ALTER PROC [dbo].[HJGL_sp_rpt_iso_analyze]
          @unitNo  VARCHAR(400) = NULL,
          @isono VARCHAR(100) = NULL,
          @steel varchar(50) = NULL,
          @projectId NVARCHAR(50) = NULL,
          @StartDate datetime =null,
          @EndDate datetime =null
AS
/*焊接工作量统计 佘春生修改于2020.03.06*/
SELECT iso.ProjectId,iso.ISO_IsoNo,iso.PressureTestPackageNo,Unit.UnitCode AS bsu_unitcode, --单位代码
	   Unit.UnitName AS bsu_unitname, --单位名称
	   Project.ProjectCode as projectCode, --施工号
	   Project.ProjectName as projectName, --项目名称
	   'Φ'+cast(cast(ISO_Dia as FLOAT) as nvarchar(50))+'×'+cast(cast(ISO_Sch as FLOAT) as nvarchar(50)) as IsoDesc,   --管线主规格
	  v.ISO_ID,v.total_jot,v.total_din,
       ISNULL(v1.finished_total_jot,0) AS finished_total_jot,
       ISNULL(v1.finished_total_din,0) AS finished_total_din,v1.maxdate, 
       ISNULL(v1.total_film,0) AS total_film,
       ISNULL(v1.pass_film,0) AS pass_film, 
       CAST(CASE ISNULL(v1.total_film ,0) WHEN 0 THEN 0
		ELSE 1.0*ISNULL(v1.pass_film,0) / (1.0 * v1.total_film) END AS DECIMAL(19,3))
		AS passrate, --点口合格率
       ISNULL(v2.point_jot,0) AS point_jot,
       ISNULL(v2.point_total_film,0) AS point_total_film,
       ISNULL(v2.point_pass_film,0) AS point_pass_film, 
       CAST(CASE ISNULL(v2.point_total_film ,0) WHEN 0 THEN 0
		ELSE 1.0*ISNULL(v2.point_pass_film,0) / (1.0 * v2.point_total_film) END AS DECIMAL(19,3))
		AS point_passrate, --点口合格率
		
       ISNULL(v3.ext_jot,0) AS ext_jot,
       ISNULL(v3.ext_total_film,0) AS ext_total_film,
       ISNULL(v3.ext_pass_film,0) AS ext_pass_film,
       CAST(CASE ISNULL(v3.ext_total_film ,0) WHEN 0 THEN 0
		ELSE 1.0*ISNULL(v3.ext_pass_film,0) / (1.0 * v3.ext_total_film) END AS DECIMAL(19,3))
		AS point_passrate, --扩透合格率
		(ISNULL(v2.point_jot,0)+ISNULL(v3.ext_jot,0)) AS check_total_jot,
		ISNULL(v4.total_repairjot,0) AS total_repairjot,
		ISNULL(v5.trust_total_jot,0) AS trust_total_jot,
		CAST(CASE ISNULL(v.total_jot,0) WHEN 0 THEN 0
		ELSE 1.0*ISNULL(v2.point_jot,0) / (1.0 * v.total_jot) END AS DECIMAL(19,3))
		AS  trustrate,  --委托比例	
	    CAST(CASE ISNULL(v.total_jot,0) WHEN 0 THEN 0
		ELSE 1.0*(ISNULL(v3.ext_jot,0) + ISNULL(v2.point_jot,0)) / (1.0 * v.total_jot) 
		END AS DECIMAL(19,3))
		AS  checkrate,  --已探比例
		ISNULL(v6.total_fjot,0) as total_fjot,--安装焊口数
		ISNULL(v7.total_sjot,0) as total_sjot --预制焊口数
FROM 
   (SELECT ISO_ID, COUNT(JOT_ID) AS total_jot,SUM(ISNULL(JOT_Size,0)) AS total_din
      FROM dbo.HJGL_PW_JointInfo
      GROUP BY ISO_ID) v
   LEFT JOIN  
   (SELECT ISO_ID, COUNT(JOT_ID) AS finished_total_jot,SUM(ISNULL(JOT_Size,0)) AS finished_total_din, 
            max(weldreport.JOT_WeldDate) AS maxdate, SUM(ISNULL(jot.RT_FilmNum,0)) AS total_film,
            SUM(ISNULL(jot.RT_FilmNum,0)-ISNULL(jot.RT1_RepairFilmNum,0)) AS pass_film
      FROM dbo.HJGL_PW_JointInfo jot
           LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE (weldreport.JOT_WeldDate>=@StartDate or @StartDate is null) and (weldreport.JOT_WeldDate<=@EndDate or @EndDate is null) 
		    AND jot.DReportID is not null
      GROUP BY ISO_ID) v1 ON v1.ISO_ID=v.ISO_ID 
   LEFT JOIN  
   (SELECT ISO_ID, COUNT(jot.JOT_ID) AS point_jot,SUM(ISNULL(jot.RT_FilmNum,0)) AS point_total_film,
           SUM(ISNULL(jot.RT_FilmNum,0)-ISNULL(jot.RT1_RepairFilmNum,0)) AS point_pass_film
      FROM dbo.HJGL_PW_JointInfo jot
           LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE (weldreport.JOT_WeldDate>=@StartDate or @StartDate is null) and (weldreport.JOT_WeldDate<=@EndDate or @EndDate is null) 
		    AND jot.DReportID is not NULL AND jot.PointType='点口' or ((select top 1 CH_TrustItemID from HJGL_CH_TrustItem ti where ti.JOT_ID=jot.JOT_ID) is not null and jot.PointType is null)
      GROUP BY ISO_ID) v2 ON v2.ISO_ID=v.ISO_ID 
   LEFT JOIN  
   (SELECT ISO_ID, COUNT(jot.JOT_ID) AS ext_jot,SUM(ISNULL(jot.RT_FilmNum,0)) AS ext_total_film,
            SUM(ISNULL(jot.RT_FilmNum,0)-ISNULL(jot.RT1_RepairFilmNum,0)) AS ext_pass_film
      FROM dbo.HJGL_PW_JointInfo jot
           LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE (weldreport.JOT_WeldDate>=@StartDate or @StartDate is null) and (weldreport.JOT_WeldDate<=@EndDate or @EndDate is null) 
		    AND jot.DReportID is not NULL AND jot.PointType='扩透'
      GROUP BY ISO_ID) v3 ON v3.ISO_ID=v.ISO_ID   
  LEFT JOIN  
   (SELECT jot.ISO_ID, COUNT(distinct trust.JOT_ID) AS trust_total_jot   --trust.CH_TrustItemID
      FROM dbo.HJGL_CH_TrustItem trust
           LEFT join dbo.HJGL_PW_JointInfo AS jot on jot.JOT_ID=trust.JOT_ID
		   LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE (weldreport.JOT_WeldDate>=@StartDate or @StartDate is null) and (weldreport.JOT_WeldDate<=@EndDate or @EndDate is null) 
		    AND jot.DReportID is not NULL 
      GROUP BY jot.ISO_ID) v5 ON v5.ISO_ID=v.ISO_ID 
  LEFT JOIN  
   (SELECT ISO_ID,COUNT(DISTINCT(jot.JOT_ID)) AS total_repairjot
      FROM dbo.HJGL_PW_JointInfo jot
           LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE (weldreport.JOT_WeldDate>=@StartDate or @StartDate is null) and (weldreport.JOT_WeldDate<=@EndDate or @EndDate is null) 
		    AND jot.DReportID is not NULL 
		    AND(jot.RT1_RepairFilmNum IS NOT NULL OR jot.PTIsRepair1=1 OR jot.MTIsRepair1=1 OR jot.UTIsRepair1=1)
      GROUP BY ISO_ID) v4 ON v4.ISO_ID=v.ISO_ID 
--安装焊口	  
  LEFT JOIN  
   (SELECT ISO_ID,COUNT(jot.JOT_ID) AS total_fjot
      FROM dbo.HJGL_PW_JointInfo jot
           LEFT join HJGL_BO_WeldReportMain AS weldreport on weldreport.DReportID=jot.DReportID
      WHERE jot.WLO_Code='F'
      GROUP BY ISO_ID) v6 ON v6.ISO_ID=v.ISO_ID 
--预制焊口	  	  
  LEFT JOIN  
   (SELECT ISO_ID,COUNT(jot.JOT_ID) AS total_sjot
      FROM dbo.HJGL_PW_JointInfo jot
      WHERE jot.WLO_Code='S'
      GROUP BY ISO_ID) v7 ON v7.ISO_ID=v.ISO_ID       
      
   LEFT JOIN dbo.HJGL_PW_IsoInfo iso ON iso.ISO_ID = v.ISO_ID  
   LEFT JOIN Base_Unit AS Unit ON Unit.UnitId = iso.BSU_ID   
   LEFT JOIN Base_Project AS Project ON Project.ProjectId = iso.ProjectId
   WHERE (iso.ProjectId = @projectId OR @projectId IS NULL)
		  AND (iso.BSU_ID=@unitno OR @unitno IS NULL) 
		  AND	(iso.STE_ID=@steel OR @steel IS NULL)  
		  AND	(iso.ISO_IsoNo = @isono OR  @isono IS NULL)






GO



ALTER PROCEDURE [dbo].[sp_rpt_WelderQualified]
(
   @projectId NVARCHAR(50),
   @WED_Name nvarchar(50) = null
)
AS
/***********交工资料-合格焊工登记表*************/
SELECT (ROW_NUMBER() OVER(ORDER BY pw.ProjectWelderId)) AS Number,
pw.ProjectWelderId,
w.WED_Code,
w.WED_Name,
w.WED_WorkCode as CertificateNo,
convert(varchar(10),wqp.LimitDate,111) as LimitDate,
 STRING_AGG(wqp.QualifiedProjectCode, '和') as QualifiedProjectCode
FROM Project_Welder pw
LEFT JOIN HJGL_BS_Welder w ON w.WED_ID = pw.WED_ID
left join HJGL_BS_WelderQualifiedProject wqp on wqp.WED_ID = pw.WED_ID
where pw.ProjectId=@projectId 
and (w.WED_Name like @WED_Name or @WED_Name is null)
and wqp.LimitDate IS NOT NULL AND wqp.LimitDate> = GETDATE()
GROUP BY pw.ProjectWelderId,w.WED_Code,w.WED_Name,w.WED_WorkCode,wqp.LimitDate
order by w.WED_Code,wqp.LimitDate
GO