压" runat="server" LabelWidth="100px">
+                        </f:TextBox>
+                        <f:TextBox ID="txtPressureTestPackageNo" Label="试压包号" runat="server" LabelWidth="100px">
+                        </f:TextBox>
+                        <f:DropDownList ID="drpIS_Proess" Label="是否热处理" runat="server" LabelWidth="100px"
+                            AutoPostBack="true" OnSelectedIndexChanged="drpIS_Proess_SelectedIndexChanged">
+                            <f:ListItem Value="0" Text="否" />
+                            <f:ListItem Value="1" Text="是" />
+                        </f:DropDownList>
+                        <f:DropDownBox runat="server" Label="热处理类型" ID="drpProessTypes" DataControlID="RadioButtonList1"
+                            EnableMultiSelect="true" ShowRedStar="true" LabelAlign="Right"
+                            LabelWidth="100px" Hidden="true">
+                            <PopPanel>
+                                <f:SimpleForm ID="SimpleForm3" BodyPadding="10px" runat="server" AutoScroll="true"
+                                    ShowBorder="True" ShowHeader="false" Hidden="true">
+                                    <Items>
+                                        <f:Label ID="Label10" runat="server" Text="请选择热处理类型：">
+                                        </f:Label>
+                                        <f:CheckBoxList ID="RadioButtonList1" ColumnNumber="1" runat="server" AutoPostBack="true" OnSelectedIndexChanged="RadioButtonList1_SelectedIndexChanged">
+                                            <f:CheckItem Value="1" Text="预热" />
+                                            <f:CheckItem Value="2" Text="消氢" />
+                                            <f:CheckItem Value="3" Text="后热" />
+                                            <f:CheckItem Value="4" Text="消应力热处理" />
+                                            <f:CheckItem Value="5" Text="稳定化处理" />
+                                        </f:CheckBoxList>
+                                    </Items>
+                                </f:SimpleForm>
+                            </PopPanel>
+                        </f:DropDownBox>
+
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="drpNDTR_ID" runat="server" Label="探伤比例" LabelWidth="100px" EnableEdit="true" Required="true" ShowRedStar="true">
+                        </f:DropDownList>
+                        <f:DropDownList ID="drpJOT_QualifiedLevel" runat="server" Label="合格等级" LabelWidth="100px" EnableEdit="true" Required="true" ShowRedStar="true">
+                        </f:DropDownList>
+                        <f:DropDownList ID="drpIsGold" Label="是否黄金口" runat="server" LabelWidth="100px"
+                            AutoPostBack="true" OnSelectedIndexChanged="drpIsGold_SelectedIndexChanged">
+                            <f:ListItem Value="0" Text="否" />
+                            <f:ListItem Value="1" Text="是" />
+                        </f:DropDownList>
+                        <f:DropDownList ID="drpIsSpecial" Label="是否特殊" runat="server" LabelWidth="100px">
+                            <f:ListItem Value="0" Text="否" />
+                            <f:ListItem Value="1" Text="是" />
+                        </f:DropDownList>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow ColumnWidths="25% 25% 50%">
+                    <Items>
+                        <f:TextBox ID="txtHardQuaStandard" runat="server" Label="硬度合格标准" LabelWidth="100px"></f:TextBox>
+                        <f:NumberBox ID="txtWeldL" Label="非常规焊缝:L(mm)" runat="server"
+                            AutoPostBack="true" OnTextChanged="txtWeldL_TextChanged" LabelWidth="100px" NoDecimal="true" NoNegative="true">
+                        </f:NumberBox>
+                        <f:Label ID="lbDef" runat="server" Label="备注" Text="非常规焊缝：仅限于支架、横缝、纵缝、环缝等焊口。非上述焊口请保持空白"></f:Label>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:TextBox ID="txtRemark" Label="备注" runat="server" LabelWidth="100px"></f:TextBox>
+                    </Items>
+                </f:FormRow>
+            </Rows>
+        </f:Form>
+    </form>
+</body>
+</html>

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoBatchModity.aspx.cs

@@ -0,0 +1,899 @@
+using BLL;
+using FineUIPro.Web.HJGL.DataIn;
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Web;
+using System.Web.UI;
+using System.Web.UI.WebControls;
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+    public partial class JointInfoBatchModity : PageBase
+    {
+        #region 定义项
+        /// <summary>
+        /// 管线主键
+        /// </summary>
+        private string ISO_ID
+        {
+            get
+            {
+                return (string)ViewState["ISO_ID"];
+            }
+            set
+            {
+                ViewState["ISO_ID"] = value;
+            }
+        }
+        #endregion
+        protected void Page_Load(object sender, EventArgs e)
+        {
+            if (!IsPostBack)
+            {
+                ///初始化下拉框
+                this.LoadDropDownList();
+                ///初始化显示信息
+                this.LoadShowInfo();
+            }
+        }
+
+        #region  加载下拉框
+        /// <summary>
+        /// 加载下拉框
+        /// </summary>
+        private void LoadDropDownList()
+        {
+            ///材质1
+            this.ddlSTE1.DataTextField = "STE_Code";
+            this.ddlSTE1.DataValueField = "STE_ID";
+            this.ddlSTE1.DataSource = BLL.HJGL_MaterialService.GetSteelList();
+            this.ddlSTE1.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlSTE1);
+
+            ///材质2
+            this.ddlSTE2.DataTextField = "STE_Code";
+            this.ddlSTE2.DataValueField = "STE_ID";
+            this.ddlSTE2.DataSource = BLL.HJGL_MaterialService.GetSteelList();
+            this.ddlSTE2.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlSTE2);
+
+            ///焊缝类型
+            this.ddlJOTY_ID.DataTextField = "JOTY_Name";
+            this.ddlJOTY_ID.DataValueField = "JOTY_ID";
+            this.ddlJOTY_ID.DataSource = BLL.HJGL_WeldService.GetJointTypeNameList("2");
+            this.ddlJOTY_ID.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlJOTY_ID);
+
+            ///坡口类型
+            this.ddlJST_ID.DataTextField = "JST_Name";
+            this.ddlJST_ID.DataValueField = "JST_ID";
+            this.ddlJST_ID.DataSource = BLL.HJGL_GrooveService.GetSlopeTypeNameList();
+            this.ddlJST_ID.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlJST_ID);
+
+            ///焊口属性
+            this.ddlJointAttribute.DataTextField = "Text";
+            this.ddlJointAttribute.DataValueField = "Value";
+            this.ddlJointAttribute.DataSource = BLL.DropListService.HJGL_JointAttributeItem();
+            this.ddlJointAttribute.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlJointAttribute);
+
+            ///焊接方法
+            this.ddlWME_ID.DataTextField = "WME_Name";
+            this.ddlWME_ID.DataValueField = "WME_ID";
+            this.ddlWME_ID.DataSource = BLL.HJGL_WeldingMethodService.GetWeldMethodNameList();
+            this.ddlWME_ID.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlWME_ID);
+
+            ///焊接区域
+            this.ddlWLO_CODE.DataTextField = "Text";
+            this.ddlWLO_CODE.DataValueField = "Value";
+            this.ddlWLO_CODE.DataSource = BLL.DropListService.HJGL_WLO_CODEItem();
+            this.ddlWLO_CODE.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlWLO_CODE);
+
+            ///组件1号
+            this.ddlComponent1.DataTextField = "COM_Name";
+            this.ddlComponent1.DataValueField = "COM_ID";
+            this.ddlComponent1.DataSource = BLL.HJGL_ComponentsService.GetComponentNameList();
+            this.ddlComponent1.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlComponent1);
+
+            ///组件2号
+            this.ddlComponent2.DataTextField = "COM_Name";
+            this.ddlComponent2.DataValueField = "COM_ID";
+            this.ddlComponent2.DataSource = BLL.HJGL_ComponentsService.GetComponentNameList();
+            this.ddlComponent2.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlComponent2);
+
+            ///焊丝
+            this.ddlWeldSilk.DataTextField = "WeldName";
+            this.ddlWeldSilk.DataValueField = "WeldId";
+            this.ddlWeldSilk.DataSource = from x in Funs.DB.View_WeldInfoDropDownLists
+                                          where x.WeldTypeName.Contains("焊丝")
+                                          select x; // BLL.HJGL_ConsumablesService.GetMaterialList("1");
+            this.ddlWeldSilk.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlWeldSilk);
+
+            ///焊条
+            this.ddlWeldMat.DataTextField = "WeldName";
+            this.ddlWeldMat.DataValueField = "WeldId";
+            this.ddlWeldMat.DataSource = from x in Funs.DB.View_WeldInfoDropDownLists
+                                         where x.WeldTypeName.Contains("焊条")
+                                         select x; //BLL.HJGL_ConsumablesService.GetMaterialList("2");
+            this.ddlWeldMat.DataBind();
+            Funs.FineUIPleaseSelect(this.ddlWeldMat);
+
+            List<Model.HandleStep> myList = new List<Model.HandleStep>();
+            myList = BLL.HJGL_PW_JointInfoService.GetProessTypes();
+            RadioButtonList1.DataTextField = "Name";
+            RadioButtonList1.DataValueField = "Id";
+            RadioButtonList1.DataSource = myList;
+            RadioButtonList1.DataBind();
+
+            this.drpInstallationId.DataTextField = "Text";
+            this.drpInstallationId.DataValueField = "Value";
+            this.drpInstallationId.DataSource = BLL.Project_InstallationService.GetInstallationList(this.CurrUser.LoginProjectId);
+            this.drpInstallationId.DataBind();
+            Funs.FineUIPleaseSelect(this.drpInstallationId);
+
+            //探伤比例
+            this.drpNDTR_ID.DataTextField = "NDTR_Name";
+            this.drpNDTR_ID.DataValueField = "NDTR_ID";
+            this.drpNDTR_ID.DataSource = BLL.HJGL_DetectionService.GetNDTRateNameList();
+            this.drpNDTR_ID.DataBind();
+            Funs.FineUIPleaseSelect(this.drpNDTR_ID);
+
+            //合格等级
+            this.drpJOT_QualifiedLevel.DataTextField = "Text";
+            this.drpJOT_QualifiedLevel.DataValueField = "Value";
+            this.drpJOT_QualifiedLevel.DataSource = BLL.DropListService.HJGL_NDTClassItem();
+            this.drpJOT_QualifiedLevel.DataBind();
+            Funs.FineUIPleaseSelect(this.drpJOT_QualifiedLevel);
+        }
+        #endregion
+
+        #region 加载页面显示信息
+        /// <summary>
+        /// 加载页面显示信息
+        /// </summary>
+        private void LoadShowInfo()
+        {
+            string jotIdStr = Request.Params["jotIdList"];
+            if (!string.IsNullOrEmpty(jotIdStr))
+            {
+                var jotIdList = jotIdStr.Split(',');
+                txtJointNoS.Text = BLL.HJGL_PW_JointInfoService.ConvertJointCodeString(jotIdStr);
+                var jointInfo = BLL.HJGL_PW_JointInfoService.GetJointInfoByJotID(jotIdList[0]);
+                this.ISO_ID = jointInfo.ISO_ID;
+                if (jointInfo != null)
+                {
+                    this.txtJointDesc.Text = jointInfo.JOT_JointDesc;
+                    if (!string.IsNullOrEmpty(jointInfo.DReportID))
+                    {
+                        this.drpNDTR_ID.Enabled = false;
+                        this.drpIsGold.Enabled = false;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.STE_ID))
+                    {
+                        this.ddlSTE1.SelectedValue = jointInfo.STE_ID;
+                        var ste = BLL.HJGL_MaterialService.GetSteelBySteID(jointInfo.STE_ID);
+                        if (ste != null)
+                        {
+                            this.txtHardQuaStandard.Text = ste.HardQuaStandard;
+                        }
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.STE_ID2))
+                    {
+                        this.ddlSTE2.SelectedValue = jointInfo.STE_ID2;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOTY_ID))
+                    {
+                        this.ddlJOTY_ID.SelectedValue = jointInfo.JOTY_ID;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JST_ID))
+                    {
+                        this.ddlJST_ID.SelectedValue = jointInfo.JST_ID;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_JointAttribute))
+                    {
+                        this.ddlJointAttribute.SelectedValue = jointInfo.JOT_JointAttribute;
+                        //if (this.ddlJointAttribute.SelectedValue == "固定")
+                        //{
+                        //    if (this.txtJointNo.Text.Trim().Last() != 'G')
+                        //    {
+                        //        this.txtJointNo.Text = this.txtJointNo.Text.Trim() + "G";
+                        //    }
+                        //}
+                        //else
+                        //{
+                        //    if (this.txtJointNo.Text.Trim().Last() == 'G')
+                        //    {
+                        //        this.txtJointNo.Text = this.txtJointNo.Text.Trim().Replace("G", "");
+                        //    }
+                        //}
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.WME_ID))
+                    {
+                        this.ddlWME_ID.SelectedValue = jointInfo.WME_ID;
+                    }
+                    this.txtSize.Text = Convert.ToString(jointInfo.JOT_Size);
+                    this.txtDial.Text = (jointInfo.JOT_Dia ?? 0).ToString("N2");
+                    this.txtSch.Text = jointInfo.JOT_Sch;
+                    if (!string.IsNullOrEmpty(jointInfo.WLO_Code))
+                    {
+                        this.ddlWLO_CODE.SelectedValue = jointInfo.WLO_Code;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_Component1))
+                    {
+                        this.ddlComponent1.SelectedValue = jointInfo.JOT_Component1;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_Component2))
+                    {
+                        this.ddlComponent2.SelectedValue = jointInfo.JOT_Component2;
+                    }
+                    this.txtLastTemp.Text = Convert.ToString(jointInfo.JOT_LastTemp);
+                    this.txtCellTemp.Text = Convert.ToString(jointInfo.JOT_CellTemp);
+                    this.txtPrepareTemp.Text = Convert.ToString(jointInfo.JOT_PrepareTemp);
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_WeldSilk))
+                    {
+                        this.ddlWeldSilk.SelectedValue = jointInfo.JOT_WeldSilk;
+                    }
+                    if (jointInfo.WeldL != null)
+                    {
+                        this.txtWeldL.Text = jointInfo.WeldL.ToString();
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_WeldMat))
+                    {
+                        this.ddlWeldMat.SelectedValue = jointInfo.JOT_WeldMat;
+                    }
+                    this.txtElectricity.Text = jointInfo.JOT_Electricity;
+                    this.txtVoltage.Text = jointInfo.JOT_Voltage;
+                    if (!string.IsNullOrEmpty(jointInfo.IS_Proess))
+                    {
+                        this.drpIS_Proess.SelectedValue = jointInfo.IS_Proess;
+                        if (jointInfo.IS_Proess == "1")
+                        {
+                            this.drpProessTypes.Hidden = false;
+                            if (!string.IsNullOrEmpty(jointInfo.ProessTypes))
+                            {
+                                string[] proessTypes = jointInfo.ProessTypes.Split('|');
+                                this.drpProessTypes.Values = proessTypes;
+                            }
+                        }
+                    }
+                    if (jointInfo.IsSpecial == true)
+                    {
+                        this.drpIsSpecial.SelectedValue = "1";
+                    }
+                    else
+                    {
+                        this.drpIsSpecial.SelectedValue = "0";
+                    }
+                    this.txtRemark.Text = jointInfo.JOT_Remark;
+                    if (!string.IsNullOrEmpty(jointInfo.InstallationId))
+                    {
+                        this.drpInstallationId.Items.Clear();
+                        this.drpInstallationId.DataTextField = "Text";
+                        this.drpInstallationId.DataValueField = "Value";
+                        this.drpInstallationId.DataSource = BLL.Project_InstallationService.GetInstallationList(jointInfo.ProjectId);
+                        this.drpInstallationId.DataBind();
+                        Funs.FineUIPleaseSelect(this.drpInstallationId);
+                        this.drpInstallationId.SelectedValue = jointInfo.InstallationId;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.NDTR_ID))
+                    {
+                        this.drpNDTR_ID.SelectedValue = jointInfo.NDTR_ID;
+                    }
+                    if (!string.IsNullOrEmpty(jointInfo.JOT_QualifiedLevel))
+                    {
+                        this.drpJOT_QualifiedLevel.SelectedValue = jointInfo.JOT_QualifiedLevel;
+                    }
+                    this.txtPressureTestPackageNo.Text = jointInfo.PressureTestPackageNo;
+                    if (jointInfo.IsGold == true)
+                    {
+                        this.drpIsGold.SelectedValue = "1";
+                        this.drpNDTR_ID.Enabled = false;
+                    }
+                    else
+                    {
+                        this.drpIsGold.SelectedValue = "0";
+                    }
+                }
+            }
+        }
+        #endregion
+
+        #region 文本框是否可编辑
+        /// <summary>
+        /// 文本框是否可编辑
+        /// </summary>
+        /// <param name="readOnly"></param>
+        private void TextIsReadOnly(bool readOnly)
+        {
+            //this.btnSave.Hidden = readOnly;
+            //this.txtJointNo.Readonly = readOnly;
+            this.ddlWLO_CODE.Enabled = !readOnly;
+            this.ddlSTE1.Enabled = !readOnly;
+            this.ddlSTE2.Enabled = !readOnly;
+            this.ddlComponent1.Enabled = !readOnly;
+            this.ddlComponent2.Enabled = !readOnly;
+            this.txtJointDesc.Readonly = readOnly;
+            this.ddlJOTY_ID.Enabled = !readOnly;
+            this.txtSize.Readonly = readOnly;
+            this.txtDial.Readonly = readOnly;
+            this.ddlJST_ID.Enabled = !readOnly;
+            this.txtSch.Readonly = readOnly;
+            this.txtLastTemp.Readonly = readOnly;
+            this.txtCellTemp.Readonly = readOnly;
+            //this.txtPrepareTemp.Readonly = readOnly;
+            this.ddlJointAttribute.Enabled = !readOnly;
+            this.ddlWME_ID.Enabled = !readOnly;
+            this.ddlWeldSilk.Enabled = !readOnly;
+            this.ddlWeldMat.Enabled = !readOnly;
+            this.txtElectricity.Readonly = readOnly;
+            this.txtVoltage.Readonly = readOnly;
+            this.txtRemark.Readonly = readOnly;
+            this.drpInstallationId.Enabled = !readOnly;
+            this.drpNDTR_ID.Enabled = !readOnly;
+            this.drpJOT_QualifiedLevel.Enabled = !readOnly;
+            this.drpIsSpecial.Enabled = !readOnly;
+            this.txtHardQuaStandard.Readonly = readOnly;
+            this.txtWeldL.Readonly = readOnly;
+        }
+        #endregion
+
+        #region 提交按钮
+        /// <summary>
+        /// 提交按钮
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void btnSave_Click(object sender, EventArgs e)
+        {
+            if (CommonService.GetAllButtonPowerList(this.CurrUser.LoginProjectId, this.CurrUser.UserId, Const.HJGL_JointInfoMenuId, Const.BtnSave))
+            {
+                if (this.drpInstallationId.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.drpInstallationId.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择装置！", MessageBoxIcon.Warning);
+                    return;
+                }
+                    if (this.ddlSTE1.SelectedValue == BLL.Const._Null || string.IsNullOrEmpty(this.ddlSTE1.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择材质1！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.ddlJOTY_ID.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.ddlJOTY_ID.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择焊缝类型！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.ddlJST_ID.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.ddlJST_ID.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择坡口类型！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.ddlJointAttribute.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.ddlJointAttribute.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择焊口属性！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.ddlWME_ID.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.ddlWME_ID.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择焊接方法！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.drpNDTR_ID.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.drpNDTR_ID.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择探伤比例！", MessageBoxIcon.Warning);
+                    return;
+                }
+                if (this.drpJOT_QualifiedLevel.SelectedValue == BLL.Const._Null||string.IsNullOrEmpty(this.drpJOT_QualifiedLevel.SelectedValue))
+                {
+                    Alert.ShowInTop("请选择合格等级！", MessageBoxIcon.Warning);
+                    return;
+                }
+
+                string jotIdStr = Request.Params["jotIdList"];
+                if (!string.IsNullOrEmpty(jotIdStr))
+                {
+                    Model.SGGLDB db = Funs.DB;
+                    var jotIdList = jotIdStr.Split(',');
+                    foreach (var jotId in jotIdList)
+                    {
+                        Model.HJGL_PW_JointInfo newJointInfo = db.HJGL_PW_JointInfo.FirstOrDefault(x => x.JOT_ID == jotId);
+                        var hotItems = from x in BLL.Funs.DB.HJGL_CH_HotProessTrustItem where x.JOT_ID == jotId select x;
+                        var batchDetail = BLL.HJGL_BO_BatchDetailService.GetBatchDetailByJotId(jotId);
+                        if ((batchDetail != null || hotItems.Count() > 0) && this.CurrUser.UserId != BLL.Const.GlyId)
+                        {
+                            newJointInfo.JOT_PrepareTemp = Funs.GetNewDecimal(this.txtPrepareTemp.Text);
+                            newJointInfo.PressureTestPackageNo = this.txtPressureTestPackageNo.Text;
+                            if (this.drpIS_Proess.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.IS_Proess = this.drpIS_Proess.SelectedValue;
+                                if (this.drpIS_Proess.SelectedValue == "1")
+                                {
+                                    if (drpProessTypes.Values.Length > 0)
+                                    {
+                                        newJointInfo.ProessTypes = String.Join("|", drpProessTypes.Values);
+                                    }
+                                    else
+                                    {
+                                        Alert.ShowInTop("请选择热处理类型！", MessageBoxIcon.Warning);
+                                        return;
+                                    }
+                                }
+                            }
+                            BLL.HJGL_PW_JointInfoService.UpdateJointInfo(newJointInfo);
+                        }
+                        else
+                        {
+                            newJointInfo.JOT_JointDesc = this.txtJointDesc.Text.Trim();
+                            newJointInfo.STE_ID = this.ddlSTE1.SelectedValue;
+                            if (this.ddlSTE2.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.STE_ID2 = this.ddlSTE2.SelectedValue;
+                            }
+                            newJointInfo.JOTY_ID = this.ddlJOTY_ID.SelectedValue;
+                            newJointInfo.JST_ID = this.ddlJST_ID.SelectedValue;
+                            newJointInfo.JOT_JointAttribute = this.ddlJointAttribute.SelectedValue;
+                            newJointInfo.WME_ID = this.ddlWME_ID.SelectedValue;
+                            newJointInfo.JOT_Size = Funs.GetNewDecimal(this.txtSize.Text);
+                            newJointInfo.JOT_Dia = Funs.GetNewDecimal(this.txtDial.Text);
+                            newJointInfo.JOT_Sch = this.txtSch.Text.Trim();
+                            if (this.ddlWLO_CODE.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.WLO_Code = this.ddlWLO_CODE.SelectedValue;
+                            }
+                            if (this.ddlComponent1.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.JOT_Component1 = this.ddlComponent1.SelectedValue;
+                            }
+                            if (this.ddlComponent2.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.JOT_Component2 = this.ddlComponent2.SelectedValue;
+                            }
+                            newJointInfo.JOT_LastTemp = Funs.GetNewDecimal(this.txtLastTemp.Text);
+                            newJointInfo.JOT_CellTemp = Funs.GetNewDecimal(this.txtCellTemp.Text);
+                            newJointInfo.JOT_PrepareTemp = Funs.GetNewDecimal(this.txtPrepareTemp.Text);
+                            if (this.ddlWeldSilk.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.JOT_WeldSilk = this.ddlWeldSilk.SelectedValue;
+                            }
+                            if (this.ddlWeldMat.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.JOT_WeldMat = this.ddlWeldMat.SelectedValue;
+                            }
+                            newJointInfo.JOT_Electricity = this.txtElectricity.Text.Trim();
+                            newJointInfo.JOT_Voltage = this.txtVoltage.Text.Trim();
+                            if (this.drpIS_Proess.SelectedValue != BLL.Const._Null)
+                            {
+                                newJointInfo.IS_Proess = this.drpIS_Proess.SelectedValue;
+                                if (this.drpIS_Proess.SelectedValue == "1")
+                                {
+                                    if (drpProessTypes.Values.Length > 0)
+                                    {
+                                        newJointInfo.ProessTypes = String.Join("|", drpProessTypes.Values);
+                                    }
+                                    else
+                                    {
+                                        Alert.ShowInTop("请选择热处理类型！", MessageBoxIcon.Warning);
+                                        return;
+                                    }
+                                }
+                            }
+                            newJointInfo.JOT_Remark = this.txtRemark.Text;
+                            newJointInfo.PressureTestPackageNo = this.txtPressureTestPackageNo.Text;
+                            newJointInfo.InstallationId = this.drpInstallationId.SelectedValue;
+                            newJointInfo.NDTR_ID = this.drpNDTR_ID.SelectedValue;
+                            newJointInfo.JOT_QualifiedLevel = this.drpJOT_QualifiedLevel.SelectedValue;
+                            if (this.drpIsSpecial.SelectedValue == "1")
+                            {
+                                newJointInfo.IsSpecial = true;
+                            }
+                            else
+                            {
+                                newJointInfo.IsSpecial = false;
+                            }
+                            if (this.drpIsGold.SelectedValue == "1")
+                            {
+                                newJointInfo.IsGold = true;
+                            }
+                            else
+                            {
+                                newJointInfo.IsGold = false;
+                            }
+                            if (!string.IsNullOrEmpty(this.txtWeldL.Text))
+                            {
+                                newJointInfo.WeldL = Convert.ToInt32(this.txtWeldL.Text);
+                            }
+                            newJointInfo.JOT_JointStatus = "100";
+                            newJointInfo.JOT_TrustFlag = "00";
+                            newJointInfo.JOT_CheckFlag = "00";
+                            if (newJointInfo.DReportID != null)
+                            {
+                                BLL.HJGL_PW_JointInfoService.UpdateJointNoAddG(jotId, this.ddlJointAttribute.SelectedValue, Const.BtnModify);
+                            }
+                            var joty = BLL.HJGL_WeldService.GetJointTypeByID(newJointInfo.JOTY_ID);
+                            if (joty != null)
+                            {
+                                var jot = BLL.HJGL_PW_JointInfoService.GetJointInfoByJotID(jotId);
+                                if (jot != null)
+                                {
+                                    if (!string.IsNullOrEmpty(jot.JOT_JointNo))
+                                    {
+                                        if (joty.JOTY_Group == "2")//角焊缝（承插）
+                                        {
+                                            if (char.IsDigit(jot.JOT_JointNo[0]))
+                                            {
+                                                newJointInfo.JOT_JointNo = "C" + jot.JOT_JointNo;
+                                            }
+                                            else
+                                            {
+                                                newJointInfo.JOT_JointNo = "C" + jot.JOT_JointNo.Substring(1);
+                                            }
+                                        }
+                                        else if (joty.JOTY_Group == "3")//支管连接焊缝
+                                        {
+                                            if (char.IsDigit(jot.JOT_JointNo[0]))
+                                            {
+                                                newJointInfo.JOT_JointNo = "D" + jot.JOT_JointNo;
+                                            }
+                                            else
+                                            {
+                                                newJointInfo.JOT_JointNo = "D" + jot.JOT_JointNo.Substring(1);
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                            BLL.HJGL_PW_JointInfoService.UpdateJointInfo(newJointInfo);
+
+                            //// 更新排序字段
+                            string strSort = @"UPDATE dbo.HJGL_PW_JointInfo SET 
+                                                       Sort1=(case when PATINDEX('[A-Z]%',JOT_JointNo)>0   THEN 'B'
+                                                                   WHEN ISNUMERIC(JOT_JointNo)=1 then 'C' ELSE  'C' END),
+                            Sort2=(CASE WHEN ISNUMERIC(JOT_JointNo)=1 then try_cast(REPLACE(JOT_JointNo,'.','') AS INT)
+                                                                   WHEN ISNUMERIC(SUBSTRING(JOT_JointNo,0,CHARINDEX('Z',JOT_JointNo)))=1 
+                                                                   THEN TRY_CAST(SUBSTRING(JOT_JointNo,0,CHARINDEX('Z',JOT_JointNo)) as int)
+                                                                   WHEN PATINDEX('[0-9]%',JOT_JointNo)>0 then 
+                                                                   TRY_CAST(left(JOT_JointNo,PATINDEX('%[^0-9]%',JOT_JointNo)-1) as int)
+                                                                   ELSE 0  END),
+                                                       Sort3= SUBSTRING(JOT_JointNo,1,1),
+                                                       Sort4=(CASE WHEN CHARINDEX('Z',JOT_JointNo)>0 and SUBSTRING(JOT_JointNo,1,1)<>'Z' 
+                                                                    THEN ISNULL(TRY_CAST(SUBSTRING(replace(JOT_JointNo,'#',''),2,CHARINDEX('Z',JOT_JointNo)-2) as int),0)   
+                                                                 WHEN PATINDEX('%[A-G]%',SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)))>0 
+                                                                 THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,2,len(JOT_JointNo)-2) as int),0)
+                                                                    ELSE ISNULL(TRY_CAST(SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)) as int),0) END),
+                                                       Sort5=(CASE WHEN CHARINDEX('Z',JOT_JointNo)>0 
+                                                                   THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,charindex('Z',JOT_JointNo)+1,len(JOT_JointNo)) AS INT),0)
+                                                                WHEN PATINDEX('%[A-Y]',SUBSTRING(replace(JOT_JointNo,'#',''),2,len(JOT_JointNo)))>0 
+                                                                THEN ISNULL(TRY_CAST(SUBSTRING(JOT_JointNo,2,len(JOT_JointNo)-1) as int),0) ELSE 0 END)
+                                                  WHERE JOT_ID='" + jotId+ "'";
+                            SQLHelper.ExecutSql(strSort);
+                        }
+                    }
+                }               
+                PageContext.RegisterStartupScript(ActiveWindow.GetHidePostBackReference());
+                ShowNotify("提交成功！", MessageBoxIcon.Success);
+            }
+            else
+            {
+                Alert.ShowInTop("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
+                return;
+            }
+        }
+        #endregion
+
+        #region 格式化字符串
+        /// <summary>
+        /// 材质1下拉选择事件
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void ddlSTE1_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            if (this.ddlSTE1.SelectedValue != BLL.Const._Null)
+            {
+                var ste = BLL.HJGL_MaterialService.GetSteelBySteID(this.ddlSTE1.SelectedValue);
+                if (ste != null)
+                {
+                    this.txtHardQuaStandard.Text = ste.HardQuaStandard;
+                }
+                else
+                {
+                    this.txtHardQuaStandard.Text = string.Empty;
+                }
+                this.ddlSTE2.SelectedValue = ddlSTE1.SelectedValue;
+            }
+            else
+            {
+                this.txtHardQuaStandard.Text = string.Empty;
+            }
+        }
+
+        /// <summary>
+        /// 焊缝类型下拉选择事件
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void ddlJOTY_ID_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            if (this.ddlJOTY_ID.SelectedValue != BLL.Const._Null)
+            {
+                var joty = BLL.HJGL_WeldService.GetJointTypeByID(this.ddlJOTY_ID.SelectedValue);
+                if (joty != null)
+                {
+                    var isoInfo = BLL.HJGL_PW_IsoInfoService.GetIsoInfoByIsoInfoId(this.ISO_ID);
+                    if (isoInfo != null)
+                    {
+                        if (joty.JOTY_Group == "1")//对接
+                        {
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_B_Rate))
+                            {
+                                this.drpNDTR_ID.SelectedValue = isoInfo.Joty_B_Rate;
+                            }
+                            else
+                            {
+                                this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                            }
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_B_Level))
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = isoInfo.Joty_B_Level;
+                            }
+                            else
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = BLL.Const._Null;
+                            }
+                        }
+                        else if (joty.JOTY_Group == "2")//角焊缝（承插）
+                        {
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_C_Rate))
+                            {
+                                this.drpNDTR_ID.SelectedValue = isoInfo.Joty_C_Rate;
+                            }
+                            else
+                            {
+                                this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                            }
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_C_Level))
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = isoInfo.Joty_C_Level;
+                            }
+                            else
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = BLL.Const._Null;
+                            }
+                            //焊口号前自动加C
+                            //string jointNo = this.txtJointNo.Text.Trim();
+                            //if (!string.IsNullOrEmpty(jointNo))
+                            //{
+                            //    if (char.IsDigit(jointNo[0]))
+                            //    {
+                            //        this.txtJointNo.Text = "C" + jointNo;
+                            //    }
+                            //    else
+                            //    {
+                            //        this.txtJointNo.Text = "C" + jointNo.Substring(1);
+                            //    }
+                            //}
+                            //else
+                            //{
+                            //    this.txtJointNo.Text = "C";
+                            //}
+                        }
+                        else if (joty.JOTY_Group == "3")//支管连接焊缝
+                        {
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_D_Rate))
+                            {
+                                this.drpNDTR_ID.SelectedValue = isoInfo.Joty_D_Rate;
+                            }
+                            else
+                            {
+                                this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                            }
+                            if (!string.IsNullOrEmpty(isoInfo.Joty_D_Level))
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = isoInfo.Joty_D_Level;
+                            }
+                            else
+                            {
+                                this.drpJOT_QualifiedLevel.SelectedValue = BLL.Const._Null;
+                            }
+                            ////焊口号前自动加D
+                            //string jointNo = this.txtJointNo.Text.Trim();
+                            //if (!string.IsNullOrEmpty(jointNo))
+                            //{
+                            //    if (char.IsDigit(jointNo[0]))
+                            //    {
+                            //        this.txtJointNo.Text = "D" + jointNo;
+                            //    }
+                            //    else
+                            //    {
+                            //        this.txtJointNo.Text = "D" + jointNo.Substring(1);
+                            //    }
+                            //}
+                            //else
+                            //{
+                            //    this.txtJointNo.Text = "D";
+                            //}
+                        }
+                    }
+                }
+                else
+                {
+                    this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                    this.drpJOT_QualifiedLevel.SelectedValue = BLL.Const._Null;
+                }
+            }
+            else
+            {
+                this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                this.drpJOT_QualifiedLevel.SelectedValue = BLL.Const._Null;
+            }
+        }
+
+        /// <summary>
+        /// 焊工属性下拉选择事件
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void ddlJointAttribute_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            //if (this.ddlJointAttribute.SelectedValue == "固定")
+            //{
+                //if (this.txtJointNo.Text.Trim().Last() != 'G')
+                //{
+                //    this.txtJointNo.Text = this.txtJointNo.Text.Trim() + "G";
+                //}
+            //}
+            //else
+            //{
+                //if (this.txtJointNo.Text.Trim().Last() == 'G')
+                //{
+                //    this.txtJointNo.Text = this.txtJointNo.Text.Trim().Replace("G", "");
+                //}
+            //}
+        }
+
+        /// <summary>
+        /// 根据寸经外径对照表，输入外径是自动得到寸径；焊口规格：Φ外径*壁厚
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void txtText_TextChanged(object sender, EventArgs e)
+        {
+            //根据寸经外径对照表，输入外径是自动得到寸径
+            if (!string.IsNullOrEmpty(this.txtDial.Text.Trim()))
+            {
+                decimal dia = Funs.GetNewDecimalOrZero(this.txtDial.Text.Trim());
+                if (dia >= 500)
+                {
+                    this.drpIsSpecial.SelectedValue = "1";
+                }
+                var inch = HJGL_ControlService.GetSizeByDia(dia);
+                if (inch != null)
+                {
+                    this.txtSize.Text = Convert.ToString(inch);
+                }
+            }
+
+            //焊口规格：Φ外径*壁厚
+            if (!string.IsNullOrEmpty(this.txtDial.Text.Trim()) && !string.IsNullOrEmpty(this.txtSch.Text.Trim()))
+            {
+                this.txtJointDesc.Text = "Φ" + this.txtDial.Text.Trim() + "×" + this.txtSch.Text.Trim();
+            }
+        }
+
+        /// <summary>
+        /// 是否显示热处理类型
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void drpIS_Proess_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            if (this.drpIS_Proess.SelectedValue == "1")
+            {
+                this.drpProessTypes.Hidden = false;
+            }
+            else
+            {
+                this.drpProessTypes.Hidden = true;
+            }
+        }
+
+        /// <summary>
+        /// 热处理类型选择变化事件
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void RadioButtonList1_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            string jotIdStr = Request.Params["jotIdList"];
+            var jotIdList = jotIdStr.Split(',');
+            //已委托的热处理类型
+            var isTrustProessTypes = from x in BLL.Funs.DB.HJGL_CH_HotProessTrustItem where x.JOT_ID == jotIdList[0] select x.ProessTypes;
+            if (drpProessTypes.Values.Length > 0)
+            {
+                List<string> strs = this.RadioButtonList1.SelectedValueArray.ToList();
+                foreach (var isTrustProessType in isTrustProessTypes)   //已委托的热处理类型不能去除
+                {
+                    if (!strs.Contains(isTrustProessType))
+                    {
+                        strs.Add(isTrustProessType);
+                    }
+                }
+                this.RadioButtonList1.SelectedValueArray = strs.ToArray();
+                this.drpProessTypes.Values = strs.ToArray();
+                string proessTypes = String.Join("|", drpProessTypes.Values);
+                this.drpProessTypes.Text = BLL.HJGL_PW_JointInfoService.ConvertProessTypes(proessTypes);
+            }
+            else
+            {
+                Alert.ShowInTop("请选择热处理类型！", MessageBoxIcon.Warning);
+                return;
+            }
+        }
+
+        protected void drpIsGold_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            //var jotIdList = jotIdStr.Split(',');
+            //foreach (var item in jotIdList)
+            //{
+                if (this.drpIsGold.SelectedValue == "1")
+                {
+                    this.drpNDTR_ID.SelectedValue = "e2612188-fc99-492a-937c-74c7a0151656";   //黄金口检测比例100%
+                    this.drpNDTR_ID.Enabled = false;
+                    //this.txtJointNoPrix.Text =BLL.HJGL_PW_JointInfoService.GetJointInfoByJotID(item).JOT_JointNo + "H";
+                }
+                else
+                {
+                    this.drpNDTR_ID.SelectedValue = BLL.Const._Null;
+                    this.drpNDTR_ID.Enabled = true;
+                    //string jotNo= BLL.HJGL_PW_JointInfoService.GetJointInfoByJotID(item).JOT_JointNo;
+                    //this.txtJointNo.Text = this.txtJointNo.Text.Trim().Substring(0, this.txtJointNo.Text.Trim().Length - 1);
+                }
+            //}                
+        }
+
+        /// <summary>
+        /// 外径输入事件
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void txtDial_TextChanged(object sender, EventArgs e)
+        {
+            //根据寸经外径对照表，输入外径是自动得到寸径
+            if (!string.IsNullOrEmpty(this.txtDial.Text.Trim()))
+            {
+                decimal dia = Funs.GetNewDecimalOrZero(this.txtDial.Text.Trim());
+                if (dia >= 500)
+                {
+                    this.drpIsSpecial.SelectedValue = "1";
+                }
+                var inch = HJGL_ControlService.GetSizeByDia(dia);
+                if (inch != null)
+                {
+                    this.txtSize.Text = Convert.ToString(inch);
+                }
+            }
+
+            //焊口规格：Φ外径*壁厚
+            if (!string.IsNullOrEmpty(this.txtDial.Text.Trim()) && !string.IsNullOrEmpty(this.txtSch.Text.Trim()))
+            {
+                this.txtJointDesc.Text = "Φ" + this.txtDial.Text.Trim() + "×" + this.txtSch.Text.Trim();
+            }
+        }
+
+        // 非常规焊缝
+        protected void txtWeldL_TextChanged(object sender, EventArgs e)
+        {
+            if (!string.IsNullOrEmpty(this.txtWeldL.Text.Trim()))
+            {
+                this.txtJointDesc.Text = "L=" + this.txtWeldL.Text.Trim() + "×" + this.txtSch.Text.Trim();
+            }
+        }
+        #endregion
+    }
+}

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoBatchModity.aspx.designer.cs

@@ -0,0 +1,395 @@
+//------------------------------------------------------------------------------
+// <自动生成>
+//     此代码由工具生成。
+//
+//     对此文件的更改可能导致不正确的行为，如果
+//     重新生成代码，则所做更改将丢失。
+// </自动生成>
+//------------------------------------------------------------------------------
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+
+
+    public partial class JointInfoBatchModity
+    {
+
+        /// <summary>
+        /// form1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::System.Web.UI.HtmlControls.HtmlForm form1;
+
+        /// <summary>
+        /// PageManager1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.PageManager PageManager1;
+
+        /// <summary>
+        /// SimpleForm1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Form SimpleForm1;
+
+        /// <summary>
+        /// Toolbar1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Toolbar Toolbar1;
+
+        /// <summary>
+        /// txtJointNoS 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Label txtJointNoS;
+
+        /// <summary>
+        /// ToolbarFill1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.ToolbarFill ToolbarFill1;
+
+        /// <summary>
+        /// btnSave 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnSave;
+
+        /// <summary>
+        /// drpInstallationId 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpInstallationId;
+
+        /// <summary>
+        /// ddlSTE1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlSTE1;
+
+        /// <summary>
+        /// ddlSTE2 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlSTE2;
+
+        /// <summary>
+        /// ddlJOTY_ID 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlJOTY_ID;
+
+        /// <summary>
+        /// ddlJST_ID 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlJST_ID;
+
+        /// <summary>
+        /// ddlJointAttribute 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlJointAttribute;
+
+        /// <summary>
+        /// ddlWME_ID 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlWME_ID;
+
+        /// <summary>
+        /// ddlWLO_CODE 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlWLO_CODE;
+
+        /// <summary>
+        /// txtJointDesc 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtJointDesc;
+
+        /// <summary>
+        /// txtDial 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtDial;
+
+        /// <summary>
+        /// txtSch 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtSch;
+
+        /// <summary>
+        /// txtSize 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtSize;
+
+        /// <summary>
+        /// ddlComponent1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlComponent1;
+
+        /// <summary>
+        /// ddlComponent2 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlComponent2;
+
+        /// <summary>
+        /// txtLastTemp 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtLastTemp;
+
+        /// <summary>
+        /// txtCellTemp 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtCellTemp;
+
+        /// <summary>
+        /// txtPrepareTemp 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtPrepareTemp;
+
+        /// <summary>
+        /// ddlWeldSilk 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlWeldSilk;
+
+        /// <summary>
+        /// ddlWeldMat 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlWeldMat;
+
+        /// <summary>
+        /// txtElectricity 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtElectricity;
+
+        /// <summary>
+        /// txtVoltage 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtVoltage;
+
+        /// <summary>
+        /// txtPressureTestPackageNo 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtPressureTestPackageNo;
+
+        /// <summary>
+        /// drpIS_Proess 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpIS_Proess;
+
+        /// <summary>
+        /// drpProessTypes 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownBox drpProessTypes;
+
+        /// <summary>
+        /// SimpleForm3 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.SimpleForm SimpleForm3;
+
+        /// <summary>
+        /// Label10 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Label Label10;
+
+        /// <summary>
+        /// RadioButtonList1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.CheckBoxList RadioButtonList1;
+
+        /// <summary>
+        /// drpNDTR_ID 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpNDTR_ID;
+
+        /// <summary>
+        /// drpJOT_QualifiedLevel 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpJOT_QualifiedLevel;
+
+        /// <summary>
+        /// drpIsGold 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpIsGold;
+
+        /// <summary>
+        /// drpIsSpecial 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList drpIsSpecial;
+
+        /// <summary>
+        /// txtHardQuaStandard 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtHardQuaStandard;
+
+        /// <summary>
+        /// txtWeldL 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.NumberBox txtWeldL;
+
+        /// <summary>
+        /// lbDef 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Label lbDef;
+
+        /// <summary>
+        /// txtRemark 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtRemark;
+    }
+}

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoOut.aspx

@@ -22,6 +22,9 @@
                         <Items>
                             <f:ToolbarFill ID="ToolbarFill1" runat="server">
                             </f:ToolbarFill>
+                            <f:Button ID="btnOut2" OnClick="btnOut2_Click" runat="server" Text="按导入模板导出" Icon="Accept"
+                                EnableAjax="false" DisableControlBeforePostBack="false">
+                            </f:Button>
                             <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="导出EXCEL" Icon="Accept"
                                 EnableAjax="false" DisableControlBeforePostBack="false">
                             </f:Button>

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoOut.aspx.cs

@@ -1,11 +1,16 @@
 namespace FineUIPro.Web.HJGL.WeldingManage
 {
+    using BLL;
+    using FastReport.DevComponents.DotNetBar;
+    using Model;
+    using NPOI.SS.UserModel;
     using System;
     using System.Collections.Generic;
     using System.Data;
     using System.Data.SqlClient;
+    using System.IO;
+    using System.Linq;
     using System.Text;
-    using BLL;
     using AspNet = System.Web.UI.WebControls;
 
     public partial class JointInfoOut : PageBase
@@ -50,7 +55,7 @@
                 // 2.获取当前分页数据
                 //var table = this.GetPagedDataTable(Grid1, tb1);
                 Grid1.RecordCount = tb.Rows.Count;
-                tb = GetFilteredTable(Grid1.FilteredData, tb);
+                //tb = GetFilteredTable(Grid1.FilteredData, tb);
                 var table = this.GetPagedDataTable(Grid1, tb);
 
                 Grid1.DataSource = table;
@@ -169,5 +174,258 @@
             return sb.ToString();
         }
         #endregion
+
+        #region 按导入模板导出
+        /// <summary>
+        /// 按导入模板导出
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void btnOut2_Click(object sender, EventArgs e)
+        {
+            string rootPath = Server.MapPath("~/");
+            string initTemplatePath = Const.JointInTemplateUrl;
+            string uploadfilepath = string.Empty;
+            string newUrl = string.Empty;
+            uploadfilepath = rootPath + initTemplatePath;
+
+
+            string isoId = Request.QueryString["ISO_ID"] ?? string.Empty;
+            if (!string.IsNullOrEmpty(isoId))
+            {
+                var lists = from x in Funs.DB.HJGL_View_JointInfo
+                            where x.ISO_ID == isoId
+                            select x;
+
+                lists = lists.OrderBy(x => x.JOTY_Group).OrderBy(x => x.Sort1).OrderBy(x => x.Sort2).OrderBy(x => x.Sort3).OrderBy(x => x.Sort4).OrderBy(x => x.Sort5);
+                if (lists != null)
+                {
+                    newUrl = uploadfilepath.Replace("焊口信息导入模板", "焊口信息");
+                    if (File.Exists(newUrl))
+                    {
+                        File.Delete(newUrl);
+                    }
+                    File.Copy(uploadfilepath, newUrl);
+                    // 第一步：读取文件流
+                    NPOI.SS.UserModel.IWorkbook workbook;
+                    using (FileStream stream = new FileStream(newUrl, FileMode.Open, FileAccess.Read))
+                    {
+                        //workbook = new NPOI.XSSF.UserModel.XSSFWorkbook(stream);
+                        workbook = new NPOI.HSSF.UserModel.HSSFWorkbook(stream);
+                    }
+                    // 创建单元格样式
+                    NPOI.SS.UserModel.ICellStyle cellStyle = workbook.CreateCellStyle();
+                    cellStyle.BorderTop = NPOI.SS.UserModel.BorderStyle.Thin;
+                    cellStyle.BorderRight = NPOI.SS.UserModel.BorderStyle.Thin;
+                    cellStyle.BorderBottom = NPOI.SS.UserModel.BorderStyle.Thin;
+                    cellStyle.BorderLeft = NPOI.SS.UserModel.BorderStyle.Thin;
+                    cellStyle.Alignment = NPOI.SS.UserModel.HorizontalAlignment.Center;
+                    cellStyle.VerticalAlignment = NPOI.SS.UserModel.VerticalAlignment.Center;
+                    cellStyle.WrapText = true;//自动换行
+                    var font = workbook.CreateFont();
+                    font.FontHeightInPoints = 11;
+                    cellStyle.SetFont(font);
+                    // 第二步：创建新数据行
+                    NPOI.SS.UserModel.ISheet sheet = workbook.GetSheetAt(0);
+                    NPOI.SS.UserModel.IRow row = sheet.GetRow(0);
+                    NPOI.SS.UserModel.ICell cell;
+                    int i = 1;
+                    foreach (var item in lists)
+                    {
+                        // 第二步：创建新数据行
+                        row = sheet.CreateRow(i);
+                        // 添加数据
+                        //施工号
+                        cell = row.CreateCell(0);
+                        cell.CellStyle = cellStyle;
+                        string proCode = string.Empty;
+                        var pro = BLL.Base_ProjectService.GetProjectByProjectId(item.ProjectId);
+                        if (pro != null)
+                        {
+                            proCode = pro.ProjectCode;
+                        }
+                        cell.SetCellValue(proCode);
+                        //管线号 
+                        cell = row.CreateCell(1);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.ISO_IsoNo);
+                        //焊口号
+                        cell = row.CreateCell(2);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_JointNo);
+                        //装置
+                        cell = row.CreateCell(3);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.InstallationName);
+                        //材质一
+                        cell = row.CreateCell(4);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.STE_Name1);
+                        //材质二
+                        cell = row.CreateCell(5);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.STE_Name2);
+                        //焊缝类型
+                        cell = row.CreateCell(6);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOTY_Name);
+                        //坡口类型
+                        cell = row.CreateCell(7);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JST_Name);
+                        //焊口属性
+                        cell = row.CreateCell(8);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_JointAttribute);
+                        //焊接方法
+                        cell = row.CreateCell(9);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.WME_Name);
+                        //外径
+                        cell = row.CreateCell(10);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Dia.HasValue ? item.JOT_Dia.ToString() : "");
+                        //壁厚
+                        cell = row.CreateCell(11);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Sch);
+                        //寸径
+                        cell = row.CreateCell(12);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Size.HasValue?item.JOT_Size.ToString():"");
+                        //焊接区域
+                        cell = row.CreateCell(13);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.WLO_Code == "F" ? "安装" : "预制");
+                        //组件一
+                        cell = row.CreateCell(14);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.Component1);
+                        //组件二
+                        cell = row.CreateCell(15);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.Component2);
+                        //后热温度
+                        cell = row.CreateCell(16);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_LastTemp.HasValue ? item.JOT_LastTemp.ToString() : "");
+                        //层间温度
+                        cell = row.CreateCell(17);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_CellTemp.HasValue ? item.JOT_CellTemp.ToString() : "");
+                        //预热温度
+                        cell = row.CreateCell(18);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_PrepareTemp.HasValue ? item.JOT_PrepareTemp.ToString() : "");
+                        //焊丝
+                        cell = row.CreateCell(19);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.WeldSilk);
+                        //焊条
+                        cell = row.CreateCell(20);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.WeldMat);
+                        //焊接电流
+                        cell = row.CreateCell(21);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Electricity);
+                        //焊接电压
+                        cell = row.CreateCell(22);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Voltage);
+                        //是否热处理
+                        cell = row.CreateCell(23);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.IS_Proess == "1" ? "是" : "否");
+                        //热处理类型(是否热处理为‘是’时填写 分别为：预热, 消氢, 后热, 消应力热处理,稳定化处理 填写时请用英文逗号隔开)
+                        cell = row.CreateCell(24);
+                        cell.CellStyle = cellStyle;
+                        string proessTypes = string.Empty;
+                        if (!string.IsNullOrEmpty(item.ProessTypes))
+                        {
+                            foreach (var t in item.ProessTypes.Split('|'))
+                            {
+                                if (t == "1")
+                                {
+                                    proessTypes += "预热,";
+                                }
+                                else if (t == "2")
+                                {
+                                    proessTypes += "消氢,";
+                                }
+                                else if (t == "3")
+                                {
+                                    proessTypes += "后热,";
+                                }
+                                else if (t == "4")
+                                {
+                                    proessTypes += "消应力热处理,";
+                                }
+                                else if (t == "5")
+                                {
+                                    proessTypes += "稳定化处理,";
+                                }
+                            }
+                            if (!string.IsNullOrEmpty(proessTypes))
+                            {
+                                proessTypes = proessTypes.Substring(0, proessTypes.LastIndexOf(","));
+                            }
+                        }
+                        cell.SetCellValue(proessTypes);
+                        //是否特殊
+                        cell = row.CreateCell(25);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.IsSpecial == true ? "是" : "否");
+                        //探伤比例
+                        cell = row.CreateCell(26);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.NDTR_Name);
+                        //合格等级
+                        cell = row.CreateCell(27);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_QualifiedLevel);
+                        //硬度合格标准
+                        cell = row.CreateCell(28);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.HardQuaStandard);
+                        //非常焊缝
+                        cell = row.CreateCell(29);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.WeldL.HasValue ? item.WeldL.ToString() : "");
+                        //黄金口（是 / 否）
+                        cell = row.CreateCell(30);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.IsGold == true ? "是" : "否");
+                        //备注
+                        cell = row.CreateCell(31);
+                        cell.CellStyle = cellStyle;
+                        cell.SetCellValue(item.JOT_Remark);
+                        i++;
+                    }
+                    // 第三步：写入文件流
+                    using (FileStream stream = new FileStream(newUrl, FileMode.Create, FileAccess.Write))
+                    {
+                        workbook.Write(stream);
+                        workbook.Close();
+                    }
+                    string fileName = Path.GetFileName(newUrl);
+                    FileInfo info = new FileInfo(newUrl);
+                    long fileSize = info.Length;
+                    Response.Clear();
+                    Response.ContentType = "application/x-zip-compressed";
+                    Response.AddHeader("Content-Disposition", "attachment;filename=" + System.Web.HttpUtility.UrlEncode(fileName, System.Text.Encoding.UTF8));
+                    Response.AddHeader("Content-Length", fileSize.ToString());
+                    Response.TransmitFile(newUrl, 0, fileSize);
+                    Response.Flush();
+                    Response.Close();
+                    File.Delete(newUrl);
+                }
+                else
+                {
+                    Alert.ShowInTop("当前无记录，无法导出！", MessageBoxIcon.Warning);
+                }
+            }
+        }
+        #endregion
     }
 }

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/JointInfoOut.aspx.designer.cs

@@ -7,10 +7,12 @@
 // </自动生成>
 //------------------------------------------------------------------------------
 
-namespace FineUIPro.Web.HJGL.WeldingManage {
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
 
 
-    public partial class JointInfoOut {
+    public partial class JointInfoOut
+    {
 
         /// <summary>
         /// form1 控件。
@@ -66,6 +68,15 @@ namespace FineUIPro.Web.HJGL.WeldingManage {
         /// </remarks>
         protected global::FineUIPro.ToolbarFill ToolbarFill1;
 
+        /// <summary>
+        /// btnOut2 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnOut2;
+
         /// <summary>
         /// btnOut 控件。
         /// </summary>

HJGL_DS/FineUIPro.Web/Web.config

@@ -67,7 +67,7 @@
       <add path="ChartImg.axd" verb="GET,POST,HEAD" type="System.Web.UI.DataVisualization.Charting.ChartHttpHandler, System.Web.DataVisualization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" validate="false"/>
       <add path="FastReport.Export.axd" verb="*" type="FastReport.Web.Handlers.WebExport"/>
     </httpHandlers>
-    <compilation debug="false" targetFramework="4.6.1">
+    <compilation debug="true" targetFramework="4.6.1">
       <assemblies>
         <add assembly="System.Web.DataVisualization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
       </assemblies>

HJGL_DS/Model/Model.cs

@@ -66384,6 +66384,18 @@ namespace Model
 		
 		private string _JOTY_Group;
 		
+		private string _JOT_Electricity;
+		
+		private string _JOT_Voltage;
+		
+		private System.Nullable<int> _WeldL;
+		
+		private System.Nullable<bool> _IsGold;
+		
+		private string _JOT_QualifiedLevel;
+		
+		private string _HardQuaStandard;
+		
 		public HJGL_View_JointInfo()
 		{
 		}
@@ -67731,6 +67743,102 @@ namespace Model
 				}
 			}
 		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_JOT_Electricity", DbType="VarChar(40)")]
+		public string JOT_Electricity
+		{
+			get
+			{
+				return this._JOT_Electricity;
+			}
+			set
+			{
+				if ((this._JOT_Electricity != value))
+				{
+					this._JOT_Electricity = value;
+				}
+			}
+		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_JOT_Voltage", DbType="VarChar(40)")]
+		public string JOT_Voltage
+		{
+			get
+			{
+				return this._JOT_Voltage;
+			}
+			set
+			{
+				if ((this._JOT_Voltage != value))
+				{
+					this._JOT_Voltage = value;
+				}
+			}
+		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_WeldL", DbType="Int")]
+		public System.Nullable<int> WeldL
+		{
+			get
+			{
+				return this._WeldL;
+			}
+			set
+			{
+				if ((this._WeldL != value))
+				{
+					this._WeldL = value;
+				}
+			}
+		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_IsGold", DbType="Bit")]
+		public System.Nullable<bool> IsGold
+		{
+			get
+			{
+				return this._IsGold;
+			}
+			set
+			{
+				if ((this._IsGold != value))
+				{
+					this._IsGold = value;
+				}
+			}
+		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_JOT_QualifiedLevel", DbType="NVarChar(10)")]
+		public string JOT_QualifiedLevel
+		{
+			get
+			{
+				return this._JOT_QualifiedLevel;
+			}
+			set
+			{
+				if ((this._JOT_QualifiedLevel != value))
+				{
+					this._JOT_QualifiedLevel = value;
+				}
+			}
+		}
+		
+		[global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_HardQuaStandard", DbType="NVarChar(50)")]
+		public string HardQuaStandard
+		{
+			get
+			{
+				return this._HardQuaStandard;
+			}
+			set
+			{
+				if ((this._HardQuaStandard != value))
+				{
+					this._HardQuaStandard = value;
+				}
+			}
+		}
 	}
 	
 	[global::System.Data.Linq.Mapping.TableAttribute(Name="dbo.HJGL_View_JointInfoAndIsoInfo")]

HJGL_DS/WebAPI/WebAPI.csproj.user

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?>
 <Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
   <PropertyGroup>
-    <LastActiveSolutionConfig>Release|Any CPU</LastActiveSolutionConfig>
+    <LastActiveSolutionConfig>Debug|Any CPU</LastActiveSolutionConfig>
     <NameOfLastUsedPublishProfile>FolderProfile</NameOfLastUsedPublishProfile>
     <UseIISExpress>true</UseIISExpress>
     <Use64BitIISExpress />