20260301 交工资料

HJGL_DS/BLL/Common/Const.cs

@@ -2456,6 +2456,16 @@ namespace BLL
         /// 特种设备安装改造维修告知书导出模板
         /// </summary>
         public const string JGZL_SpecialEquipmentMaintenanceUrl = "File\\Word\\JGZL\\特种设备安装改造维修告知书导出模板.docx";
+
+        /// <summary>
+        /// 工业管道安装质量证明书导出模板
+        /// </summary>
+        public const string JGZL_IndustrialPipelineInstallationQualityCertificateUrl = "File\\Word\\JGZL\\工业管道安装质量证明书导出模板.docx";
+
+        /// <summary>
+        /// 工业管道安装汇总表导出模板
+        /// </summary>
+        public const string JGZL_IndustrialPipelineInstallationSummaryUrl = "File\\Word\\JGZL\\工业管道安装汇总表导出模板.docx";
         #endregion
     }
 }

HJGL_DS/FineUIPro.Web/File/Word/JGZL/工业管道安装汇总表导出模板.docx

@@ -0,0 +1,103 @@
+
+                          工业管道安装汇总表
+质量证明书编号：
+交工单元名称：
+交工单元编号：
+                                      管
+                                      道
+                                      编
+                                      号
+                                      管
+                                      道
+                                      级
+                                      别
+                                   起止点
+                                    设计
+                                    压力
+                                     (MPa)
+                                    设计
+                                    温度
+                                     (℃)
+                                      介
+                                      质
+                                      材
+                                      质
+                                    规格
+                                   （mm）
+                                      长
+                                      度
+                                      (m)
+                                      铺
+                                      设
+                                      方
+                                      式
+                                      焊
+                                      口
+                                      数
+                                      量
+                                    无损
+                                    检测
+                                    方法/
+                                    比例
+                                      (%)
+                                      耐
+                                      压
+                                      试
+                                      验
+                                      方
+                                      法
+                                      耐
+                                      压
+                                      试
+                                      验
+                                      介
+                                      质
+                                    耐压
+                                    试验
+                                    压力
+                                     (MPa)
+                                    泄漏
+                                    试验
+                                    介质
+                                    泄漏
+                                    试验
+                                    压力
+                                     (MPa)
+                                    吹扫
+                                      、
+                                    清洗
+                                    方法
+                                      腐
+                                      蚀
+                                      控
+                                      制
+                                      方
+                                      式
+                                    保温
+                                 （绝热）
+                                    方式
+                                       
+                                       
+                                      起
+                                      点
+                                      终
+                                      点
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+                                       
+填表:                          日期：                              审核：                         日期：
+                           共    页    第    页

HJGL_DS/FineUIPro.Web/File/Word/JGZL/工业管道安装质量证明书导出模板.docx

@@ -0,0 +1,51 @@
+                       工业管道安装质量证明书
+                                       
+                                          编号：
+                                 工程名称
+                                       
+                                 工程编号
+                                       
+                              交工单元名称
+                                       
+                              交工单元编号
+                                       
+                              安装开工日期
+                                       
+                              安装竣工日期
+                                       
+                                 管道级别
+                                       
+                                 管道长度
+                                       
+                                 设计单位
+                                       
+                              无损检测机构
+                                       
+                                 监检机构
+                                       
+                                 建设单位
+                              （使用单位）
+                                       
+
+    本工业管道的安装经质量检验，符合《工业管道安全技术规程》(TSG 31-2025)、设计文件和             的要求。
+
+    附：《工业管道安装汇总表》共     页
+
+                              
+检验员：                         日期：
+
+
+
+    质量保证工程师：                 日期：
+                      
+                  
+                       
+                                                   安装单位 （盖章）
+
+                                                   年     月     日
+
+                                       
+特种设备生产许可证编号：
+
+
+                                       

HJGL_DS/FineUIPro.Web/HJGL/WeldingManage/PipelineManageEdit.aspx.cs

@@ -164,6 +164,7 @@
                         drpJoty_B_Rate.Enabled = true;
                         drpJoty_C_Rate.Enabled = true;
                         drpJoty_D_Rate.Enabled = true;
+                        drpIDName.Enabled = true;
                     }
                 }
 

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationQualityCertificate.aspx

@@ -40,11 +40,14 @@
                                 <f:ToolbarFill ID="ToolbarFill1" runat="server">
                                 </f:ToolbarFill>
                                 <f:Button ID="btnSave" Icon="SystemSave" runat="server" Text="保存" ValidateForms="SimpleForm1"
-    OnClick="btnSave_Click">
+                                    OnClick="btnSave_Click">
-</f:Button>
+                                </f:Button>
                                 <%--<f:Button ID="btnAdd" runat="server" Icon="Add" Text="增加" OnClick="btnAdd_Click"></f:Button>--%>
                                 <f:Button ID="btnPrint" Text="工业管道安装质量证明书打印" Icon="Printer" runat="server" OnClick="btnPrint_Click">
                                 </f:Button>
+                                <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="导出" ToolTip="导出Word" Icon="FolderUp"
+                                    EnableAjax="false" DisableControlBeforePostBack="false">
+                                </f:Button>
                             </Items>
                         </f:Toolbar>
                     </Toolbars>
@@ -110,8 +113,8 @@
                                 </f:FormRow>
                                 <f:FormRow ColumnWidths="47% 15% 38%">
                                     <Items>
-                                        <f:Label ID="lblRemark"  runat="server" Text="本工业管道的安装经质量检验，符合《工业管道安全技术规程》(TSG 31-2025)、设计文件和"></f:Label>
+                                        <f:Label ID="lblRemark" runat="server" Text="本工业管道的安装经质量检验，符合《工业管道安全技术规程》(TSG 31-2025)、设计文件和"></f:Label>
-                                        <f:TextBox ID="txtRemark" runat="server" ></f:TextBox>
+                                        <f:TextBox ID="txtRemark" runat="server"></f:TextBox>
                                         <f:Label ID="lbld" runat="server" Text="的要求。"></f:Label>
                                     </Items>
                                 </f:FormRow>

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationQualityCertificate.aspx.cs

@@ -8,6 +8,7 @@ using System.Web;
 using System.Web.UI;
 using System.Web.UI.WebControls;
 using System.IO;
+using Aspose.Words;
 
 namespace FineUIPro.Web.JGZL
 {
@@ -627,5 +628,141 @@ namespace FineUIPro.Web.JGZL
             }
         }
         #endregion
+
+        #region 导出按钮
+        /// 导出按钮
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void btnOut_Click(object sender, EventArgs e)
+        {
+            string rootPath = Server.MapPath("~/");
+            string initTemplatePath = string.Empty;
+            string uploadfilepath = string.Empty;
+            string newUrl = string.Empty;
+            string filePath = string.Empty;
+
+            string projectId = this.tvControlItem.SelectedNodeID;
+            if (!string.IsNullOrEmpty(projectId))
+            {
+                var report = BLL.IndustrialPipelineInstallationQualityCertificateService.GetIndustrialPipelineInstallationQualityCertificateByProjectId(projectId);
+                if (report != null)
+                {
+                    initTemplatePath = Const.JGZL_IndustrialPipelineInstallationQualityCertificateUrl;
+                    uploadfilepath = rootPath + initTemplatePath;
+
+                    newUrl = uploadfilepath.Replace("工业管道安装质量证明书导出模板", "工业管道安装质量证明书");
+                    if (File.Exists(newUrl))
+                    {
+                        File.Delete(newUrl);
+                    }
+                    File.Copy(uploadfilepath, newUrl);
+                    Document doc = new Aspose.Words.Document(uploadfilepath);
+
+                    Bookmark certificateCode = doc.Range.Bookmarks["CertificateCode"];
+                    if (certificateCode != null)
+                    {
+                        certificateCode.Text = report.CertificateCode;
+                    }
+                    Bookmark engineeringName = doc.Range.Bookmarks["EngineeringName"];
+                    if (engineeringName != null)
+                    {
+                        engineeringName.Text = BLL.Base_ProjectService.GetProjectByProjectId(projectId).ProjectName;
+                    }
+                    Bookmark engineeringCode = doc.Range.Bookmarks["EngineeringCode"];
+                    if (engineeringCode != null)
+                    {
+                        engineeringCode.Text = BLL.Base_ProjectService.GetProjectByProjectId(projectId).ProjectCode;
+                    }
+                    Bookmark deliveryUnit = doc.Range.Bookmarks["DeliveryUnit"];
+                    if (deliveryUnit != null)
+                    {
+                        deliveryUnit.Text = report.DeliveryUnit;
+                    }
+                    Bookmark deliveryUnitCode = doc.Range.Bookmarks["DeliveryUnitCode"];
+                    if (deliveryUnitCode != null)
+                    {
+                        deliveryUnitCode.Text = report.DeliveryUnitCode;
+                    }
+                    Bookmark installStartDate = doc.Range.Bookmarks["InstallStartDate"];
+                    if (installStartDate != null)
+                    {
+                        installStartDate.Text = report.InstallStartDate.HasValue ? string.Format("{0:yyyy-MM-dd}", report.InstallStartDate) : "";
+                    }
+                    Bookmark installEndDate = doc.Range.Bookmarks["InstallEndDate"];
+                    if (installEndDate != null)
+                    {
+                        installEndDate.Text = report.InstallEndDate.HasValue ? string.Format("{0:yyyy-MM-dd}", report.InstallEndDate) : "";
+                    }
+                    Bookmark pipelineLevel = doc.Range.Bookmarks["PipelineLevel"];
+                    if (pipelineLevel != null)
+                    {
+                        pipelineLevel.Text = report.PipelineLevel;
+                    }
+                    Bookmark pipelineLength = doc.Range.Bookmarks["PipelineLength"];
+                    if (pipelineLength != null)
+                    {
+                        pipelineLength.Text = report.PipelineLength;
+                    }
+                    Bookmark designUnit = doc.Range.Bookmarks["DesignUnit"];
+                    if (designUnit != null)
+                    {
+                        designUnit.Text = report.DesignUnit;
+                    }
+                    Bookmark losslessTestingAgency = doc.Range.Bookmarks["LosslessTestingAgency"];
+                    if (losslessTestingAgency != null)
+                    {
+                        losslessTestingAgency.Text = report.LosslessTestingAgency;
+                    }
+                    Bookmark supervisoryAndInspectionAgency = doc.Range.Bookmarks["SupervisoryAndInspectionAgency"];
+                    if (supervisoryAndInspectionAgency != null)
+                    {
+                        if (report.SupervisoryAndInspectionAgency != null)
+                        {
+                            supervisoryAndInspectionAgency.Text = report.SupervisoryAndInspectionAgency;
+                        }
+                    }
+                    Bookmark constructionUnit = doc.Range.Bookmarks["ConstructionUnit"];
+                    if (constructionUnit != null)
+                    {
+                        constructionUnit.Text = report.ConstructionUnit;
+                    }
+                    Bookmark remark = doc.Range.Bookmarks["Remark"];
+                    if (remark != null)
+                    {
+                        remark.Text = report.Remark;
+                    }
+                    Bookmark specialEquipmentProductionLicenseCode = doc.Range.Bookmarks["SpecialEquipmentProductionLicenseCode"];
+                    if (specialEquipmentProductionLicenseCode != null)
+                    {
+                        specialEquipmentProductionLicenseCode.Text = report.SpecialEquipmentProductionLicenseCode;
+                    }
+                    doc.Save(newUrl);
+
+                    string fileName = Path.GetFileName(newUrl);
+                    FileInfo info = new FileInfo(newUrl);
+                    long fileSize = info.Length;
+                    Response.Clear();
+                    Response.ContentType = "application/x-zip-compressed";
+                    Response.AddHeader("Content-Disposition", "attachment;filename=" + System.Web.HttpUtility.UrlEncode(fileName, System.Text.Encoding.UTF8));
+                    Response.AddHeader("Content-Length", fileSize.ToString());
+                    Response.TransmitFile(newUrl, 0, fileSize);
+                    Response.Flush();
+                    Response.Close();
+                    File.Delete(newUrl);
+                }
+                else
+                {
+                    Alert.ShowInTop("请先保存数据！", MessageBoxIcon.Warning);
+                    return;
+                }
+            }
+            else
+            {
+                Alert.ShowInTop("请选择项目！", MessageBoxIcon.Warning);
+                return;
+            }
+        }
+        #endregion
     }
 }

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationQualityCertificate.aspx.designer.cs

@@ -122,6 +122,15 @@ namespace FineUIPro.Web.JGZL
         /// </remarks>
         protected global::FineUIPro.Button btnPrint;
 
+        /// <summary>
+        /// btnOut 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnOut;
+
         /// <summary>
         /// SimpleForm1 控件。
         /// </summary>

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationSummary.aspx

@@ -44,6 +44,9 @@
                                 <f:Button ID="btnSave" Text="保存" ToolTip="保存" Icon="SystemSave" runat="server" OnClick="btnSave_Click"></f:Button>
                                 <f:Button ID="btnPrint" Text="工业管道安装汇总表打印" Icon="Printer" runat="server" OnClick="btnPrint_Click">
                                 </f:Button>
+                                <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="导出" ToolTip="导出Word" Icon="FolderUp"
+                                    EnableAjax="false" DisableControlBeforePostBack="false">
+                                </f:Button>
                             </Items>
                         </f:Toolbar>
                     </Toolbars>
@@ -60,7 +63,7 @@
                                         <f:DropDownList runat="server" ID="drpCertificateCode" LabelAlign="Right" Label="质量证明书编号" LabelWidth="120px" AutoPostBack="true" OnSelectedIndexChanged="drpCertificateCode_SelectedIndexChanged" ShowRedStar="true" EnableEdit="true" Width="380px"></f:DropDownList>
                                         <f:TextBox ID="txtDeliveryUnit" runat="server" Label="交工单元名称" LabelAlign="Right" Readonly="true"></f:TextBox>
                                         <f:TextBox ID="txtDeliveryUnitCode" runat="server" Label="交工单元编号" LabelAlign="Right" Readonly="true"></f:TextBox>
-                                        <f:ToolbarFill ID="ToolbarFill2" runat="server"></f:ToolbarFill> 
+                                        <f:ToolbarFill ID="ToolbarFill2" runat="server"></f:ToolbarFill>
                                     </Items>
                                 </f:Toolbar>
                             </Toolbars>
@@ -224,7 +227,7 @@
         <f:Window ID="WindowPrint" Title="打印工业管道安装汇总表" Hidden="true" EnableIFrame="true" EnableMaximize="false"
             Target="Top" EnableResize="true" runat="server" IsModal="true" Width="1024px"
             Height="600px">
-        </f:Window>  
+        </f:Window>
     </form>
 </body>
 </html>

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationSummary.aspx.cs

@@ -1,17 +1,20 @@
-using BLL;
+using Aspose.Words;
+using Aspose.Words.Tables;
+using BLL;
+using Model;
+using Newtonsoft.Json.Linq;
+using NPOI.SS.Formula.Functions;
+using Org.BouncyCastle.Asn1.IsisMtt;
 using System;
 using System.Collections.Generic;
-using System.Data.SqlClient;
 using System.Data;
+using System.Data.SqlClient;
+using System.IO;
 using System.Linq;
 using System.Web;
+using System.Web.Services;
 using System.Web.UI;
 using System.Web.UI.WebControls;
-using System.IO;
-using Newtonsoft.Json.Linq;
-using System.Web.Services;
-using Org.BouncyCastle.Asn1.IsisMtt;
-using Model;
 using static System.Windows.Forms.VisualStyles.VisualStyleElement;
 
 namespace FineUIPro.Web.JGZL
@@ -147,7 +150,7 @@ namespace FineUIPro.Web.JGZL
                     newSummary.VoltageResistantTestMedium = "水";//耐压试验介质
                     newSummary.LeakageTestMedium = "空气";//泄漏试验介质
                     newSummary.CleaningMethod = "压缩空气吹扫";//吹扫、清洗方法
-                    newSummary.VoltageResistantTestPressure = item.ISO_TestPress.Value.ToString(("0.##")) + "MPa";//耐压试验压力
+                    newSummary.VoltageResistantTestPressure = item.ISO_TestPress.HasValue ? item.ISO_TestPress.Value.ToString(("0.##")) + "MPa" : "";//耐压试验压力
                     newSummary.LeakageTestPressure = item.LeakageTest + "MPa";//泄漏试验压力
                     newSummary.CorrosionControlMethod = item.ISO_Paint;//腐蚀控制方式
                     newSummary.VoltageResistantTestMethod = "水压试验";//耐压试验方法
@@ -612,5 +615,236 @@ namespace FineUIPro.Web.JGZL
             }
         }
         #endregion
+
+        #region 导出按钮
+        /// 导出按钮
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        protected void btnOut_Click(object sender, EventArgs e)
+        {
+            string rootPath = Server.MapPath("~/");
+            string initTemplatePath = string.Empty;
+            string uploadfilepath = string.Empty;
+            string newUrl = string.Empty;
+            string filePath = string.Empty;
+
+            //每页显示的固定数据行数
+            int rowsPerPage = 4;
+
+            string projectId = this.tvControlItem.SelectedNodeID;
+            if (!string.IsNullOrEmpty(projectId))
+            {
+                string strSql = @"SELECT * from JGZL_IndustrialPipelineInstallationSummary where ProjectId = @ProjectId ";
+                List<SqlParameter> listStr = new List<SqlParameter>();
+                listStr.Add(new SqlParameter("@ProjectId", projectId));
+                if (!string.IsNullOrEmpty(this.txtIsoNoS.Text))
+                {
+                    strSql += " And PipelineCode like @pipeLineCode";
+                    listStr.Add(new SqlParameter("@pipeLineCode", "%" + this.txtIsoNoS.Text + "%"));
+                }
+                SqlParameter[] parameter = listStr.ToArray();
+                DataTable tb = SQLHelper.GetDataTableRunText(strSql, parameter);
+                if (tb.Rows.Count > 0)
+                {
+                    initTemplatePath = Const.JGZL_IndustrialPipelineInstallationSummaryUrl;
+                    uploadfilepath = rootPath + initTemplatePath;
+
+                    newUrl = uploadfilepath.Replace("工业管道安装汇总表导出模板", "工业管道安装汇总表");
+                    if (File.Exists(newUrl))
+                    {
+                        File.Delete(newUrl);
+                    }
+                    File.Copy(uploadfilepath, newUrl);
+                    //更新书签内容
+                    Document doc = new Aspose.Words.Document(newUrl);
+                    DocumentBuilder builder = new DocumentBuilder(doc);
+
+                    Aspose.Words.Tables.Table table = (Aspose.Words.Tables.Table)doc.GetChild(NodeType.Table, 0, true);
+
+                    string certificateCode = string.Empty;
+                    string deliveryUnit = string.Empty;
+                    string deliveryUnitCode = string.Empty;
+                    string certificateId = tb.Rows[0]["CertificateId"].ToString();
+                    var certificate = BLL.IndustrialPipelineInstallationQualityCertificateService.GetIndustrialPipelineInstallationQualityCertificateById(certificateId);
+                    if (certificate != null)
+                    {
+                        certificateCode = certificate.CertificateCode;
+                        deliveryUnit = certificate.DeliveryUnit;
+                        deliveryUnitCode = certificate.DeliveryUnitCode;
+                    }
+
+                    Bookmark bookmark1 = doc.Range.Bookmarks["certificateCode"];
+                    if (bookmark1 != null)
+                    {
+                        bookmark1.Text = certificateCode;
+                    }
+                    Bookmark bookmark2 = doc.Range.Bookmarks["deliveryUnit"];
+                    if (bookmark2 != null)
+                    {
+                        bookmark2.Text = deliveryUnit;
+                    }
+                    Bookmark bookmark3 = doc.Range.Bookmarks["deliveryUnitCode"];
+                    if (bookmark3 != null)
+                    {
+                        bookmark3.Text = deliveryUnitCode;
+                    }
+
+                    // 设置表头行重复显示
+                    table.Rows[0].RowFormat.HeadingFormat = true;
+                    table.Rows[1].RowFormat.HeadingFormat = true;
+                    table.Rows[2].RowFormat.HeadingFormat = true;
+
+                    // 先记录页尾行，并从表格中移除
+                    //Row footerRow = table.Rows[table.Rows.Count - 1];
+                    //table.Rows.RemoveAt(table.Rows.Count - 1);
+
+                    for (int i = 0; i < tb.Rows.Count; i++)
+                    {
+                        //创建行
+                        Aspose.Words.Tables.Row row = new Aspose.Words.Tables.Row(doc);                       
+                        row.Cells.Add(CreateCell(tb.Rows[i]["PipelineCode"].ToString(), doc, 32.3, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["PipelineLevel"].ToString(), doc, 33.7, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["PipelineStartPoint"].ToString(), doc, 31.75, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["PipelineEndPoint"].ToString(), doc, 32, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["DesignPressure"].ToString(), doc, 40, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["DesignTemperature"].ToString(), doc, 36, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["Medium"].ToString(), doc, 30.6, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["Material"].ToString(), doc, 31.47, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["Specifications"].ToString(), doc, 32.3, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["Length"].ToString(), doc, 30, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["LayingMethod"].ToString(), doc, 31.49, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["WeldsNum"].ToString(), doc, 30, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["LosslessRatio"].ToString(), doc, 39, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["VoltageResistantTestMethod"].ToString(), doc, 32.3, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["VoltageResistantTestMedium"].ToString(), doc, 28.6, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["VoltageResistantTestPressure"].ToString(), doc, 38, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["LeakageTestMedium"].ToString(), doc, 37.4, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["LeakageTestPressure"].ToString(), doc, 41.67, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["CleaningMethod"].ToString(), doc, 34.3, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["CorrosionControlMethod"].ToString(), doc, 31.2, "", ""));
+                        row.Cells.Add(CreateCell(tb.Rows[i]["InsulationMethod"].ToString(), doc, 43.9, "", ""));
+
+                        table.Rows.Insert(i + 3, row);
+                    }
+                    // 计算并插入空白行，填满整页
+                    // 计算总数据行数
+                    int totalDataRows = tb.Rows.Count;
+                    // 计算需要补充的空白行数量
+                    int remainder = totalDataRows % rowsPerPage;
+                    int needBlankRows = remainder == 0 ? 0 : rowsPerPage - remainder;
+
+                    // 插入空白行（和数据行格式保持一致，仅内容为空）
+                    for (int i = 0; i < needBlankRows - 1; i++)
+                    {
+                        Aspose.Words.Tables.Row blankRow = new Aspose.Words.Tables.Row(doc);
+                        // 空白行的单元格宽度和数据行保持一致
+                        blankRow.Cells.Add(CreateCell("", doc, 32.3, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 33.7, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 31.75, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 32, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 40, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 36, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 30.6, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 31.47, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 32.3, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 30, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 31.49, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 30, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 39, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 32.3, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 28.6, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 38, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 37.4, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 41.67, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 34.3, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 31.2, "", ""));
+                        blankRow.Cells.Add(CreateCell("", doc, 43.9, "", ""));
+
+                        // 插入到表格最后一行
+                        table.Rows.Add(blankRow);
+                    }
+                    //把页尾行重新加回表格最后
+                    //table.Rows.Add(footerRow);
+
+                    //自动设置表格样式
+                    table.AutoFit(AutoFitBehavior.FixedColumnWidths);
+                    table.Alignment = TableAlignment.Center;
+
+                    doc.Save(newUrl);
+
+                    string fileName = Path.GetFileName(newUrl);
+                    FileInfo info = new FileInfo(newUrl);
+                    long fileSize = info.Length;
+                    Response.Clear();
+                    Response.ContentType = "application/x-zip-compressed";
+                    Response.AddHeader("Content-Disposition", "attachment;filename=" + System.Web.HttpUtility.UrlEncode(fileName, System.Text.Encoding.UTF8));
+                    Response.AddHeader("Content-Length", fileSize.ToString());
+                    Response.TransmitFile(newUrl, 0, fileSize);
+                    Response.Flush();
+                    Response.Close();
+                    File.Delete(newUrl);
+                }
+                else
+                {
+                    Alert.ShowInTop("没有要导出的数据！", MessageBoxIcon.Warning);
+                    return;
+                }
+            }
+            else
+            {
+                Alert.ShowInTop("请选择项目！", MessageBoxIcon.Warning);
+                return;
+            }
+        }
+
+        public static Cell CreateCell(String value, Document doc, double cellWidth, string cellMerge = "", string CenterPage = "", string cellUnitLeft = "")
+        {
+            Cell cell = new Cell(doc);
+            Paragraph p = new Paragraph(doc);
+            if (!string.IsNullOrEmpty(cellMerge))
+            {
+                if (cellMerge == "0")
+                {
+                    cell.CellFormat.VerticalMerge = Aspose.Words.Tables.CellMerge.First;//竖直方向合并的第一个单元格
+                }
+                else
+                {
+                    cell.CellFormat.VerticalMerge = Aspose.Words.Tables.CellMerge.Previous;//竖直方向合并的第一个单元格
+                }
+
+            }
+            else
+            {
+                cell.CellFormat.VerticalMerge = Aspose.Words.Tables.CellMerge.None;
+            }
+            if (!string.IsNullOrEmpty(CenterPage))
+            {
+                //序号
+                value = "  " + value;
+            }
+            if (!string.IsNullOrEmpty(cellUnitLeft))
+            {
+                p.ParagraphFormat.Alignment = ParagraphAlignment.Left;//表格中字体居左
+            }
+            else
+            {
+                p.ParagraphFormat.Alignment = ParagraphAlignment.Center;//表格中字体居中 
+            }
+
+
+            p.AppendChild(new Run(doc, value));
+
+            cell.CellFormat.Width = cellWidth;
+
+            cell.CellFormat.VerticalAlignment = Aspose.Words.Tables.CellVerticalAlignment.Center;
+
+            cell.CellFormat.Borders.LineWidth = 0.75;
+
+            cell.AppendChild(p);
+            return cell;
+        }
+
+        #endregion
     }
 }

HJGL_DS/FineUIPro.Web/JGZL/IndustrialPipelineInstallationSummary.aspx.designer.cs

@@ -140,6 +140,15 @@ namespace FineUIPro.Web.JGZL
         /// </remarks>
         protected global::FineUIPro.Button btnPrint;
 
+        /// <summary>
+        /// btnOut 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnOut;
+
         /// <summary>
         /// Grid1 控件。
         /// </summary>

HJGL_DS/FineUIPro.Web/JGZL/PressureTestOfPipelineSystemConfirmationRecord.aspx

@@ -81,7 +81,11 @@
                                 <f:RenderField HeaderText="检查结果" ColumnID="CheckItem3" DataField="CheckItem3" SortField="CheckItem3"
                                     FieldType="String" HeaderTextAlign="Center" TextAlign="Left" Width="300px">
                                     <Editor>
-                                        <f:TextBox ID="txtCheckItem3" runat="server"></f:TextBox>
+                                        <f:DropDownList ID="drpCheckItem3" runat="server">
+                                            <f:ListItem Value="合格" Text="合格" Selected="true" />
+                                            <f:ListItem Value="不合格" Text="不合格" />
+                                            <f:ListItem Value="/" Text="/" />
+                                        </f:DropDownList>
                                     </Editor>
                                 </f:RenderField>
                                 <f:RenderField HeaderText="主键" ColumnID="RecordId" DataField="RecordId" SortField="RecordId"

HJGL_DS/FineUIPro.Web/JGZL/PressureTestOfPipelineSystemConfirmationRecord.aspx.cs

@@ -75,9 +75,23 @@ namespace FineUIPro.Web.JGZL
                 var record = BLL.PressureTestOfPipelineSystemConfirmationRecordService.GetPressureTestOfPipelineSystemConfirmationRecordByProjectId(this.drpProjectId.SelectedValue);
                 if (record != null)
                 {
-                    this.txtSystemCode.Text = record.SystemCode;
+                    if (!string.IsNullOrEmpty(record.SystemCode))
-                    this.txtSystemName.Text = record.SystemName;
+                    {
-                    this.txtRemark.Text = record.Remark;
+                        this.txtSystemCode.Text = record.SystemCode;
+                    }
+                    else
+                    {
+                        this.txtSystemCode.Text = "01";
+                    }
+                    if (!string.IsNullOrEmpty(record.SystemName))
+                    {
+                        this.txtSystemName.Text = record.SystemName;
+                    }
+                    else
+                    {
+                        this.txtSystemName.Text = "材质";
+                    }
+                        this.txtRemark.Text = record.Remark;
                     BindGrid();
                 }
                 else
@@ -89,8 +103,8 @@ namespace FineUIPro.Web.JGZL
 
         private void InitData()
         {
-            this.txtSystemCode.Text = string.Empty;
+            this.txtSystemCode.Text = "01";
-            this.txtSystemName.Text = string.Empty;
+            this.txtSystemName.Text = "材质";
             this.txtRemark.Text = string.Empty;
             itemLists.Clear();
             this.ProjectId = this.tvControlItem.SelectedNodeID;
@@ -99,6 +113,7 @@ namespace FineUIPro.Web.JGZL
             newItem.ProjectId = this.ProjectId;
             newItem.CheckItem1 = "01";
             newItem.CheckItem2 = "管道安装符合设计文件和规范要求";
+            newItem.CheckItem3 = "合格";
             itemLists.Add(newItem);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem2 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -106,6 +121,7 @@ namespace FineUIPro.Web.JGZL
             newItem2.ProjectId = this.ProjectId;
             newItem2.CheckItem1 = "02";
             newItem2.CheckItem2 = "管道组成件复验合格";
+            newItem2.CheckItem3 = "合格";
             itemLists.Add(newItem2);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem3 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -113,6 +129,7 @@ namespace FineUIPro.Web.JGZL
             newItem3.ProjectId = this.ProjectId;
             newItem3.CheckItem1 = "03";
             newItem3.CheckItem2 = "焊接工作记录齐全";
+            newItem3.CheckItem3 = "合格";
             itemLists.Add(newItem3);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem4 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -120,6 +137,7 @@ namespace FineUIPro.Web.JGZL
             newItem4.ProjectId = this.ProjectId;
             newItem4.CheckItem1 = "04";
             newItem4.CheckItem2 = "无损检测结果符合设计文件和规范要求";
+            newItem4.CheckItem3 = "合格";
             itemLists.Add(newItem4);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem5 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -127,6 +145,7 @@ namespace FineUIPro.Web.JGZL
             newItem5.ProjectId = this.ProjectId;
             newItem5.CheckItem1 = "05";
             newItem5.CheckItem2 = "热处理结果符合设计文件和规范要求";
+            newItem5.CheckItem3 = "合格";
             itemLists.Add(newItem5);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem6 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -134,6 +153,7 @@ namespace FineUIPro.Web.JGZL
             newItem6.ProjectId = this.ProjectId;
             newItem6.CheckItem1 = "06";
             newItem6.CheckItem2 = "支、吊架安装正确";
+            newItem6.CheckItem3 = "合格";
             itemLists.Add(newItem6);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem7 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -141,6 +161,7 @@ namespace FineUIPro.Web.JGZL
             newItem7.ProjectId = this.ProjectId;
             newItem7.CheckItem1 = "07";
             newItem7.CheckItem2 = "合金钢管道材质标记清楚";
+            newItem7.CheckItem3 = "合格";
             itemLists.Add(newItem7);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem8 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -148,6 +169,7 @@ namespace FineUIPro.Web.JGZL
             newItem8.ProjectId = this.ProjectId;
             newItem8.CheckItem1 = "08";
             newItem8.CheckItem2 = "不参与管道系统试验的安全附件、仪表已按规定拆除或隔离，参与试压的系统内的阀门全部开启";
+            newItem8.CheckItem3 = "合格";
             itemLists.Add(newItem8);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem9 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -155,6 +177,7 @@ namespace FineUIPro.Web.JGZL
             newItem9.ProjectId = this.ProjectId;
             newItem9.CheckItem1 = "09";
             newItem9.CheckItem2 = "临时加固措施、盲板位置与标识符合施工方案要求";
+            newItem9.CheckItem3 = "合格";
             itemLists.Add(newItem9);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem10 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -162,6 +185,7 @@ namespace FineUIPro.Web.JGZL
             newItem10.ProjectId = this.ProjectId;
             newItem10.CheckItem1 = "10";
             newItem10.CheckItem2 = "焊接接头及需要检验的部位未被覆盖";
+            newItem10.CheckItem3 = "合格";
             itemLists.Add(newItem10);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem11 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -169,6 +193,7 @@ namespace FineUIPro.Web.JGZL
             newItem11.ProjectId = this.ProjectId;
             newItem11.CheckItem1 = "11";
             newItem11.CheckItem2 = "试压用压力表量程、精度等级、检定状态符合规范要求";
+            newItem11.CheckItem3 = "合格";
             itemLists.Add(newItem11);
 
             Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord newItem12 = new Model.JGZL_PressureTestOfPipelineSystemConfirmationRecord();
@@ -176,6 +201,7 @@ namespace FineUIPro.Web.JGZL
             newItem12.ProjectId = this.ProjectId;
             newItem12.CheckItem1 = "12";
             newItem12.CheckItem2 = "不锈钢管道试验用水符合规范要求、附水质分析报告";
+            newItem12.CheckItem3 = "合格";
             itemLists.Add(newItem12);
 
             this.Grid1.DataSource = itemLists;

HJGL_DS/FineUIPro.Web/JGZL/PressureTestOfPipelineSystemConfirmationRecord.aspx.designer.cs

@@ -195,13 +195,13 @@ namespace FineUIPro.Web.JGZL
         protected global::FineUIPro.ToolbarFill ToolbarFill2;
 
         /// <summary>
-        /// txtCheckItem3 控件。
+        /// drpCheckItem3 控件。
         /// </summary>
         /// <remarks>
         /// 自动生成的字段。
         /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
         /// </remarks>
-        protected global::FineUIPro.TextBox txtCheckItem3;
+        protected global::FineUIPro.DropDownList drpCheckItem3;
 
         /// <summary>
         /// WindowPrint 控件。