SGGL_SHJ/SGGL/BLL/HJGL/TestPackage/TestPackageEditService.cs

using Model;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web.UI.WebControls;

namespace BLL
{
    public partial class TestPackageEditService
    {
        public enum State : int
        {
            试压前条件未确认 = 0,
            试压前条件已确认 = 1,
            尾项检查待整改 = 2,
            尾项检查已整改 = 3,
            试压包已完成 = 4,
        }
        public static Dictionary<int, string> StateMap = new Dictionary<int, string>()
        {
            { 0, State.试压前条件未确认.ToString()},
            { 1, State.试压前条件已确认.ToString()},
            { 2, State.尾项检查待整改.ToString()},
            { 3, State.尾项检查已整改.ToString()},
            { 4, State.试压包已完成.ToString()},
        };
        /// <summary>
        /// 根据试压Id获取用于试压信息
        /// </summary>
        /// <param name="jot_id"></param>
        /// <returns></returns>
        public static Model.PTP_TestPackage GetTestPackageByID(string PTP_ID)
        {
            var view = Funs.DB.PTP_TestPackage.FirstOrDefault(e => e.PTP_ID == PTP_ID);
            return view;
        }

        /// <summary>
        /// 根据试压Id获取用于管线明细信息
        /// </summary>
        /// <param name="jot_id"></param>
        /// <returns></returns>
        public static List<Model.HJGL_Pipeline> GetPipeLineListByPTP_ID(string PTP_ID)
        {
            Model.SGGLDB db = Funs.DB;
            var view = from x in db.HJGL_Pipeline
                       join y in db.PTP_PipelineList on x.PipelineId equals y.PipelineId
                       where y.PTP_ID == PTP_ID
                       select x;
            return view.ToList();
        }

        /// <summary>
        /// 增加试压信息
        /// </summary>
        /// <param name="testPackage">试压实体</param>
        public static void AddTestPackage(Model.PTP_TestPackage testPackage)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_TestPackage newTestPackage = new Model.PTP_TestPackage();
            newTestPackage.PTP_ID = testPackage.PTP_ID;
            newTestPackage.UnitWorkId = testPackage.UnitWorkId;
            newTestPackage.UnitId = testPackage.UnitId;
            newTestPackage.TestPackageNo = testPackage.TestPackageNo;
            newTestPackage.TestPackageName = testPackage.TestPackageName;
            newTestPackage.Finisher = testPackage.Finisher;
            newTestPackage.FinishDate = testPackage.FinishDate;
            newTestPackage.Tabler = testPackage.Tabler;
            newTestPackage.TableDate = testPackage.TableDate;
            newTestPackage.Auditer = testPackage.Auditer;
            newTestPackage.AduditDate = testPackage.AduditDate;
            newTestPackage.Remark = testPackage.Remark;
            newTestPackage.ProjectId = testPackage.ProjectId;
            newTestPackage.AdjustTestPressure = testPackage.AdjustTestPressure;
            newTestPackage.Check1 = testPackage.Check1;
            newTestPackage.Check2 = testPackage.Check2;
            newTestPackage.Check3 = testPackage.Check3;
            newTestPackage.Check4 = testPackage.Check4;
            newTestPackage.Check5 = testPackage.Check5;
            newTestPackage.Check6 = testPackage.Check6;
            newTestPackage.Check7 = testPackage.Check7;
            newTestPackage.Check8 = testPackage.Check8;
            newTestPackage.Check9 = testPackage.Check9;
            newTestPackage.Check10 = testPackage.Check10;
            newTestPackage.Check11 = testPackage.Check11;
            newTestPackage.Check12 = testPackage.Check12;
            db.PTP_TestPackage.InsertOnSubmit(newTestPackage);
            db.SubmitChanges();
        }

        /// <summary>
        /// 修改试压信息
        /// </summary>
        /// <param name="weldReport">试压实体</param>
        public static void UpdateTestPackage(Model.PTP_TestPackage testPackage)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_TestPackage newTestPackage = db.PTP_TestPackage.First(e => e.PTP_ID == testPackage.PTP_ID);
            newTestPackage.UnitId = testPackage.UnitId;
            newTestPackage.UnitWorkId = testPackage.UnitWorkId;
            newTestPackage.TestPackageNo = testPackage.TestPackageNo;
            newTestPackage.TestPackageName = testPackage.TestPackageName;
            newTestPackage.Finisher = testPackage.Finisher;
            newTestPackage.FinishDate = testPackage.FinishDate;
            newTestPackage.Tabler = testPackage.Tabler;
            newTestPackage.TableDate = testPackage.TableDate;
            newTestPackage.Auditer = testPackage.Auditer;
            newTestPackage.AduditDate = testPackage.AduditDate;
            newTestPackage.Remark = testPackage.Remark;
            newTestPackage.AdjustTestPressure = testPackage.AdjustTestPressure;
            newTestPackage.ProjectId = testPackage.ProjectId;
            newTestPackage.Check1 = testPackage.Check1;
            newTestPackage.Check2 = testPackage.Check2;
            newTestPackage.Check3 = testPackage.Check3;
            newTestPackage.Check4 = testPackage.Check4;
            newTestPackage.Check5 = testPackage.Check5;
            newTestPackage.Check6 = testPackage.Check6;
            newTestPackage.Check7 = testPackage.Check7;
            newTestPackage.Check8 = testPackage.Check8;
            newTestPackage.Check9 = testPackage.Check9;
            newTestPackage.Check10 = testPackage.Check10;
            newTestPackage.Check11 = testPackage.Check11;
            newTestPackage.Check12 = testPackage.Check12;
            newTestPackage.TestMediumTemperature = testPackage.TestMediumTemperature;
            newTestPackage.AmbientTemperature = testPackage.AmbientTemperature;
            newTestPackage.HoldingTime = testPackage.HoldingTime;
            newTestPackage.State = testPackage.State;
            newTestPackage.TestDate = testPackage.TestDate;
            db.SubmitChanges();
        }

        /// <summary>
        /// 根据主键删除试压信息
        /// </summary>
        /// <param name="testPackageID">试压主键</param>
        public static void DeleteTestPackage(string testPackageID)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_TestPackage testPackage = db.PTP_TestPackage.First(e => e.PTP_ID == testPackageID);
            var itemEndCheckLists = from x in db.PTP_ItemEndCheckList where x.PTP_ID == testPackageID select x;
            foreach (var item in itemEndCheckLists)
            {
                var ItemCheck = from x in db.PTP_ItemEndCheck where x.ItemEndCheckListId == item.ItemEndCheckListId select x;
                if (ItemCheck != null)
                {
                    db.PTP_ItemEndCheck.DeleteAllOnSubmit(ItemCheck);
                    db.SubmitChanges();
                }
                var Approve = from x in db.PTP_TestPackageApprove where x.ItemEndCheckListId == item.ItemEndCheckListId select x;
                if (Approve != null)
                {
                    db.PTP_TestPackageApprove.DeleteAllOnSubmit(Approve);
                    db.SubmitChanges();
                }
            }

            db.PTP_TestPackage.DeleteOnSubmit(testPackage);
            db.SubmitChanges();
        }

        /// <summary>
        /// 根据主键删除试压信息明细
        /// </summary>
        /// <param name="testPackageID">试压主键</param>
        public static void DeletePipelineListByPTP_ID(string testPackageID)
        {
            Model.SGGLDB db = Funs.DB;
            var testPackage = from x in db.PTP_PipelineList where x.PTP_ID == testPackageID select x;
            if (testPackage != null)
            {
                db.PTP_PipelineList.DeleteAllOnSubmit(testPackage);
                db.SubmitChanges();
            }
        }

        /// <summary>
        /// 增加试压信息明细
        /// </summary>
        /// <param name="IsoList">试压明细实体</param>
        public static void AddPipelineList(Model.PTP_PipelineList IsoList)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_PipelineList newPipelineList = new Model.PTP_PipelineList();
            newPipelineList.PT_PipeId = SQLHelper.GetNewID(typeof(Model.PTP_PipelineList));
            newPipelineList.PTP_ID = IsoList.PTP_ID;
            newPipelineList.PipelineId = IsoList.PipelineId;
            newPipelineList.PT_DataType = IsoList.PT_DataType;
            newPipelineList.DesignPress = IsoList.DesignPress;
            newPipelineList.DesignTemperature = IsoList.DesignTemperature;
            newPipelineList.AmbientTemperature = IsoList.AmbientTemperature;
            newPipelineList.TestMedium = IsoList.TestMedium;
            newPipelineList.TestMediumTemperature = IsoList.TestMediumTemperature;
            newPipelineList.TestPressure = IsoList.TestPressure;
            newPipelineList.HoldingTime = IsoList.HoldingTime;
            db.PTP_PipelineList.InsertOnSubmit(newPipelineList);
            db.SubmitChanges();
        }
        /// <summary>
        /// 修改试压信息明细
        /// </summary>
        /// <param name="IsoList">试压明细实体</param>
        public static void UpdatePipelineList(Model.PTP_PipelineList IsoList)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_PipelineList newPipelineList = db.PTP_PipelineList.FirstOrDefault(e => e.PT_PipeId == IsoList.PT_PipeId);
            newPipelineList.PTP_ID = IsoList.PTP_ID;
            newPipelineList.PipelineId = IsoList.PipelineId;
            newPipelineList.PT_DataType = IsoList.PT_DataType;
            newPipelineList.DesignPress = IsoList.DesignPress;
            newPipelineList.DesignTemperature = IsoList.DesignTemperature;
            newPipelineList.AmbientTemperature = IsoList.AmbientTemperature;
            newPipelineList.TestMedium = IsoList.TestMedium;
            newPipelineList.TestMediumTemperature = IsoList.TestMediumTemperature;
            newPipelineList.TestPressure = IsoList.TestPressure;
            newPipelineList.HoldingTime = IsoList.HoldingTime;
            db.SubmitChanges();
        }

        /// <summary>
        /// 根据单位获取试压
        /// </summary>
        /// <param name="unitId"></param>
        /// <returns></returns>
        public static int GetTestPackageByUnitId(string unitId)
        {
            var q = (from x in Funs.DB.PTP_TestPackage where x.UnitId == unitId select x).ToList();
            return q.Count();
        }
        /// <summary>
        /// 根据装置获取试压
        /// </summary>
        /// <param name="installationId"></param>
        /// <returns></returns>
        //public static int GetTestPackageByInstallationId(string installationId)
        //{
        //    var q = (from x in Funs.DB.PTP_TestPackage where x.InstallationId == installationId select x).ToList();
        //    return q.Count();
        //}

        /// <summary>
        /// 试压包编号是否存在
        /// </summary>
        /// <param name="pointNo"></param>
        /// <param name="pointId"></param>
        /// <returns></returns>
        public static bool IsExistTestPackageCode(string TestPackageNo, string PTP_ID, string projectId)
        {
            if (!string.IsNullOrEmpty(PTP_ID))
            {
                var q = Funs.DB.PTP_TestPackage.FirstOrDefault(x => x.TestPackageNo == TestPackageNo && x.ProjectId == projectId && x.PTP_ID != PTP_ID);
                if (q != null)
                {
                    return true;
                }
                else
                {
                    return false;
                }
            }
            else
            {
                var q = Funs.DB.PTP_TestPackage.FirstOrDefault(x => x.TestPackageNo == TestPackageNo && x.ProjectId == projectId);
                if (q != null)
                {
                    return true;
                }
                else
                {
                    return false;
                }
            }
        }

        /// <summary>
        /// 试压包是否全部（需要热处理或硬度处理的已经全部处理）
        /// </summary>
        /// <param name="PTP_ID"></param>
        /// <returns></returns>
        public static string IsExistNoHotHardItem(string PTP_ID)
        {
            string isohot = string.Empty;
            var pipelineList = from x in Funs.DB.PTP_PipelineList where x.PTP_ID == PTP_ID select x;
            if (pipelineList.Count() > 0)
            {
                foreach (var pipe in pipelineList)
                {
                    var jots = from x in Funs.DB.HJGL_WeldJoint where x.PipelineId == pipe.PipelineId && x.IsHotProess == true select x;
                    if (jots.Count() > 0)
                    {
                        string jotMessage = string.Empty;
                        foreach (var jotItem in jots)
                        {
                            var hotProssItem = Funs.DB.HJGL_HotProess_TrustItem.FirstOrDefault(x => x.WeldJointId == jotItem.WeldJointId);
                            if (hotProssItem == null)
                            {
                                jotMessage += "焊口：" + jotItem.WeldJointCode + "未作热处理；";
                            }
                            else
                            {
                                var hotHardItem = Funs.DB.HJGL_Hard_TrustItem.FirstOrDefault(x => x.WeldJointId == jotItem.WeldJointId);
                                if (hotHardItem == null)
                                {
                                    jotMessage += "焊口：" + jotItem.WeldJointCode + "未作硬度检测；";
                                }
                            }

                        }

                        if (!string.IsNullOrEmpty(jotMessage))
                        {
                            var isoinfo = BLL.PipelineService.GetPipelineByPipelineId(pipe.PipelineId);
                            if (isoinfo != null)
                            {
                                isohot += "管线：" + isoinfo.PipelineCode + "中" + jotMessage;
                            }
                        }
                    }
                }
            }
            return isohot;
        }

        /// <summary>
        /// 检验试压包检测率（管线中设置的每个检测方法的检测比例是否达标）
        /// </summary>
        /// <param name="PTP_ID"></param>
        /// <returns></returns>
        public static string InspectionIsoRate(string PTP_ID)
        {
            Model.SGGLDB db = Funs.DB;
            string isoRate = string.Empty;
            var pipelineList = from x in db.PTP_PipelineList where x.PTP_ID == PTP_ID select x;
            if (pipelineList.Count() > 0)
            {
                foreach (var isoInfo in pipelineList)
                {
                    var isoinfo = BLL.PipelineService.GetPipelineByPipelineId(isoInfo.PipelineId);
                    if (isoinfo != null)
                    {
                        decimal jotCouts = (from x in db.HJGL_WeldJoint where x.PipelineId == isoinfo.PipelineId select x).Count(); //焊口总数                     
                        if (jotCouts > 0)
                        {
                            int? raleValue = null;
                            var rates = BLL.Base_DetectionRateService.GetDetectionRateByDetectionRateId(isoinfo.DetectionRateId); //探伤比例
                            if (rates != null)
                            {
                                raleValue = rates.DetectionRateValue;
                            }

                            if (raleValue.HasValue)
                            {
                                var checkJotCout = (from x in db.HJGL_Batch_NDEItem
                                                    join y in db.HJGL_Batch_BatchTrustItem on x.TrustBatchItemId equals y.TrustBatchItemId
                                                    join z in db.HJGL_Batch_BatchTrust on y.TrustBatchId equals z.TrustBatchId
                                                    join d in db.Base_DetectionType on z.DetectionTypeId equals d.DetectionTypeId
                                                    join e in db.HJGL_WeldJoint on y.WeldJointId equals e.WeldJointId
                                                    where e.PipelineId == isoInfo.PipelineId
                                                    //&& d.SysType == "射线检测"
                                                    select y.WeldJointId).Distinct().Count();
                                decimal? realRaleValue = Convert.ToDecimal(Convert.ToDecimal(checkJotCout) / jotCouts) * 100;
                                if (realRaleValue < raleValue)
                                {
                                    isoRate += "管线：" + isoinfo.PipelineCode + "的RT实际检测比例小于应检测比例值。";
                                }
                            }
                        }
                    }
                }
            }
            return isoRate;
        }
        public static void Init(FineUIPro.DropDownList dropName, string state, bool isShowPlease)
        {
            dropName.DataValueField = "Value";
            dropName.DataTextField = "Text";
            dropName.DataSource = GetHandleTypeByState(state);
            dropName.DataBind();
            if (isShowPlease)
            {
                Funs.FineUIPleaseSelect(dropName);
            }
        }
        /// <summary>
        /// 根据状态选择下一步办理类型
        /// </summary>
        /// <param name="state"></param>
        /// <returns></returns>
        public static ListItem[] GetHandleTypeByState(string state)
        {
            if (state == BLL.Const.TestPackage_Compile)
            {
                ListItem[] lis = new ListItem[1];
                lis[0] = new ListItem("施工分包商整改", Const.TestPackage_Audit1);
                return lis;
            }
            else if (state == Const.TestPackage_Audit1 || state == Const.TestPackage_ReAudit2)
            {
                ListItem[] lis = new ListItem[1];
                lis[0] = new ListItem("总包确认", Const.TestPackage_Audit2);
                return lis;
            }
            else if (state == Const.TestPackage_Audit2)//有是否同意
            {
                ListItem[] lis = new ListItem[2];
                lis[0] = new ListItem("监理确认", Const.TestPackage_Audit3);//是 加载
                lis[1] = new ListItem("审批完成", Const.TestPackage_Complete);//是加载
                return lis;
            }
            else if (state == Const.TestPackage_Audit3)
            {
                ListItem[] lis = new ListItem[1];
                lis[0] = new ListItem("审批完成", "5");
                return lis;
            }
            else if (state == "F")//选否
            {
                ListItem[] lis = new ListItem[1];
                lis[0] = new ListItem("施工分包商重新整改", Const.TestPackage_ReAudit2);//否加载
                return lis;
            }
            else
                return null;
        }

        /// <summary>
        /// 根据试压包号、单位工程获取试压包信息
        /// </summary>
        /// <param name="testPackageNo"></param>
        /// <param name="unitWorkId"></param>
        /// <returns></returns>
        public static PTP_TestPackage GetTestPackageByNo(string testPackageNo, string unitWorkId)
        {
            Model.SGGLDB db = Funs.DB;
            Model.PTP_TestPackage q = null;
            q = Funs.DB.PTP_TestPackage.FirstOrDefault(x => x.TestPackageNo == testPackageNo && x.UnitWorkId == unitWorkId);
            return q;
        }


        public static List<Model.PTP_TestPackage> GetTestPackageByUnitWordId(string unitworkId)
        {
            var q = Funs.DB.PTP_TestPackage.Where(e => e.UnitWorkId == unitworkId).ToList();
            return q;
        }
        public static List<Model.PTP_TestPackage> GetTestPackageByProjectId(string projectid)
        {
            var q = Funs.DB.PTP_TestPackage.Where(e => e.ProjectId == projectid).ToList();
            return q;
        }

        public static void DeletePipelineListByUnitWorkId(string unitworkId)
        {
            var oldPipeline = GetTestPackageByUnitWordId(unitworkId);
            if (oldPipeline != null)
            {
                foreach (var pipeline in oldPipeline)
                {
                    DeletePipelineListByPTP_ID(pipeline.PTP_ID);
                }

            }
        }

        /// <summary>
        /// 根据单位工程删除相关试压包
        /// </summary>
        /// <param name="unitworkId"></param>
        public static void DeleteTestPackageByUnitworkId(string unitworkId)
        {
            Model.SGGLDB db = Funs.DB;
            var pipeline = db.PTP_TestPackage.Where(e => e.UnitWorkId == unitworkId);
            if (pipeline != null)
            {
                db.PTP_TestPackage.DeleteAllOnSubmit(pipeline);
                db.SubmitChanges();
            }
        }

        public static void AddPipelineLists(List<Model.PTP_PipelineList> pipelineList)
        {
            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
            {
                db.PTP_PipelineList.InsertAllOnSubmit(pipelineList);
                db.SubmitChanges();
            }
        }

        /// <summary>
        /// 修改试压包打印状态
        /// </summary>
        /// <param name="testPackage"></param>
        public static void UpdateTestPackagePrintState(Model.PTP_TestPackage testPackage)
        {
            Model.PTP_TestPackage newTestPackage = Funs.DB.PTP_TestPackage.FirstOrDefault(e => e.PTP_ID == testPackage.PTP_ID);
            if (newTestPackage != null)
            {
                newTestPackage.PrintState = testPackage.PrintState;
                Funs.DB.SubmitChanges();
            }
        }

        /// <summary>
        /// 计算试压包页面 ShowGridItem 需要的统计信息。
        /// - 根据项目系统设置（SetId = "5"）判断是否按管线组批（包含 "6"）
        /// - 若按管线组批：按 PTP_PipelineList 对应的每条管线计算统计（等价于页面分行判断），返回 Count1..Count4
        /// - 若不按管线组批：按页面原逻辑汇总整包的统计并返回（含 lab12.Label） 
        /// 注意：方法只返回统计结果与标志，具体 UI 行样式仍由页面根据数据及返回结果决定。
        /// </summary>
        public static TestPackageAnalyzeOutput getTestPackageAnalyze(string PTP_ID, string projectId)
        {
            // 返回结果对象，包含统计信息
            var result = new TestPackageAnalyzeOutput();
            Model.SGGLDB db = Funs.DB;
            var testPackage = db.PTP_TestPackage.FirstOrDefault(p => p.PTP_ID == PTP_ID);
            if (testPackage == null) return null; // 无效试压包，直接返回空结果
            result.PTP_ID = PTP_ID;
            result.TestPackageNo = testPackage.TestPackageNo;
            result.UnitWorkName = BLL.UnitWorkService.GetUnitWorkALLName(testPackage.UnitWorkId);
            //判断当前试压包的状态
            result.StateStr = State.试压前条件未确认.ToString();

            if (testPackage.AduditDate.HasValue)
            {
                result.StateStr = State.试压前条件已确认.ToString();
            }
            var PtpItemEndCheckList = (from x in db.PTP_ItemEndCheckList where x.PTP_ID == PTP_ID select x).FirstOrDefault();
            if (PtpItemEndCheckList != null)
            {
                if (PtpItemEndCheckList.State == Const.TestPackage_Complete)
                {
                    result.StateStr = State.尾项检查已整改.ToString();

                }
                else
                {
                    result.StateStr = State.尾项检查待整改.ToString();

                }
            }
            if (testPackage.FinishDate.HasValue)
            {
                result.StateStr = State.试压包已完成.ToString();

            }
            // 当前试压包下所有管线ID集合
            var pipelineIds = (from p in db.PTP_PipelineList where p.PTP_ID == PTP_ID select p.PipelineId).ToList();
            result.TotalPipelines = pipelineIds.Count;
            if (result.TotalPipelines == 0)
                return result;

            // 当前试压包下的焊口总数
            result.TotalWeldJoints = db.HJGL_WeldJoint.Count(w => pipelineIds.Contains(w.PipelineId));
            // 当前试压包下已焊接的焊口数
            result.CompletedWeldJoints = db.HJGL_WeldJoint.Count(w => pipelineIds.Contains(w.PipelineId) && w.WeldingDailyId != null);
            // 当前试压包下已检测的焊口数（去重）
            result.DetectedWeldJoints = (from x in db.HJGL_Batch_NDEItem
                                         join t in db.HJGL_Batch_BatchTrustItem on x.TrustBatchItemId equals t.TrustBatchItemId
                                         join j in db.HJGL_WeldJoint on t.WeldJointId equals j.WeldJointId
                                         where pipelineIds.Contains(j.PipelineId)
                                         select t.WeldJointId).Distinct().Count();
            if (result.TotalWeldJoints > 0)
            {
                // 焊口完成百分比
                result.WeldCompletionPercent = Math.Round((decimal)result.CompletedWeldJoints / result.TotalWeldJoints * 100, 2);
                // 检测完成百分比
                result.DetectionCompletionPercent = Math.Round((decimal)result.DetectedWeldJoints / result.TotalWeldJoints * 100, 2);
            }

            // 全通过管线计数
            int passCount = 0;
            // 系统设置，判断是否按管线组批
            var batch = BLL.Project_SysSetService.GetSysSetBySetId("5", projectId);
            if (batch != null && batch.SetValue != null && batch.SetValue.Contains("6"))
            {
                // 按管线组批，逐管线判断是否全通过
                var pipelineList = (from p in db.PTP_PipelineList
                                    join iso in db.HJGL_Pipeline on p.PipelineId equals iso.PipelineId
                                    where p.PTP_ID == PTP_ID
                                    select new { p.PipelineId, Iso = iso }).ToList();
                foreach (var item in pipelineList)
                {
                    // 当前管线总焊口数
                    int total = db.HJGL_WeldJoint.Count(w => w.PipelineId == item.PipelineId);
                    // 当前管线已焊接焊口数
                    int finished = db.HJGL_WeldJoint.Count(w => w.PipelineId == item.PipelineId && w.WeldingDailyId != null);
                    // 当前管线应检测比例
                    int? rateValue = null;
                    if (!string.IsNullOrEmpty(item.Iso.DetectionRateId))
                    {
                        var rate = db.Base_DetectionRate.FirstOrDefault(r => r.DetectionRateId == item.Iso.DetectionRateId);
                        if (rate != null) rateValue = rate.DetectionRateValue;
                    }
                    // 当前管线已检测焊口数
                    int detected = (from x in db.HJGL_Batch_NDEItem
                                    join t in db.HJGL_Batch_BatchTrustItem on x.TrustBatchItemId equals t.TrustBatchItemId
                                    join j in db.HJGL_WeldJoint on t.WeldJointId equals j.WeldJointId
                                    where j.PipelineId == item.PipelineId
                                    select t.WeldJointId).Distinct().Count();
                    // 检测比例
                    decimal ratio = (total > 0) ? (decimal)detected / total * 100 : 0M;
                    // 检查返修焊口的最新检测是否全部合格
                    bool allNDEItemOK = true;
                    var lastRepair = (from x in db.HJGL_RepairRecord
                                      join y in db.HJGL_WeldJoint on x.WeldJointId equals y.WeldJointId
                                      where x.ProjectId == projectId && y.PipelineId == item.PipelineId
                                      orderby x.NoticeDate descending
                                      select x).FirstOrDefault();
                    if (lastRepair != null)
                    {
                        // 返修批次
                        var batchTrustItem = db.HJGL_Batch_BatchTrustItem.FirstOrDefault(b => b.RepairRecordId == lastRepair.RepairRecordId);
                        if (batchTrustItem != null)
                        {
                            // 返修检测单
                            var lastNDE = db.HJGL_Batch_NDE.FirstOrDefault(n => n.TrustBatchId == batchTrustItem.TrustBatchId);
                            if (lastNDE != null)
                            {
                                // 检测单下所有检测项
                                var lastNDEItems = db.HJGL_Batch_NDEItem.Where(ni => ni.NDEID == lastNDE.NDEID);
                                if (lastNDEItems.Any())
                                {
                                    foreach (var ni in lastNDEItems)
                                    {
                                        // 检查是否有未全部合格的项
                                        if (ni.TotalFilm != null && ni.PassFilm != null && ni.TotalFilm != ni.PassFilm)
                                        {
                                            allNDEItemOK = false;
                                            break;
                                        }
                                    }
                                }
                                else allNDEItemOK = false;
                            }
                            else allNDEItemOK = false;
                        }
                        else allNDEItemOK = false;
                    }
                    // 满足所有条件才算全通过
                    if (!(total > finished) && !(rateValue.HasValue && rateValue.Value > ratio) && allNDEItemOK)
                        passCount++;
                }
            }
            else
            {
                // 整包判断
                var pipelineItem = db.PTP_PipelineList.FirstOrDefault(x => x.PTP_ID == PTP_ID);
                if (pipelineItem == null) return result;
                var pipeline = db.HJGL_Pipeline.FirstOrDefault(x => x.PipelineId == pipelineItem.PipelineId);
                if (pipeline == null) return result;
                // 整包所有焊口
                var totalJoint = from x in db.HJGL_WeldJoint
                                 join y in db.HJGL_Pipeline on x.PipelineId equals y.PipelineId
                                 join z in db.PTP_PipelineList on y.PipelineId equals z.PipelineId
                                 where z.PTP_ID == PTP_ID
                                 && y.DetectionRateId == pipeline.DetectionRateId
                                 && y.DetectionType.Contains(pipeline.DetectionType)
                                 select x;
                int totalJointNum = totalJoint.Count(); // 整包总焊口数
                int totalWeldingJointNum = totalJoint.Count(x => x.WeldingDailyId != null); // 整包已焊口数
                int notCloseBatch = (from x in db.HJGL_Batch_PointBatch
                                     join y in db.PTP_PipelineList on x.PipelineId equals y.PipelineId
                                     where y.PTP_ID == PTP_ID
                                     && x.DetectionRateId == pipeline.DetectionRateId
                                     && x.DetectionTypeId == pipeline.DetectionType && x.EndDate == null
                                     select x).Count(); // 未关闭批次数
                int allPointJointNum = (from x in db.HJGL_Batch_PointBatchItem
                                        join y in db.HJGL_Batch_PointBatch on x.PointBatchId equals y.PointBatchId
                                        join j in db.HJGL_WeldJoint on x.WeldJointId equals j.WeldJointId
                                        join p in db.PTP_PipelineList on j.PipelineId equals p.PipelineId
                                        where p.PTP_ID == PTP_ID
                                        && y.DetectionRateId == pipeline.DetectionRateId
                                        && y.DetectionTypeId == pipeline.DetectionType && x.PointState != null
                                        select x).Count(); // 所有检测点数
                int allOKCheckNum = (from x in db.HJGL_Batch_NDEItem
                                     join y in db.HJGL_Batch_NDE on x.NDEID equals y.NDEID
                                     join t in db.HJGL_Batch_BatchTrustItem on x.TrustBatchItemId equals t.TrustBatchItemId
                                     join z in db.HJGL_Batch_BatchTrust on t.TrustBatchId equals z.TrustBatchId
                                     join j in db.HJGL_WeldJoint on t.WeldJointId equals j.WeldJointId
                                     join p in db.PTP_PipelineList on j.PipelineId equals p.PipelineId
                                     where p.PTP_ID == PTP_ID
                                     && z.DetectionRateId == pipeline.DetectionRateId
                                     && x.DetectionTypeId == pipeline.DetectionType && x.CheckResult == "1"
                                     select x).Count(); // 所有合格检测点数
                // 满足所有条件才算全通过
                if (!(totalJointNum > totalWeldingJointNum) && !(notCloseBatch > 0) && !(allPointJointNum > allOKCheckNum))
                    passCount = result.TotalPipelines;
            }
            result.PassPipelines = passCount;// 全通过管线数
            // 计算管线通过率
            result.PipelinePassPercent = result.TotalPipelines > 0 ? Math.Round((decimal)passCount / result.TotalPipelines * 100, 2) : 0M;
            // 设置试压条件状态：>=100% -> 已具备；>=80% and <100% -> 易具备；<80% -> 未具备
            if (result.PipelinePassPercent >= 100M)
            {
                result.CanPressureTest = "已具备";
            }
            else if (result.PipelinePassPercent >= 80M)
            {
                result.CanPressureTest = "易具备";
            }
            else
            {
                result.CanPressureTest = "未具备";
            }
            return result;
        }

        /// <summary>
        /// 获取单位工程下已完成试压包的通过率（完成试压包的通过数/总数*100，保留两位小数）
        /// </summary>
        /// <param name="projectId">项目ID</param>
        /// <param name="unitWorkId">单位工程ID</param>
        /// <returns>完成率百分比</returns>
        public static decimal GetTestPackagePassPercentByUnitWorkId(string projectId, string unitWorkId)
        {
            Model.SGGLDB db = Funs.DB;
            // 获取该单位工程下所有试压包
            int totalPipelines = db.PTP_TestPackage.Count(x => x.ProjectId == projectId && x.UnitWorkId == unitWorkId);
            if (totalPipelines == 0)
                return 0M;
            int finishedPipelines = db.PTP_TestPackage.Count(x => x.ProjectId == projectId && x.UnitWorkId == unitWorkId && x.FinishDate.HasValue);
            if (totalPipelines == 0)
                return 0M;
            return Math.Round((decimal)finishedPipelines / totalPipelines * 100, 2);
        }
        public static Dictionary<string, decimal> GetTestPackagePassPercentByProjectId(string projectId)
        {
            Model.SGGLDB db = Funs.DB;
            Dictionary<string, decimal> dic = new Dictionary<string, decimal>();
            // 获取该项目下所有单位工程分组统计
            var groupQuery = db.PTP_TestPackage
                .Where(x => x.ProjectId == projectId)
                .GroupBy(x => x.UnitWorkId)
                .Select(g => new
                {
                    UnitWorkId = g.Key,
                    Total = g.Count(),
                    Finished = g.Count(t => t.FinishDate.HasValue)
                }).ToList();
            foreach (var item in groupQuery)
            {
                decimal percent = item.Total > 0 ? Math.Round((decimal)item.Finished / item.Total * 100, 2) : 0M;
                dic[item.UnitWorkId] = percent;
            }
            return dic;
        }

    }
}