feat: 完善焊接质量检查和材料管理

补齐焊前专项审核和焊缝外观检测流程，统一质检查询、附件处理与材料明细导出，提升业务数据追溯和组件匹配使用效率。
2026-08-10 17:58:55 +08:00
parent bd73295ff8
commit 2de696fad2
48 changed files with 2252 additions and 131 deletions
@@ -0,0 +1,315 @@
+/*
+  焊接日报、下料专项审核、焊缝外观检测
+  日期：2026-08-07
+*/
+IF COL_LENGTH(N'dbo.HJGL_PreWeldCuttingCheck', N'ReviewState') IS NULL
+BEGIN
+    ALTER TABLE dbo.HJGL_PreWeldCuttingCheck
+        ADD ReviewState INT NOT NULL CONSTRAINT DF_HJGL_PreWeldCuttingCheck_ReviewState DEFAULT (0);
+END;
+GO
+
+IF COL_LENGTH(N'dbo.HJGL_PreWeldCuttingCheck', N'SpecialReviewerId') IS NULL
+    ALTER TABLE dbo.HJGL_PreWeldCuttingCheck ADD SpecialReviewerId NVARCHAR(50) NULL;
+IF COL_LENGTH(N'dbo.HJGL_PreWeldCuttingCheck', N'ReviewerId') IS NULL
+    ALTER TABLE dbo.HJGL_PreWeldCuttingCheck ADD ReviewerId NVARCHAR(50) NULL;
+IF COL_LENGTH(N'dbo.HJGL_PreWeldCuttingCheck', N'ReviewTime') IS NULL
+    ALTER TABLE dbo.HJGL_PreWeldCuttingCheck ADD ReviewTime DATETIME NULL;
+GO
+
+IF OBJECT_ID(N'dbo.HJGL_PreWeldCuttingCheckMaterial', N'U') IS NULL
+BEGIN
+    CREATE TABLE dbo.HJGL_PreWeldCuttingCheckMaterial
+    (
+        CuttingCheckMaterialId NVARCHAR(50) NOT NULL CONSTRAINT PK_HJGL_PreWeldCuttingCheckMaterial PRIMARY KEY,
+        CuttingCheckId NVARCHAR(50) NOT NULL,
+        PipeLineMatId NVARCHAR(50) NOT NULL,
+        MaterialSide INT NOT NULL,
+        OriginalMainCode NVARCHAR(100) NULL,
+        ReportedMainCode NVARCHAR(100) NULL,
+        IsBatchChanged BIT NOT NULL CONSTRAINT DF_HJGL_PreWeldCuttingCheckMaterial_IsBatchChanged DEFAULT (0),
+        CONSTRAINT FK_HJGL_PreWeldCuttingCheckMaterial_Check FOREIGN KEY (CuttingCheckId)
+            REFERENCES dbo.HJGL_PreWeldCuttingCheck(CuttingCheckId)
+    );
+    CREATE INDEX IX_HJGL_PreWeldCuttingCheckMaterial_Check
+        ON dbo.HJGL_PreWeldCuttingCheckMaterial(CuttingCheckId, MaterialSide);
+    CREATE INDEX IX_HJGL_PreWeldCuttingCheckMaterial_Material
+        ON dbo.HJGL_PreWeldCuttingCheckMaterial(PipeLineMatId, IsBatchChanged);
+END;
+GO
+
+IF OBJECT_ID(N'dbo.HJGL_WeldAppearanceCheck', N'U') IS NULL
+BEGIN
+    CREATE TABLE dbo.HJGL_WeldAppearanceCheck
+    (
+        AppearanceCheckId NVARCHAR(50) NOT NULL CONSTRAINT PK_HJGL_WeldAppearanceCheck PRIMARY KEY,
+        ProjectId NVARCHAR(50) NOT NULL,
+        WeldJointId NVARCHAR(50) NOT NULL,
+        IsQualified BIT NOT NULL,
+        CheckPerson NVARCHAR(50) NOT NULL,
+        CheckTime DATETIME NOT NULL,
+        Remark NVARCHAR(500) NULL,
+        CreateUser NVARCHAR(50) NULL,
+        CreateTime DATETIME NOT NULL,
+        ModifyUser NVARCHAR(50) NULL,
+        ModifyTime DATETIME NULL,
+        CONSTRAINT FK_HJGL_WeldAppearanceCheck_WeldJoint FOREIGN KEY (WeldJointId)
+            REFERENCES dbo.HJGL_WeldJoint(WeldJointId)
+    );
+    CREATE INDEX IX_HJGL_WeldAppearanceCheck_JointLatest
+        ON dbo.HJGL_WeldAppearanceCheck(WeldJointId, CheckTime DESC, CreateTime DESC);
+    CREATE INDEX IX_HJGL_WeldAppearanceCheck_Project
+        ON dbo.HJGL_WeldAppearanceCheck(ProjectId, CheckTime DESC);
+END;
+GO
+
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_Menu WHERE MenuId = N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901')
+BEGIN
+    INSERT dbo.Sys_Menu(MenuId, MenuName, Url, SortIndex, SuperMenu, MenuType, IsOffice, IsEnd, IsUsed)
+    VALUES(N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901', N'焊缝外观检测记录',
+           N'HJGL/WeldingManage/WeldAppearanceCheck.aspx', 60,
+           N'4D36E99E-B3D8-4C61-826A-CBD98EC51515', N'Menu_HJGL', 0, 1, 1);
+END;
+GO
+
+DECLARE @AppearanceMenuId NVARCHAR(50) = N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901';
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@AppearanceMenuId AND ButtonName=N'新增')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @AppearanceMenuId, N'新增', 1);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@AppearanceMenuId AND ButtonName=N'保存')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @AppearanceMenuId, N'保存', 2);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@AppearanceMenuId AND ButtonName=N'修改')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @AppearanceMenuId, N'修改', 3);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@AppearanceMenuId AND ButtonName=N'删除')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @AppearanceMenuId, N'删除', 4);
+GO
+
+ALTER view [dbo].[View_HJGL_WeldJoint] as
+    SELECT jot.[ProjectId]                                                                                                          --项目Id
+         , pipe.[UnitWorkId]                                                                                                        --单位工程Id
+         , uw.UnitWorkName                                                                                                          --单位工程
+         , pipe.[UnitId]                                                                                                            --单位Id
+         , unit.UnitName                                                                                                            --单位
+         , jot.[PipelineCode]                                                                                                       --管线号
+         , pipe.[SingleNumber]                                                                                                      --单线图号
+         , pipe.[SingleName]                                                                                                        --图纸名称
+         , pipe.[MediumId]                                                                                                          --介质Id
+         , medium.MediumCode
+         , medium.MediumName                                                                                                        --介质名称
+         , pipe.[PipingClassId]                                                                                                     --管道等级Id
+         , pipingClass.PipingClassCode                                                                                              --管道等级
+         , pipe.[DetectionRateId]                                                                                                   --探伤比例Id
+         , dr.DetectionRateCode                                                                                                     --探伤比例（例如5，10，20）
+         , pipe.DetectionType                                                                                                       --探伤类型Id(可能多个，中间用|分隔)
+         , STUFF((SELECT ',' + DetectionTypeCode
+                  FROM Base_DetectionType
+                  WHERE CHARINDEX('|' + LTRIM(DetectionTypeId) + '|', '|' + pipe.DetectionType + '|') > 0
+                  FOR XML PATH('')), 1, 1, '')                                                        AS DetectionTypeStr           --探伤类型（可能多个，中间用,分隔）
+         , pipe.DesignTemperature                                                                                                   --设计温度℃
+         , pipe.DesignPress                                                                                                         --设计压力Mpa(g)
+         , pipe.TestMedium                                                                                                          --压力试验介质Id
+         , tm.MediumName                                                                              AS TestMediumName             --压力试验介质
+         , pipe.TestPressure                                                                                                        --压力试验压力Mpa(g)
+         , pipe.PressurePipingClassId                                                                                               --压力管道级别Id
+         , ppc.PressurePipingClassCode                                                                                              --压力管道级别
+         , pipe.PipeLenth                                                                                                           --管线长度(m)
+         , pipe.LeakMedium                                                                                                          --泄露性试验介质Id
+         , tm2.MediumName                                                                             AS LeakMediumName             --泄露性试验介质
+         , pipe.LeakPressure                                                                                                        --泄露性试验压力Mpa(g)
+         , pipe.PCMedium                                                                                                            --吹洗要求Id
+         , pm.PurgeMethodCode                                                                                                       --吹洗要求
+         , pipe.VacuumPressure                                                                                                      --真空试验压力Kpa(a)
+         , pipe.MaterialId                                                                                                          --材质Id
+         , mat.MaterialCode                                                                           AS PipeMaterialCode           --材质
+         , pipe.Remark                                                                                AS PipeRemark                 --备注
+         , jot.FlowingSection                                                                        as FlowingSection             --流水段
+         , jot.[WeldJointId]                                                                                                        --焊口Id
+         , jot.[WeldJointCode]                                                                                                      --焊口号
+         , jot.[Material1Id]                                                                                                        --材质1Id
+         , mat1.MaterialCode                                                                          AS Material1Code              --材质1
+         , jot.[Material2Id]                                                                                                        --材质2Id
+         , mat2.MaterialCode                                                                          AS Material2Code              --材质2
+         , jot.[Dia]                                                                                                                --外径
+         , jot.DNDia                                                                                                                --DN公称直径
+         , jot.[Size]                                                                                                               --达因
+         , jot.[Thickness]                                                                                                          --壁厚
+         , jot.[Specification]                                                                                                      --规格
+         , jot.[WeldTypeId]                                                                                                         --焊缝类型Id
+         , WeldType.WeldTypeCode                                                                                                    --焊缝类型
+         , jot.[DetectionTypeId]                                                                                                    --检测类型Id
+         , ndt.DetectionTypeCode                                                                                                    --检测类型
+         , jot.[Components1Id]                                                                                                      --组件1号Id
+         , com1.ComponentsCode                                                                        AS ComponentsCode1            --组件1号
+         , jot.[Components2Id]                                                                                                      --组件2号Id
+         , com2.ComponentsCode                                                                        AS ComponentsCode2            --组件2号
+         , jot.DesignIsHotProess                                                                                                    --是否热处理
+         , CASE jot.DesignIsHotProess WHEN 1 THEN '是' ELSE '否' END                                  AS DesignIsHotProessStr       --是否热处理
+         , jot.[WeldingMethodId]                                                                                                    --焊接方法Id
+         , WeldingMethod.WeldingMethodCode                                                                                          --焊接方法
+         , jot.WPQId                                                                                                                --WPS的Id
+         , wps.WPQCode                                                                                                              --WPS编号
+         , jot.MatchableWPQ                                                                                                         --可匹配WPQ
+         , jot.[GrooveTypeId]                                                                                                       --坡口类型Id
+         , GrooveType.GrooveTypeCode                                                                                                --坡口类型
+         , jot.[WeldingRod]                                                                                                         --焊条Id
+         , rod.ConsumablesCode                                                                        AS WeldingRodCode             --焊条
+         , jot.[WeldingWire]                                                                                                        --焊丝Id
+         , wire.ConsumablesCode                                                                       AS WeldingWireCode            --焊丝
+         , jot.PreTemperature                                                                                                       --预热温度
+         , jot.[JointAttribute]                                                                                                     --焊口属性
+         , jot.TwoJointType                                                                                                         --二次焊口新增类型
+         , pipe.PipeArea                                                                                                            --工厂预制/现场安装
+         , daily.WeldingDate                                                                          as WeldingDateD
+         , CONVERT(VARCHAR(100), daily.WeldingDate, 23)                                               AS WeldingDate                --焊接日期
+         , BackingWelder.WelderCode                                                                   AS BackingWelderCode          --打底焊工
+         , CoverWelder.WelderCode                                                                     AS CoverWelderCode            --盖面焊工
+         , CoverWelderTeamGroup.TeamGroupName                                                         as CoverWelderTeamGroupName   ----盖面焊工班组
+         , BackingWelderTeamGroup.TeamGroupName                                                       as BackingWelderTeamGroupName --打底焊工班组
+         , (CASE (SELECT COUNT(*)
+                  FROM [dbo].[HJGL_HotProess_TrustItem] hpti
+                  WHERE hpti.WeldJointId = jot.WeldJointId)
+                WHEN 0 THEN ''
+                ELSE (SELECT TOP 1 ISNULL(ReportNo, '')
+                      FROM [dbo].[HJGL_HotProess_Trust] hpt
+                               LEFT JOIN [dbo].[HJGL_HotProess_TrustItem] hpti
+                                         ON hpti.HotProessTrustId = hpt.HotProessTrustId
+                      WHERE hpti.WeldJointId = jot.WeldJointId) END)                                  AS HotProessReportNo          --热处理报告编号
+         , (CASE (SELECT TOP 1 IsCompleted
+                  FROM [dbo].[HJGL_HotProess_TrustItem] hpti
+                  WHERE hpti.WeldJointId = jot.WeldJointId)
+                WHEN 1 THEN '完成'
+                WHEN 0 THEN '未完成'
+                ELSE '未热处理' END)                                                                  AS HotProessResult            --热处理检测结果
+         , (CASE (SELECT COUNT(*)
+                  FROM [dbo].HJGL_Hard_TrustItem hti
+                  WHERE hti.WeldJointId = jot.WeldJointId)
+                WHEN 0 THEN ''
+                ELSE (SELECT TOP 1 ISNULL(InspectionNum, '')
+                      FROM [dbo].HJGL_Hard_Trust ht
+                               LEFT JOIN [dbo].HJGL_Hard_TrustItem hti ON hti.HardTrustID = ht.HardTrustID
+                      WHERE hti.WeldJointId = jot.WeldJointId) END)                                   AS HardReportNo               --硬度报告编号
+         , (CASE (SELECT TOP 1 IsPass
+                  FROM [dbo].HJGL_Hard_TrustItem hti
+                  WHERE hti.WeldJointId = jot.WeldJointId)
+                WHEN 1 THEN '合格'
+                WHEN 0 THEN '不合格'
+                ELSE '待检测' END)                                                                    AS HardResult                 --硬度检测结果
+         , (CASE (SELECT COUNT(*)
+                  FROM [dbo].HJGL_Batch_BatchTrustItem bti
+                  WHERE bti.WeldJointId = jot.WeldJointId)
+                WHEN 0 THEN ''
+                ELSE (SELECT TOP 1 TrustBatchCode
+                      FROM [dbo].HJGL_Batch_BatchTrust bt
+                               LEFT JOIN [dbo].HJGL_Batch_BatchTrustItem bti ON bti.TrustBatchId = bt.TrustBatchId
+                      WHERE bti.WeldJointId = jot.WeldJointId) END)                                   AS TrustBatchCode             --委托单编号
+         , (CASE (SELECT COUNT(*)
+                  FROM [dbo].HJGL_Batch_NDEItem ndei
+                           LEFT JOIN [dbo].HJGL_Batch_BatchTrustItem bti ON bti.TrustBatchItemId = ndei.TrustBatchItemId
+                  WHERE bti.WeldJointId = jot.WeldJointId)
+                WHEN 0 THEN ''
+                ELSE (SELECT TOP 1 ISNULL(NDECode, '')
+                      FROM [dbo].HJGL_Batch_NDE nde
+                               LEFT JOIN [dbo].HJGL_Batch_NDEItem ndei ON ndei.NDEID = nde.NDEID
+                               LEFT JOIN [dbo].HJGL_Batch_BatchTrustItem bti
+                                         ON bti.TrustBatchItemId = ndei.TrustBatchItemId
+                      WHERE bti.WeldJointId = jot.WeldJointId) END)                                   AS NDECode                    --检测单编号
+         , (CASE (SELECT TOP 1 CheckResult
+                  FROM [dbo].HJGL_Batch_NDEItem ndei
+                           LEFT JOIN [dbo].HJGL_Batch_BatchTrustItem bti ON bti.TrustBatchItemId = ndei.TrustBatchItemId
+                  WHERE bti.WeldJointId = jot.WeldJointId)
+                WHEN '1' THEN '合格'
+                WHEN '2' THEN '不合格'
+                ELSE '' END)                                                                          AS CheckResult                --检测结果
+         , appearance.IsQualified                                                                    AS WeldAppearanceIsQualified
+         , CASE WHEN appearance.IsQualified = 1 THEN N'合格'
+                WHEN appearance.IsQualified = 0 THEN N'不合格'
+                ELSE N'未检测' END                                                                    AS WeldAppearanceResult
+         , jot.PipelineId
+         , jot.[JointArea]
+         , jot.[WeldingLocationId]
+         , jot.[HeartNo1]
+         , jot.[HeartNo2]
+         , jot.[IsHotProess]
+         , jot.[WeldingDailyId]
+         , jot.[BackingWelderId]
+         , jot.[CoverWelderId]
+         , jot.WeldingMode
+         , jot.Remark
+         , jot.IsTwoJoint
+         , jot.SubmitMan
+         , jot.AuditMan
+         , jot.AuditMan2
+         , jot.AuditDate
+         , jot.AuditDate2
+         , jot.WeldJointPoint
+         , task.TaskCode
+         , WeldingLocation.WeldingLocationCode
+         , CASE WHEN jot.WeldingDailyId IS NULL THEN '否' ELSE '是' END                               AS IsWelding
+         , CASE WHEN jot.WeldingDailyId IS NULL THEN '未完成' ELSE '已完成' END                       AS IsWeldOK
+         , CASE WHEN jot.IsHotProess = 1 THEN '是' ELSE '否' END                                      AS IsHotProessStr
+         , BackingWelder.PersonName                                                                   AS BackingWelderName
+         , CoverWelder.PersonName                                                                     AS CoverWelderName
+         , (CASE
+                WHEN CoverWelder.WelderCode IS NOT NULL AND BackingWelder.WelderCode IS NOT NULL
+                    THEN CoverWelder.WelderCode + '/' + BackingWelder.WelderCode
+                ELSE (ISNULL(CoverWelder.WelderCode, '') + ISNULL(BackingWelder.WelderCode, '')) END) AS WelderCode
+         ,                                                                                                                          --焊工
+        (CASE
+             WHEN mat1.MaterialCode IS NOT NULL AND mat2.MaterialCode IS NOT NULL
+                 THEN mat1.MaterialCode + '/' + mat2.MaterialCode
+             ELSE (ISNULL(mat1.MaterialCode, '') + ISNULL(mat2.MaterialCode, '')) END)                AS MaterialCode
+         ,                                                                                                                          --材质
+
+        daily.WeldingDailyCode
+         , pointItem.PointBatchId
+         , point.PointBatchCode
+         , (CASE
+                WHEN pointItem.PointState = '1' THEN '已点口'
+                WHEN pointItem.PointState = '2' THEN '已扩透'
+                ELSE '' END)                                                                          AS IsPoint
+    FROM [dbo].[HJGL_WeldJoint] jot
+             LEFT JOIN dbo.HJGL_Pipeline pipe ON pipe.PipelineId = jot.PipelineId
+             LEFT JOIN dbo.HJGL_WeldTask task ON task.WeldJointId = jot.WeldJointId
+             LEFT JOIN dbo.WBS_UnitWork uw ON uw.UnitWorkId = pipe.UnitWorkId
+             LEFT JOIN dbo.HJGL_WeldingDaily AS daily ON daily.WeldingDailyId = jot.WeldingDailyId
+             LEFT JOIN dbo.Base_Unit unit ON unit.UnitId = daily.UnitId
+             LEFT JOIN Base_WeldType AS WeldType ON WeldType.WeldTypeId = jot.WeldTypeId
+             LEFT JOIN dbo.Base_DetectionRate dr ON dr.DetectionRateId = pipe.DetectionRateId
+             LEFT JOIN Base_TestMedium tm ON tm.TestMediumId = pipe.TestMedium
+             LEFT JOIN Base_TestMedium tm2 ON tm2.TestMediumId = pipe.LeakMedium
+             LEFT JOIN Base_PurgeMethod pm ON pm.PurgeMethodId = pipe.PCMedium
+             LEFT JOIN Base_PressurePipingClass ppc ON ppc.PressurePipingClassId = pipe.PressurePipingClassId
+             LEFT JOIN Base_Material AS mat ON mat.MaterialId = pipe.MaterialId
+             LEFT JOIN Base_Material AS mat1 ON mat1.MaterialId = jot.Material1Id
+             LEFT JOIN Base_Material AS mat2 ON mat2.MaterialId = jot.Material2Id
+             LEFT JOIN Base_WeldingMethod AS WeldingMethod ON WeldingMethod.WeldingMethodId = jot.WeldingMethodId
+             LEFT JOIN Base_WeldingLocation AS WeldingLocation
+                       ON WeldingLocation.WeldingLocationId = jot.WeldingLocationId
+             LEFT JOIN Base_Consumables AS wire ON wire.ConsumablesId = jot.WeldingWire
+             LEFT JOIN Base_Consumables AS rod ON rod.ConsumablesId = jot.WeldingRod
+             LEFT JOIN Base_GrooveType AS GrooveType ON GrooveType.GrooveTypeId = jot.GrooveTypeId
+             LEFT JOIN Base_Components AS com1 ON com1.ComponentsId = jot.Components1Id
+             LEFT JOIN Base_Components AS com2 ON com2.ComponentsId = jot.Components2Id
+             LEFT JOIN SitePerson_Person AS BackingWelder
+                       ON BackingWelder.PersonId = jot.BackingWelderId and BackingWelder.ProjectId = jot.ProjectId
+             LEFT JOIN SitePerson_Person AS CoverWelder
+                       ON CoverWelder.PersonId = jot.CoverWelderId and CoverWelder.ProjectId = jot.ProjectId
+             LEFT JOIN Base_PipingClass AS pipingClass ON pipingClass.PipingClassId = pipe.PipingClassId
+             LEFT JOIN dbo.Base_Medium medium ON medium.MediumId = pipe.MediumId
+             LEFT JOIN dbo.Base_DetectionType ndt ON ndt.DetectionTypeId = jot.DetectionTypeId
+             LEFT JOIN dbo.WPQ_WPQList wps ON wps.WPQId = jot.WPQId
+             LEFT JOIN dbo.HJGL_Batch_PointBatchItem pointItem ON pointItem.WeldJointId = jot.WeldJointId
+             LEFT JOIN dbo.HJGL_Batch_PointBatch point ON point.PointBatchId = pointItem.PointBatchId
+             LEFT JOIN dbo.ProjectData_TeamGroup AS CoverWelderTeamGroup
+                       on CoverWelderTeamGroup.TeamGroupId = jot.CoverWelderTeamGroupId and
+                          CoverWelderTeamGroup.ProjectId = jot.ProjectId
+             LEFT JOIN dbo.ProjectData_TeamGroup AS BackingWelderTeamGroup
+                       on BackingWelderTeamGroup.TeamGroupId = jot.BackingWelderTeamGroupId and
+                          BackingWelderTeamGroup.ProjectId = jot.ProjectId
+             OUTER APPLY
+             (
+                 SELECT TOP 1 checkItem.IsQualified
+                 FROM dbo.HJGL_WeldAppearanceCheck checkItem
+                 WHERE checkItem.WeldJointId = jot.WeldJointId
+                 ORDER BY checkItem.CheckTime DESC, checkItem.CreateTime DESC, checkItem.AppearanceCheckId DESC
+             ) appearance;
+GO
@@ -0,0 +1,20 @@
+/* 焊接过程管理：焊缝外观检测记录 */
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_Menu WHERE MenuId = N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901')
+BEGIN
+    INSERT dbo.Sys_Menu(MenuId, MenuName, Url, SortIndex, SuperMenu, MenuType, IsOffice, IsEnd, IsUsed)
+    VALUES(N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901', N'焊缝外观检测记录',
+           N'HJGL/WeldingManage/WeldAppearanceCheck.aspx', 60,
+           N'4D36E99E-B3D8-4C61-826A-CBD98EC51515', N'Menu_HJGL', 0, 1, 1);
+END;
+GO
+
+DECLARE @MenuId NVARCHAR(50) = N'A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901';
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@MenuId AND ButtonName=N'新增')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @MenuId, N'新增', 1);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@MenuId AND ButtonName=N'保存')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @MenuId, N'保存', 2);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@MenuId AND ButtonName=N'修改')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @MenuId, N'修改', 3);
+IF NOT EXISTS (SELECT 1 FROM dbo.Sys_ButtonToMenu WHERE MenuId=@MenuId AND ButtonName=N'删除')
+    INSERT dbo.Sys_ButtonToMenu(ButtonToMenuId, MenuId, ButtonName, SortIndex) VALUES(NEWID(), @MenuId, N'删除', 4);
+GO
@@ -47,7 +47,9 @@ namespace BLL
                                                        where m.WeldJointId == weldJointId
                                                        select new Model.PreWeldMaterialItem
                                                        {
-                                                            MaterialCode = lib.MaterialCode,
+                                                            PipeLineMatId = m.PipeLineMatId,
+                                                            MainCode = m.MaterialCode,
+                                                            MaterialCode = m.MaterialCode,
                                                            MaterialName = lib.MaterialName,
                                                            MaterialSpec = lib.MaterialSpec,
                                                            MaterialMade = lib.MaterialMade,
@@ -61,6 +63,10 @@ namespace BLL
                var item = query.FirstOrDefault();
                if (item != null)
                {
+                    for (int index = 0; index < item.preWeldMaterialItems.Count; index++)
+                    {
+                        item.preWeldMaterialItems[index].MaterialSide = index + 1;
+                    }
                    SetInspectionAttachUrl(db, item);
                }

@@ -73,44 +79,7 @@ namespace BLL
        /// </summary>
        public static List<Model.PreWeldCuttingCheckItem> GetCuttingChecksByWeldJointId(string weldJointId)
        {
-            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
-            {
-                var data = (from c in db.HJGL_PreWeldCuttingCheck
-                            join w in db.HJGL_WeldJoint on c.WeldJointId equals w.WeldJointId
-                            join p in db.Person_Persons on c.CheckPerson equals p.PersonId into persons
-                            from p in persons.DefaultIfEmpty()
-                            where c.WeldJointId == weldJointId
-                            orderby c.CheckTime descending
-                            select new Model.PreWeldCuttingCheckItem
-                            {
-                                CuttingCheckId = c.CuttingCheckId,
-                                ProjectId = c.ProjectId,
-                                WeldJointId = c.WeldJointId,
-                                PipelineCode = w.PipelineCode,
-                                WeldJointCode = w.WeldJointCode,
-                                CuttingLength = c.CuttingLength,
-                                GrooveForm = c.GrooveForm,
-                                GrooveAngle = c.GrooveAngle,
-                                IsMaterialCodeBatchNoAccurate = c.IsMaterialCodeBatchNoAccurate,
-                                IsMaterialQuantityAccurate = c.IsMaterialQuantityAccurate,
-                                IsQualified = c.IsQualified,
-                                CheckPerson = c.CheckPerson,
-                                CheckPersonName = p == null ? string.Empty : p.PersonName,
-                                CheckTime = c.CheckTime,
-                                CreateUser = c.CreateUser,
-                                CreateTime = c.CreateTime,
-                                AttachUrl1 = null,
-                                CheckResult = c.CheckResult,
-                                UnqualifiedReason = c.UnqualifiedReason,
-                                RectifyRequirement = c.RectifyRequirement,
-                                Remark = c.Remark
-                            }).ToList();
-                foreach (var item in data)
-                {
-                    item.AttachUrl1 = GetAttachUrl(db, Const.HJGL_PreWeldCuttingCheckMenuId, item.CuttingCheckId);
-                }
-                return data;
-            }
+            return PreWeldInspectionService.GetCuttingCheckItemsByWeldJointId(weldJointId);
        }

        /// <summary>
@@ -189,6 +158,26 @@ namespace BLL
            return PreWeldInspectionService.SaveCuttingCheck(item);
        }

+        public static string ReviewCuttingCheck(Model.PreWeldCuttingCheckReviewInput item)
+        {
+            return PreWeldInspectionService.ReviewCuttingCheck(item);
+        }
+
+        public static List<Model.BaseInfoItem> GetSpecialReviewers(string projectId)
+        {
+            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
+            {
+                return (from x in db.SitePerson_Person
+                        where x.ProjectId == projectId && x.States == Const.ProjectPersonStates_1
+                        orderby x.PersonName
+                        select new Model.BaseInfoItem
+                        {
+                            BaseInfoId = x.PersonId,
+                            BaseInfoName = x.PersonName
+                        }).Distinct().ToList();
+            }
+        }
+
        /// <summary>
        /// 保存组对检查
        /// </summary>
@@ -289,7 +289,14 @@ namespace BLL
                return "参数不能为空";
            }

-            string res = BLL.WeldingDailyService.SaveWeldingDailyTempDetailByMobile(newItem.WeldJointId, newItem.Personid, newItem.time, newItem.weldingLocation, newItem.welderType);
+            string res = BLL.WeldingDailyService.SaveWeldingDailyTempDetailByMobile(
+                newItem.WeldJointId,
+                newItem.Personid,
+                newItem.time,
+                newItem.weldingLocation,
+                newItem.welderType,
+                newItem.WeldingMethodId,
+                newItem.WeldTypeId);
            if (!string.IsNullOrEmpty(res))
            {
                return res;
@@ -464,6 +464,7 @@
    <Compile Include="HJGL\WeldingManage\PipelineMatService.cs" />
    <Compile Include="HJGL\WeldingManage\PipelineService.cs" />
    <Compile Include="HJGL\WeldingManage\PreWeldInspectionService.cs" />
+    <Compile Include="HJGL\WeldingManage\WeldAppearanceCheckService.cs" />
    <Compile Include="HJGL\WeldingManage\WeldingDailyService.cs" />
    <Compile Include="HJGL\WeldingManage\WeldJointService.cs" />
    <Compile Include="HJGL\WeldingManage\WeldTaskService.cs" />
@@ -42,6 +42,18 @@ namespace BLL
                                             g.Key,
                                             RealNum = g.Sum(x => x.ActNum) ?? 0,
                                         }).ToList();
+                ///实际材料出库数量列表
+                var RealOutMateriaList = (from x in db.Tw_OutputDetail
+                                          join master in db.Tw_OutputMaster on x.OutputMasterId equals master.Id
+                                          where master.ProjectId == projectid && master.WarehouseId == WarehouseId
+                                          group x by x.MaterialCode
+                    into g
+                                          where (string.IsNullOrEmpty(materialCode) || g.Key.Contains(materialCode))
+                                          select new
+                                          {
+                                              g.Key,
+                                              OutputNum = g.Sum(x => x.ActNum) ?? 0,
+                                          }).ToList();
                //库存数量
                var tw_MaterialStock = (from x in db.Tw_MaterialStock
                                        where x.WarehouseId == WarehouseId && x.ProjectId == projectid
@@ -50,6 +62,7 @@ namespace BLL
                var needMateriaList = NeedOutMateriaList.ToList();
                var materialCodeList = needMateriaList.Select(x => x.Key)
                    .Union(RealInMateriaList.Select(x => x.Key))
+                    .Union(RealOutMateriaList.Select(x => x.Key))
                    .Distinct()
                    .ToList();

@@ -62,6 +75,8 @@ namespace BLL
                                      from x in needGroup.DefaultIfEmpty()
                                      join y in RealInMateriaList on code equals y.Key into realGroup
                                      from y in realGroup.DefaultIfEmpty()
+                                      join o in RealOutMateriaList on code equals o.Key into outputGroup
+                                      from o in outputGroup.DefaultIfEmpty()
                                      join z in materialInfoList on code equals z.MaterialCode into infoGroup
                                      from z in infoGroup.DefaultIfEmpty()
                                      join m in tw_MaterialStock on code equals m.PipeLineMatCode into stockGroup
@@ -73,6 +88,7 @@ namespace BLL
                                          StockNum = m == null ? 0 : (decimal)m.StockNum,
                                          NeedNum = x == null ? 0 : x.NeedNum,
                                          RealNum = y == null ? 0 : y.RealNum,
+                                          OutputNum = o == null ? 0 : o.OutputNum,
                                          Code = z == null ? null : z.Code,
                                          HeatNo = z == null ? null : z.HeatNo,
                                          BatchNo = z == null ? null : z.BatchNo,
@@ -449,7 +465,8 @@ namespace BLL
        }

        /// <summary>
-        /// 获取单位工程下当前区域内同时存在已焊口和未焊口的组件汇总。
+        /// 获取单位工程下当前区域的组件导出汇总。
+        /// 每个组件返回一行；未焊达因量按未焊口统计，材料信息按当前区域组件材料明细统计。
        /// </summary>
        public static List<Tw_PartialWeldedComponentOutput> GetPartialWeldedComponents(string projectId, string unitWorkId, string pipeArea, string warehouseCode)
        {
@@ -476,17 +493,53 @@ namespace BLL
                                             z.UnitWorkId,
                                             m.UnitWorkName,
                                             x.PrefabricatedComponents,
+                                             x.MaterialCode,
+                                             x.MaterialCode2,
+                                             x.Number,
                                             w.WeldJointId,
+                                             w.Size,
                                             w.WeldingDailyId
                                         }).ToList();

-                var partialComponents = componentWeldRows
+                var materialCodes = componentWeldRows
+                    .Where(x => !string.IsNullOrEmpty(x.MaterialCode))
+                    .Select(x => x.MaterialCode)
+                    .Distinct()
+                    .ToList();
+                var materialCodeLibByMaterialCode = materialCodes.Any()
+                    ? db.HJGL_MaterialCodeLib
+                        .Where(x => materialCodes.Contains(x.MaterialCode))
+                        .ToList()
+                        .GroupBy(x => x.MaterialCode)
+                        .ToDictionary(x => x.Key, x => x.First())
+                    : new Dictionary<string, HJGL_MaterialCodeLib>();
+
+                var componentExports = componentWeldRows
                    .GroupBy(x => new { x.PipelineId, x.PipelineCode, x.UnitWorkId, x.UnitWorkName, x.PrefabricatedComponents })
                    .Select(group =>
                    {
                        var weldJoints = group.GroupBy(x => x.WeldJointId).Select(x => x.First()).ToList();
                        int weldedCount = weldJoints.Count(x => !string.IsNullOrEmpty(x.WeldingDailyId));
                        int totalCount = weldJoints.Count;
+                        // 材料编码优先采用匹配页面使用的 MaterialCode2，数量按当前区域组件材料明细汇总。
+                        var componentMaterialRows = group
+                            .Where(x => (x.Number ?? 0) > 0)
+                            .ToList();
+                        var materialGroups = componentMaterialRows
+                            .Select(x => new
+                            {
+                                MaterialCode = GetExportMaterialCode(x.MaterialCode, x.MaterialCode2, materialCodeLibByMaterialCode),
+                                Quantity = x.Number ?? 0
+                            })
+                            .Where(x => !string.IsNullOrEmpty(x.MaterialCode))
+                            .GroupBy(x => x.MaterialCode)
+                            .OrderBy(x => x.Key)
+                            .Select(x => new
+                            {
+                                MaterialCode = x.Key,
+                                Quantity = x.Sum(y => y.Quantity)
+                            })
+                            .ToList();
                        return new Tw_PartialWeldedComponentOutput
                        {
                            UnitWorkId = group.Key.UnitWorkId,
@@ -498,26 +551,30 @@ namespace BLL
                            PipeAreaText = pipeArea == PipelineService.PipeArea_SHOP ? "工厂预制" : "现场安装",
                            TotalWeldJointCount = totalCount,
                            WeldedWeldJointCount = weldedCount,
-                            UnweldedWeldJointCount = totalCount - weldedCount
+                            UnweldedWeldJointCount = totalCount - weldedCount,
+                            UnweldedDin = weldJoints
+                                .Where(x => string.IsNullOrEmpty(x.WeldingDailyId))
+                                .Sum(x => x.Size ?? 0),
+                            MaterialCode = string.Join("\n", materialGroups.Select(x => x.MaterialCode)),
+                            MaterialQuantity = string.Join("\n", materialGroups.Select(x => x.Quantity.ToString()))
                        };
                    })
-                    .Where(x => x.WeldedWeldJointCount > 0 && x.UnweldedWeldJointCount > 0)
                    .OrderBy(x => x.PipelineCode)
                    .ThenBy(x => x.PrefabricatedComponents)
                    .ToList();

-                if (!partialComponents.Any())
+                if (!componentExports.Any())
                {
-                    return partialComponents;
+                    return componentExports;
                }

                // 导出匹配率复用页面匹配规则，保证区域、未焊口及续作组件优先级完全一致。
-                var pipelineIds = partialComponents.Select(x => x.PipelineId).Distinct().ToList();
+                var pipelineIds = componentExports.Select(x => x.PipelineId).Distinct().ToList();
                var matchOutputs = GetPipeMatMatch(projectId, pipelineIds, warehouseCode, null, pipeArea);
                var componentRates = matchOutputs
                    .GroupBy(x => GetComponentKey(x.PipelineId, x.PrefabricatedComponents))
                    .ToDictionary(x => x.Key, x => x.First().ComponentMatchRate ?? 0);
-                foreach (var component in partialComponents)
+                foreach (var component in componentExports)
                {
                    decimal componentRate;
                    componentRates.TryGetValue(GetComponentKey(component.PipelineId, component.PrefabricatedComponents), out componentRate);
@@ -525,10 +582,24 @@ namespace BLL
                    component.ComponentMatchRateString = Math.Round(componentRate * 100, 2).ToString() + "%";
                }

-                return partialComponents;
+                return componentExports;
            }
        }

+        private static string GetExportMaterialCode(string materialCode, string materialCode2, Dictionary<string, HJGL_MaterialCodeLib> materialCodeLibByMaterialCode)
+        {
+            if (!string.IsNullOrEmpty(materialCode2))
+            {
+                return materialCode2;
+            }
+
+            HJGL_MaterialCodeLib materialLib;
+            return !string.IsNullOrEmpty(materialCode)
+                   && materialCodeLibByMaterialCode.TryGetValue(materialCode, out materialLib)
+                ? materialLib.Code
+                : materialCode;
+        }
+
        private static string GetJointAttributeByPipeArea(string pipeArea)
        {
            if (pipeArea == PipelineService.PipeArea_SHOP)
@@ -133,11 +133,19 @@ namespace BLL
                    join mat in Funs.DB.HJGL_MaterialCodeLib on x.MaterialCode equals mat.MaterialCode into mm
                    from mat in mm.DefaultIfEmpty()
                    join y in Funs.DB.Tw_InputMaster on x.InputMasterId equals y.Id
+                    join warehouse in Funs.DB.Base_Warehouse on y.WarehouseId equals warehouse.WarehouseId into warehouses
+                    from warehouse in warehouses.DefaultIfEmpty()
+                    join person in Funs.DB.Person_Persons on y.CreateMan equals person.PersonId into persons
+                    from person in persons.DefaultIfEmpty()
                    where inputMasterIds.Contains(x.InputMasterId)
                    orderby y.CusBillCode, x.SortIndex
                    select new
                    {
-                        入库单编号 = y.CusBillCode,
+                        y.CusBillCode,
+                        WarehouseName = warehouse == null ? y.WarehouseCode : warehouse.WarehouseName,
+                        y.TypeInt,
+                        CreateManName = person == null ? y.CreateMan : person.PersonName,
+                        y.CreateDate,
                        材料主编码 = x.MaterialCode,
                        材料编码 = mat.Code,
                        炉号 = mat.HeatNo,
@@ -146,8 +154,26 @@ namespace BLL
                        材料描述 = mat.MaterialDef,
                        计划数量 = x.PlanNum,
                        实际数量 = x.ActNum,
+                        y.Remark
                    };
-            return q;
+            // 类型字典无法转换为 SQL，先完成数据库查询，再生成固定顺序的 Excel 列。
+            return q.ToList().Select(x => new
+            {
+                编号 = x.CusBillCode,
+                仓库 = x.WarehouseName,
+                类型 = TwConst.TypeIntMap.FirstOrDefault(y => y.Value == x.TypeInt).Key,
+                发起人 = x.CreateManName,
+                发起时间 = x.CreateDate,
+                x.材料主编码,
+                x.材料编码,
+                x.炉号,
+                x.批号,
+                x.材料名称,
+                x.材料描述,
+                x.计划数量,
+                x.实际数量,
+                备注 = x.Remark
+            }).ToList();
        }
    }
 }
@@ -151,13 +151,26 @@ namespace BLL
        public static IEnumerable GetPrintListByOutputMasterIds(List<string> outputMasterIds)
        {
            var q = from x in Funs.DB.Tw_OutputDetail
-                    join y in Funs.DB.HJGL_MaterialCodeLib on x.MaterialCode equals y.MaterialCode
+                    join y in Funs.DB.HJGL_MaterialCodeLib on x.MaterialCode equals y.MaterialCode into materials
+                    from y in materials.DefaultIfEmpty()
                    join master in Funs.DB.Tw_OutputMaster on x.OutputMasterId equals master.Id
+                    join plan in Funs.DB.Tw_InOutPlanMaster on master.InOutPlanMasterId equals plan.Id into plans
+                    from plan in plans.DefaultIfEmpty()
+                    join warehouse in Funs.DB.Base_Warehouse on master.WarehouseId equals warehouse.WarehouseId into warehouses
+                    from warehouse in warehouses.DefaultIfEmpty()
+                    join person in Funs.DB.Person_Persons on master.CreateMan equals person.PersonId into persons
+                    from person in persons.DefaultIfEmpty()
+                    join unit in Funs.DB.Base_Unit on master.ReqUnitId equals unit.UnitId into units
+                    from unit in units.DefaultIfEmpty()
                    where outputMasterIds.Contains(x.OutputMasterId)
                    orderby master.CusBillCode
                    select new
                    {
-                        出库单编号 = master.CusBillCode,
+                        master.CusBillCode,
+                        WarehouseName = warehouse == null ? master.WarehouseCode : warehouse.WarehouseName,
+                        master.TypeInt,
+                        CreateManName = person == null ? master.CreateMan : person.PersonName,
+                        master.CreateDate,
                        材料主编码 = x.MaterialCode,
                        材料编码 = y.Code,
                        炉号 = y.HeatNo,
@@ -166,8 +179,30 @@ namespace BLL
                        材料描述 = y.MaterialDef,
                        计划数量 = x.PlanNum,
                        实际数量 = x.ActNum,
+                        master.WarehouseDate,
+                        ReqUnitName = unit == null ? master.ReqUnitId : unit.UnitName,
+                        Remark = plan == null ? null : plan.Remark
                    };
-            return q;
+            // 类型字典无法转换为 SQL，先完成数据库查询，再生成固定顺序的 Excel 列。
+            return q.ToList().Select(x => new
+            {
+                编号 = x.CusBillCode,
+                仓库 = x.WarehouseName,
+                类型 = TwConst.TypeIntMap.FirstOrDefault(y => y.Value == x.TypeInt).Key,
+                发起人 = x.CreateManName,
+                发起时间 = x.CreateDate,
+                x.材料主编码,
+                x.材料编码,
+                x.炉号,
+                x.批号,
+                x.材料名称,
+                x.材料描述,
+                x.计划数量,
+                x.实际数量,
+                出库时间 = x.WarehouseDate,
+                领用单位 = x.ReqUnitName,
+                备注 = x.Remark
+            }).ToList();
        }

    }
@@ -2944,6 +2944,8 @@ namespace BLL
        /// 下料抽检记录台账
        /// </summary>
        public const string HJGL_PreWeldCuttingCheckMenuId = "D1B5A8B7-5D2A-4C51-9B7E-6A2F15B7F002";
+        /// <summary>焊缝外观检测记录菜单ID</summary>
+        public const string HJGL_WeldAppearanceCheckMenuId = "A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901";

        /// <summary>
        /// 组对抽检列表台账
@@ -9,6 +9,9 @@ namespace BLL
    /// </summary>
    public static class PreWeldInspectionService
    {
+        public const int CuttingReviewCompleted = 0;
+        public const int CuttingReviewPending = 1;
+        public const int CuttingReviewApproved = 2;
        /// <summary>
        /// 获取下料检查台账
        /// </summary>
@@ -62,13 +65,14 @@ namespace BLL
                        CheckResult = x.c.CheckResult,
                        UnqualifiedReason = x.c.UnqualifiedReason,
                        RectifyRequirement = x.c.RectifyRequirement,
-                        Remark = x.c.Remark
+                        Remark = x.c.Remark,
+                        ReviewState = x.c.ReviewState,
+                        SpecialReviewerId = x.c.SpecialReviewerId,
+                        ReviewerId = x.c.ReviewerId,
+                        ReviewTime = x.c.ReviewTime
                    })
                    .ToList();
-                foreach (var item in data)
-                {
-                    item.AttachUrl1 = GetInspectionAttachUrl(db, Const.HJGL_PreWeldCuttingCheckMenuId, item.CuttingCheckId);
-                }
+                PopulateCuttingCheckDetails(db, data);

                return Tuple.Create(data, total);
            }
@@ -195,6 +199,48 @@ namespace BLL
            }
        }

+        public static List<Model.PreWeldCuttingCheckItem> GetCuttingCheckItemsByWeldJointId(string weldJointId)
+        {
+            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
+            {
+                var data = (from c in db.HJGL_PreWeldCuttingCheck
+                            join w in db.HJGL_WeldJoint on c.WeldJointId equals w.WeldJointId
+                            join p in db.Person_Persons on c.CheckPerson equals p.PersonId into persons
+                            from p in persons.DefaultIfEmpty()
+                            where c.WeldJointId == weldJointId
+                            orderby c.CheckTime descending, c.CreateTime descending
+                            select new Model.PreWeldCuttingCheckItem
+                            {
+                                CuttingCheckId = c.CuttingCheckId,
+                                ProjectId = c.ProjectId,
+                                WeldJointId = c.WeldJointId,
+                                PipelineCode = w.PipelineCode,
+                                WeldJointCode = w.WeldJointCode,
+                                CuttingLength = c.CuttingLength,
+                                GrooveForm = c.GrooveForm,
+                                GrooveAngle = c.GrooveAngle,
+                                IsMaterialCodeBatchNoAccurate = c.IsMaterialCodeBatchNoAccurate,
+                                IsMaterialQuantityAccurate = c.IsMaterialQuantityAccurate,
+                                IsQualified = c.IsQualified,
+                                CheckPerson = c.CheckPerson,
+                                CheckPersonName = p == null ? string.Empty : p.PersonName,
+                                CheckTime = c.CheckTime,
+                                CreateUser = c.CreateUser,
+                                CreateTime = c.CreateTime,
+                                CheckResult = c.CheckResult,
+                                UnqualifiedReason = c.UnqualifiedReason,
+                                RectifyRequirement = c.RectifyRequirement,
+                                Remark = c.Remark,
+                                ReviewState = c.ReviewState,
+                                SpecialReviewerId = c.SpecialReviewerId,
+                                ReviewerId = c.ReviewerId,
+                                ReviewTime = c.ReviewTime
+                            }).ToList();
+                PopulateCuttingCheckDetails(db, data);
+                return data;
+            }
+        }
+
        /// <summary>
        /// 按焊口获取组对记录
        /// </summary>
@@ -259,12 +305,69 @@ namespace BLL
                check.UnqualifiedReason = item.UnqualifiedReason;
                check.RectifyRequirement = item.RectifyRequirement;
                check.Remark = item.Remark;
+                bool requiresSpecialReview = !item.IsMaterialCodeBatchNoAccurate;
+                if (requiresSpecialReview && string.IsNullOrWhiteSpace(item.SpecialReviewerId))
+                {
+                    throw new ArgumentException("材料编码或批次不准确时必须选择专项审核办理人。");
+                }
+                if (requiresSpecialReview && !db.SitePerson_Person.Any(x => x.ProjectId == check.ProjectId
+                    && x.PersonId == item.SpecialReviewerId && x.States == Const.ProjectPersonStates_1))
+                {
+                    throw new ArgumentException("专项审核办理人不属于当前项目或已停用。");
+                }
+
+                check.ReviewState = requiresSpecialReview ? CuttingReviewPending : CuttingReviewCompleted;
+                check.SpecialReviewerId = requiresSpecialReview ? item.SpecialReviewerId : null;
+                check.ReviewerId = null;
+                check.ReviewTime = null;
+                SaveCuttingMaterialSnapshots(db, check, item.Materials);
+                SyncCuttingReviewTodo(db, check, item.CreateUser ?? item.CheckPerson);
                db.SubmitChanges();
                SaveInspectionAttachUrl(item.AttachUrl1, Const.HJGL_PreWeldCuttingCheckMenuId, check.CuttingCheckId);
                return check.CuttingCheckId;
            }
        }

+        public static string ReviewCuttingCheck(Model.PreWeldCuttingCheckReviewInput item)
+        {
+            if (item == null || string.IsNullOrWhiteSpace(item.CuttingCheckId))
+            {
+                throw new ArgumentException("下料检查记录ID不能为空。");
+            }
+
+            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
+            {
+                var check = db.HJGL_PreWeldCuttingCheck.FirstOrDefault(x => x.CuttingCheckId == item.CuttingCheckId);
+                if (check == null)
+                {
+                    throw new ArgumentException("未找到下料检查记录。");
+                }
+                if (check.ReviewState != CuttingReviewPending)
+                {
+                    throw new InvalidOperationException("该专项审核已办理或无需办理。");
+                }
+                if (string.IsNullOrWhiteSpace(item.ReviewerId) || check.SpecialReviewerId != item.ReviewerId)
+                {
+                    throw new InvalidOperationException("当前人员不是该专项审核的办理人。");
+                }
+
+                if (item.Materials != null)
+                {
+                    SaveCuttingMaterialSnapshots(db, check, item.Materials);
+                }
+                if (!string.IsNullOrWhiteSpace(item.Remark))
+                {
+                    check.Remark = item.Remark;
+                }
+                check.ReviewState = CuttingReviewApproved;
+                check.ReviewerId = item.ReviewerId;
+                check.ReviewTime = item.ReviewTime ?? DateTime.Now;
+                CompleteCuttingReviewTodo(db, check.CuttingCheckId, item.ReviewerId);
+                db.SubmitChanges();
+                return check.CuttingCheckId;
+            }
+        }
+
        /// <summary>
        /// 保存组对检查；传入主键时修改对应记录，否则新增一条记录
        /// </summary>
@@ -711,6 +814,133 @@ namespace BLL
            }
        }

+        private static void SaveCuttingMaterialSnapshots(Model.SGGLDB db, Model.HJGL_PreWeldCuttingCheck check,
+            IList<Model.PreWeldCuttingMaterialInput> materials)
+        {
+            var currentMaterials = db.HJGL_PipeLineMat
+                .Where(x => x.WeldJointId == check.WeldJointId)
+                .OrderBy(x => x.PipeLineMatId)
+                .ToList();
+            var inputs = materials ?? currentMaterials.Select((x, index) => new Model.PreWeldCuttingMaterialInput
+            {
+                PipeLineMatId = x.PipeLineMatId,
+                MaterialSide = index + 1,
+                ReportedMainCode = x.MaterialCode
+            }).ToList();
+
+            var existing = db.HJGL_PreWeldCuttingCheckMaterial
+                .Where(x => x.CuttingCheckId == check.CuttingCheckId)
+                .ToList();
+            var originalCodeMap = existing.GroupBy(x => x.PipeLineMatId)
+                .ToDictionary(x => x.Key, x => x.First().OriginalMainCode);
+            db.HJGL_PreWeldCuttingCheckMaterial.DeleteAllOnSubmit(existing);
+
+            int side = 0;
+            foreach (var input in inputs)
+            {
+                side++;
+                var material = currentMaterials.FirstOrDefault(x => x.PipeLineMatId == input.PipeLineMatId);
+                if (material == null)
+                {
+                    throw new ArgumentException("反馈材料不属于当前焊口。");
+                }
+                string reportedMainCode = string.IsNullOrWhiteSpace(input.ReportedMainCode)
+                    ? material.MaterialCode
+                    : input.ReportedMainCode.Trim();
+                db.HJGL_PreWeldCuttingCheckMaterial.InsertOnSubmit(new Model.HJGL_PreWeldCuttingCheckMaterial
+                {
+                    CuttingCheckMaterialId = Guid.NewGuid().ToString(),
+                    CuttingCheckId = check.CuttingCheckId,
+                    PipeLineMatId = material.PipeLineMatId,
+                    MaterialSide = input.MaterialSide > 0 ? input.MaterialSide : side,
+                    // 专项审核再次保存时保留首次提交快照，避免原始主编码被当前正式数据覆盖。
+                    OriginalMainCode = originalCodeMap.ContainsKey(material.PipeLineMatId)
+                        ? originalCodeMap[material.PipeLineMatId]
+                        : material.MaterialCode,
+                    ReportedMainCode = reportedMainCode,
+                    IsBatchChanged = !string.Equals(material.MaterialCode, reportedMainCode, StringComparison.OrdinalIgnoreCase)
+                });
+            }
+        }
+
+        private static void SyncCuttingReviewTodo(Model.SGGLDB db, Model.HJGL_PreWeldCuttingCheck check, string creator)
+        {
+            var todos = db.Workflow_TodoItems.Where(x => x.FlowId == check.CuttingCheckId
+                && x.WorkflowName == "下料抽检专项审核").ToList();
+            db.Workflow_TodoItems.DeleteAllOnSubmit(todos);
+            if (check.ReviewState != CuttingReviewPending)
+            {
+                return;
+            }
+
+            db.Workflow_TodoItems.InsertOnSubmit(new Model.Workflow_TodoItems
+            {
+                Id = SQLHelper.GetNewID(),
+                SysCode = WorkflowTodoitemsService.SysCode,
+                FlowId = check.CuttingCheckId,
+                RequestName = "下料抽检结果不准确，请专项审核",
+                WorkflowName = "下料抽检专项审核",
+                NodeName = "专项审核",
+                PCUrl = "HJGL/PreWeld/CuttingCheckEdit.aspx?CuttingCheckId=" + check.CuttingCheckId + "&review=1",
+                AppUrl = "/pages/hjgl/preWeld/cuttingCheckReview?cuttingCheckId=" + check.CuttingCheckId,
+                Creator = creator,
+                CreateDateTime = DateTime.Now,
+                Receiver = check.SpecialReviewerId,
+                ReceiveDateTime = DateTime.Now,
+                Status = (int)WorkflowTodoitemsService.Status.待办
+            });
+        }
+
+        private static void CompleteCuttingReviewTodo(Model.SGGLDB db, string cuttingCheckId, string reviewerId)
+        {
+            var todo = db.Workflow_TodoItems.FirstOrDefault(x => x.FlowId == cuttingCheckId
+                && x.Receiver == reviewerId
+                && x.WorkflowName == "下料抽检专项审核"
+                && x.Status == (int)WorkflowTodoitemsService.Status.待办);
+            if (todo != null)
+            {
+                todo.Status = (int)WorkflowTodoitemsService.Status.已办;
+            }
+        }
+
+        private static void PopulateCuttingCheckDetails(Model.SGGLDB db, IList<Model.PreWeldCuttingCheckItem> data)
+        {
+            if (data == null || data.Count == 0)
+            {
+                return;
+            }
+
+            var ids = data.Select(x => x.CuttingCheckId).ToList();
+            var snapshots = db.HJGL_PreWeldCuttingCheckMaterial
+                .Where(x => ids.Contains(x.CuttingCheckId))
+                .ToList();
+            var personIds = data.SelectMany(x => new[] { x.SpecialReviewerId, x.ReviewerId })
+                .Where(x => !string.IsNullOrEmpty(x)).Distinct().ToList();
+            var personNames = db.Person_Persons.Where(x => personIds.Contains(x.PersonId))
+                .ToDictionary(x => x.PersonId, x => x.PersonName);
+
+            foreach (var item in data)
+            {
+                item.AttachUrl1 = GetInspectionAttachUrl(db, Const.HJGL_PreWeldCuttingCheckMenuId, item.CuttingCheckId);
+                item.ReviewStateText = item.ReviewState == CuttingReviewPending
+                    ? "待专项审核"
+                    : item.ReviewState == CuttingReviewApproved ? "专项审核完成" : "普通完成";
+                string name;
+                item.SpecialReviewerName = personNames.TryGetValue(item.SpecialReviewerId ?? string.Empty, out name) ? name : string.Empty;
+                item.ReviewerName = personNames.TryGetValue(item.ReviewerId ?? string.Empty, out name) ? name : string.Empty;
+                item.Materials = snapshots.Where(x => x.CuttingCheckId == item.CuttingCheckId)
+                    .OrderBy(x => x.MaterialSide)
+                    .Select(x => new Model.PreWeldCuttingMaterialItem
+                    {
+                        PipeLineMatId = x.PipeLineMatId,
+                        MaterialSide = x.MaterialSide,
+                        OriginalMainCode = x.OriginalMainCode,
+                        ReportedMainCode = x.ReportedMainCode,
+                        IsBatchChanged = x.IsBatchChanged
+                    }).ToList();
+            }
+        }
+
        /// <summary>
        /// 根据菜单和记录ID获取检查附件地址
        /// </summary>
@@ -0,0 +1,292 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+
+namespace BLL
+{
+    /// <summary>
+    /// 焊缝外观检测业务服务。
+    /// </summary>
+    public static class WeldAppearanceCheckService
+    {
+        /// <summary>
+        /// 分页查询焊缝外观检测记录。
+        /// </summary>
+        /// <param name="projectId">项目ID。</param>
+        /// <param name="pipelineCode">管线号查询条件。</param>
+        /// <param name="weldJointCode">焊口号查询条件。</param>
+        /// <param name="qualified">合格状态，1为合格，0为不合格，空为全部。</param>
+        /// <param name="pageIndex">页码，从0开始。</param>
+        /// <param name="pageSize">每页记录数。</param>
+        /// <returns>外观检测记录及总记录数。</returns>
+        public static Tuple<List<Model.WeldAppearanceCheckItem>, int> GetList(string projectId,
+            string pipelineCode, string weldJointCode, string qualified, int pageIndex, int pageSize)
+        {
+            var db = Funs.DB;
+            var query = from c in db.HJGL_WeldAppearanceCheck
+                        join w in db.HJGL_WeldJoint on c.WeldJointId equals w.WeldJointId
+                        join p in db.Person_Persons on c.CheckPerson equals p.PersonId into persons
+                        from p in persons.DefaultIfEmpty()
+                        where string.IsNullOrEmpty(projectId) || c.ProjectId == projectId
+                        select new { c, w, CheckPersonName = p == null ? string.Empty : p.PersonName };
+
+            if (!string.IsNullOrWhiteSpace(pipelineCode))
+            {
+                query = query.Where(x => x.w.PipelineCode.Contains(pipelineCode));
+            }
+            if (!string.IsNullOrWhiteSpace(weldJointCode))
+            {
+                query = query.Where(x => x.w.WeldJointCode.Contains(weldJointCode));
+            }
+            if (qualified == "1" || qualified == "0")
+            {
+                bool isQualified = qualified == "1";
+                query = query.Where(x => x.c.IsQualified == isQualified);
+            }
+
+            int total = query.Count();
+            var data = query.OrderByDescending(x => x.c.CheckTime)
+                .ThenByDescending(x => x.c.CreateTime)
+                .Skip(pageIndex * pageSize)
+                .Take(pageSize)
+                .Select(x => new Model.WeldAppearanceCheckItem
+                {
+                    AppearanceCheckId = x.c.AppearanceCheckId,
+                    ProjectId = x.c.ProjectId,
+                    WeldJointId = x.c.WeldJointId,
+                    PipelineCode = x.w.PipelineCode,
+                    WeldJointCode = x.w.WeldJointCode,
+                    IsQualified = x.c.IsQualified,
+                    QualifiedText = x.c.IsQualified ? "合格" : "不合格",
+                    CheckPerson = x.c.CheckPerson,
+                    CheckPersonName = x.CheckPersonName,
+                    CheckTime = x.c.CheckTime,
+                    Remark = x.c.Remark,
+                    CreateTime = x.c.CreateTime
+                }).ToList();
+            PopulateAttachUrls(data);
+            return Tuple.Create(data, total);
+        }
+
+        /// <summary>
+        /// 分页查询当前项目中已焊接的焊口。
+        /// </summary>
+        /// <param name="projectId">项目ID。</param>
+        /// <param name="pipelineCode">管线号查询条件。</param>
+        /// <param name="weldJointCode">焊口号查询条件。</param>
+        /// <param name="pageIndex">页码，从0开始。</param>
+        /// <param name="pageSize">每页记录数。</param>
+        /// <returns>已焊接焊口列表。</returns>
+        public static List<Model.WeldAppearanceJointItem> GetWeldedJoints(string projectId,
+            string pipelineCode, string weldJointCode, int pageIndex, int pageSize)
+        {
+            var db = Funs.DB;
+            var query = db.View_HJGL_WeldJoint.Where(x => x.ProjectId == projectId && x.WeldingDailyId != null);
+            if (!string.IsNullOrWhiteSpace(pipelineCode))
+            {
+                query = query.Where(x => x.PipelineCode.Contains(pipelineCode));
+            }
+            if (!string.IsNullOrWhiteSpace(weldJointCode))
+            {
+                query = query.Where(x => x.WeldJointCode.Contains(weldJointCode));
+            }
+            return query.OrderBy(x => x.PipelineCode).ThenBy(x => x.WeldJointCode)
+                .Skip(pageIndex * pageSize).Take(pageSize)
+                .Select(x => new Model.WeldAppearanceJointItem
+                {
+                    WeldJointId = x.WeldJointId,
+                    ProjectId = x.ProjectId,
+                    PipelineCode = x.PipelineCode,
+                    WeldJointCode = x.WeldJointCode,
+                    WeldTypeCode = x.WeldTypeCode,
+                    WeldingMethodCode = x.WeldingMethodCode,
+                    WeldingDate = x.WeldingDateD
+                }).ToList();
+        }
+
+        /// <summary>
+        /// 查询焊口基础信息及历史外观检测记录。
+        /// </summary>
+        /// <param name="weldJointId">焊口ID。</param>
+        /// <returns>焊口详情及外观检测历史。</returns>
+        public static Model.WeldAppearanceJointItem GetJointDetail(string weldJointId)
+        {
+            var db = Funs.DB;
+            var joint = db.View_HJGL_WeldJoint.Where(x => x.WeldJointId == weldJointId)
+                .Select(x => new Model.WeldAppearanceJointItem
+                {
+                    WeldJointId = x.WeldJointId,
+                    ProjectId = x.ProjectId,
+                    PipelineCode = x.PipelineCode,
+                    WeldJointCode = x.WeldJointCode,
+                    WeldTypeCode = x.WeldTypeCode,
+                    WeldingMethodCode = x.WeldingMethodCode,
+                    WeldingDate = x.WeldingDateD
+                }).FirstOrDefault();
+            if (joint != null)
+            {
+                joint.History = GetHistory(weldJointId);
+            }
+            return joint;
+        }
+
+        /// <summary>
+        /// 根据记录ID查询焊缝外观检测记录。
+        /// </summary>
+        /// <param name="appearanceCheckId">外观检测记录ID。</param>
+        /// <returns>焊缝外观检测记录。</returns>
+        public static Model.WeldAppearanceCheckItem GetById(string appearanceCheckId)
+        {
+            var item = GetHistoryQuery().FirstOrDefault(x => x.AppearanceCheckId == appearanceCheckId);
+            if (item != null)
+            {
+                item.AttachUrl = GetAttachUrl(item.AppearanceCheckId);
+            }
+            return item;
+        }
+
+        /// <summary>
+        /// 新增或修改焊缝外观检测记录。
+        /// </summary>
+        /// <param name="item">外观检测结果及附件信息。</param>
+        /// <returns>外观检测记录ID。</returns>
+        public static string Save(Model.WeldAppearanceCheckInput item)
+        {
+            if (item == null || string.IsNullOrWhiteSpace(item.WeldJointId))
+            {
+                throw new ArgumentException("焊口不能为空。");
+            }
+
+            var db = Funs.DB;
+            var joint = db.HJGL_WeldJoint.FirstOrDefault(x => x.WeldJointId == item.WeldJointId);
+            if (joint == null || joint.WeldingDailyId == null)
+            {
+                throw new ArgumentException("只能对已焊接焊口进行外观检测。");
+            }
+
+            string id = string.IsNullOrWhiteSpace(item.AppearanceCheckId)
+                ? Guid.NewGuid().ToString()
+                : item.AppearanceCheckId;
+            var check = db.HJGL_WeldAppearanceCheck.FirstOrDefault(x => x.AppearanceCheckId == id);
+            bool hasExistingPhoto = db.AttachFile.Any(x => x.MenuId == Const.HJGL_WeldAppearanceCheckMenuId && x.ToKeyId == id);
+            if (string.IsNullOrWhiteSpace(item.AttachUrl) && !hasExistingPhoto)
+            {
+                throw new ArgumentException("请至少上传一张外观检测照片。");
+            }
+
+            if (check == null)
+            {
+                check = new Model.HJGL_WeldAppearanceCheck
+                {
+                    AppearanceCheckId = id,
+                    CreateTime = DateTime.Now,
+                    CreateUser = string.IsNullOrEmpty(item.CreateUser) ? item.CheckPerson : item.CreateUser
+                };
+                db.HJGL_WeldAppearanceCheck.InsertOnSubmit(check);
+            }
+            else
+            {
+                check.ModifyUser = string.IsNullOrEmpty(item.CreateUser) ? item.CheckPerson : item.CreateUser;
+                check.ModifyTime = DateTime.Now;
+            }
+
+            check.ProjectId = string.IsNullOrEmpty(item.ProjectId) ? joint.ProjectId : item.ProjectId;
+            check.WeldJointId = item.WeldJointId;
+            check.IsQualified = item.IsQualified;
+            check.CheckPerson = item.CheckPerson;
+            check.CheckTime = item.CheckTime ?? DateTime.Now;
+            check.Remark = item.Remark;
+            db.SubmitChanges();
+
+            if (!string.IsNullOrWhiteSpace(item.AttachUrl))
+            {
+                UploadFileService.SaveAttachUrl(UploadFileService.GetSourceByAttachUrl(item.AttachUrl, 10, null),
+                    item.AttachUrl, Const.HJGL_WeldAppearanceCheckMenuId, id);
+            }
+            return id;
+        }
+
+        /// <summary>
+        /// 删除焊缝外观检测记录及其附件。
+        /// </summary>
+        /// <param name="appearanceCheckId">外观检测记录ID。</param>
+        public static void Delete(string appearanceCheckId)
+        {
+            var db = Funs.DB;
+            var check = db.HJGL_WeldAppearanceCheck.FirstOrDefault(x => x.AppearanceCheckId == appearanceCheckId);
+            if (check == null)
+            {
+                return;
+            }
+            db.HJGL_WeldAppearanceCheck.DeleteOnSubmit(check);
+            db.SubmitChanges();
+            CommonService.DeleteAttachFileById(Const.HJGL_WeldAppearanceCheckMenuId, appearanceCheckId);
+        }
+
+        /// <summary>
+        /// 查询指定焊口的历史外观检测记录。
+        /// </summary>
+        /// <param name="weldJointId">焊口ID。</param>
+        /// <returns>按检测时间倒序排列的历史记录。</returns>
+        private static List<Model.WeldAppearanceCheckItem> GetHistory(string weldJointId)
+        {
+            var data = GetHistoryQuery().Where(x => x.WeldJointId == weldJointId)
+                .OrderByDescending(x => x.CheckTime).ThenByDescending(x => x.CreateTime).ToList();
+            PopulateAttachUrls(data);
+            return data;
+        }
+
+        /// <summary>
+        /// 构建焊缝外观检测记录查询。
+        /// </summary>
+        /// <returns>焊缝外观检测记录查询对象。</returns>
+        private static IQueryable<Model.WeldAppearanceCheckItem> GetHistoryQuery()
+        {
+            var db = Funs.DB;
+            return from c in db.HJGL_WeldAppearanceCheck
+                   join w in db.HJGL_WeldJoint on c.WeldJointId equals w.WeldJointId
+                   join p in db.Person_Persons on c.CheckPerson equals p.PersonId into persons
+                   from p in persons.DefaultIfEmpty()
+                   select new Model.WeldAppearanceCheckItem
+                   {
+                       AppearanceCheckId = c.AppearanceCheckId,
+                       ProjectId = c.ProjectId,
+                       WeldJointId = c.WeldJointId,
+                       PipelineCode = w.PipelineCode,
+                       WeldJointCode = w.WeldJointCode,
+                       IsQualified = c.IsQualified,
+                       QualifiedText = c.IsQualified ? "合格" : "不合格",
+                       CheckPerson = c.CheckPerson,
+                       CheckPersonName = p == null ? string.Empty : p.PersonName,
+                       CheckTime = c.CheckTime,
+                       Remark = c.Remark,
+                       CreateTime = c.CreateTime
+                   };
+        }
+
+        /// <summary>
+        /// 为外观检测记录补充附件地址。
+        /// </summary>
+        /// <param name="data">外观检测记录。</param>
+        private static void PopulateAttachUrls(IList<Model.WeldAppearanceCheckItem> data)
+        {
+            foreach (var item in data)
+            {
+                item.AttachUrl = GetAttachUrl(item.AppearanceCheckId);
+            }
+        }
+
+        /// <summary>
+        /// 查询外观检测记录的附件地址。
+        /// </summary>
+        /// <param name="id">外观检测记录ID。</param>
+        /// <returns>附件地址。</returns>
+        private static string GetAttachUrl(string id)
+        {
+            var db = Funs.DB;
+            var url = db.AttachFile.Where(x => x.MenuId == Const.HJGL_WeldAppearanceCheckMenuId && x.ToKeyId == id)
+                .Select(x => x.AttachUrl).FirstOrDefault();
+            return string.IsNullOrEmpty(url) ? url : url.Replace('\\', '/');
+        }
+    }
+}
@@ -478,6 +478,15 @@ namespace BLL
        /// <param name="welderType">焊工类型 0 全部 1 打底 2 盖面</param>
        /// <returns>错误信息</returns>
        public static string SaveWeldingDailyTempDetailByMobile(string weldJointId, string personId, string time, string weldingLocationId, int welderType)
+        {
+            return SaveWeldingDailyTempDetailByMobile(weldJointId, personId, time, weldingLocationId, welderType, null, null);
+        }
+
+        /// <summary>
+        /// 移动端按焊口保存焊接日报待审核明细，并按需同步焊接方法和焊缝类型。
+        /// </summary>
+        public static string SaveWeldingDailyTempDetailByMobile(string weldJointId, string personId, string time,
+            string weldingLocationId, int welderType, string weldingMethodId, string weldTypeId)
        {
            string res = string.Empty;
            using (Model.SGGLDB db = new Model.SGGLDB(Funs.ConnString))
@@ -506,6 +515,13 @@ namespace BLL

                    var weldTask = db.HJGL_WeldTask.FirstOrDefault(x => x.WeldJointId == joint.WeldJointId);
                    var weldJoint = db.HJGL_WeldJoint.FirstOrDefault(x => x.WeldJointId == joint.WeldJointId);
+
+                    // 兼容旧版小程序：只有两个参数同时存在时才成对更新，避免焊口工艺信息出现半更新。
+                    if (!string.IsNullOrWhiteSpace(weldingMethodId) && !string.IsNullOrWhiteSpace(weldTypeId))
+                    {
+                        weldJoint.WeldingMethodId = weldingMethodId;
+                        weldJoint.WeldTypeId = weldTypeId;
+                    }
                    var pending = GetPendingTempDetail(db, weldJointId, weldingDate);

                    string coverWelderId = pending != null ? pending.CoverWelderId : weldJoint.CoverWelderId;
@@ -90,6 +90,9 @@
                        <f:RenderField Width="90px" ColumnID="RealNum" DataField="RealNum" SortField="RealNum"
                            FieldType="String" HeaderText="到货量" TextAlign="Left" HeaderTextAlign="Center">
                        </f:RenderField>
+                        <f:RenderField Width="90px" ColumnID="OutputNum" DataField="OutputNum" SortField="OutputNum"
+                            FieldType="String" HeaderText="出库量" TextAlign="Left" HeaderTextAlign="Center">
+                        </f:RenderField>
                        <f:RenderField Width="90px" ColumnID="StockNum" DataField="StockNum" SortField="StockNum"
                            FieldType="String" HeaderText="库存量" TextAlign="Left" HeaderTextAlign="Center">
                        </f:RenderField>
@@ -57,7 +57,7 @@
                                                <f:ToolbarFill runat="server"></f:ToolbarFill>
                                                <f:Button ID="btnSearch" ToolTip="查询" Icon="SystemSearch" runat="server" Text="查询" OnClick="btnSearch_Click">
                                                </f:Button>
-                                                <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="导出" ToolTip="导出" Icon="FolderUp"
+                                                <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="入库明细导出" ToolTip="导出选中入库单的全部明细" Icon="FolderUp"
                                                    EnableAjax="false" DisableControlBeforePostBack="false">
                                                </f:Button>
                                            </Items>
@@ -266,8 +266,12 @@ namespace FineUIPro.Web.CLGL
        /// <param name="e"></param>
        protected void btnOut_Click(object sender, EventArgs e)
        {
-            if (Grid1.SelectedRowIDArray.Length > 0)
+            if (Grid1.SelectedRowIDArray.Length == 0)
            {
+                Alert.ShowInTop("请至少选择一张入库单", MessageBoxIcon.Warning);
+                return;
+            }
+
            var printModel = TwInputdetailService.GePrintListByInputMasterIds(Grid1.SelectedRowIDArray.ToList());
            string path = Funs.RootPath + @"File\Excel\Temp\InputDetail.xlsx";
            path = path.Replace(".xlsx", string.Format("{0:yyyy-MM-dd-HH-mm}", DateTime.Now) + ".xlsx");
@@ -286,7 +290,6 @@ namespace FineUIPro.Web.CLGL
            System.Web.HttpContext.Current.Response.Close();
            File.Delete(path);
        }
-        }

        /// <summary>
        /// 导出方法
@@ -226,7 +226,6 @@ namespace FineUIPro.Web.CLGL
            Response.AddHeader("content-disposition", "attachment; filename=" + System.Web.HttpUtility.UrlEncode("材料库存表" + filename, System.Text.Encoding.UTF8) + ".xls");
            Response.ContentType = "application/excel";
            Response.ContentEncoding = System.Text.Encoding.UTF8; 
-            this.Grid1.PageSize = 500;
            this.BindGrid();
            Response.Write(GetGridTableHtml(Grid1));
            Response.End();
@@ -87,7 +87,7 @@
                                        </f:Button>
                                        <f:Button ID="btnGenOutPlanMaster" Text="生成补料申请单" Icon="ArrowRefresh" runat="server" OnClick="btnGenOutPlanMaster_Click" Hidden="true">
                                        </f:Button> 
-                                        <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="导出" ToolTip="导出" Icon="FolderUp"
+                                        <f:Button ID="btnOut" OnClick="btnOut_Click" runat="server" Text="出库明细导出" ToolTip="导出选中出库单的全部明细" Icon="FolderUp"
                                                  EnableAjax="false" DisableControlBeforePostBack="false">
                                        </f:Button>
                                    </Items>
@@ -97,6 +97,7 @@
                                <f:Grid ID="Grid1" ShowBorder="true" ShowHeader="false" Title="申请单"
                                    EnableCollapse="true" runat="server" BoxFlex="1" DataKeyNames="Id" PageSize="1000"
                                    AllowColumnLocking="true" EnableColumnLines="true" ClicksToEdit="2" DataIDField="Id"
+                                    EnableCheckBoxSelect="true"
                                    AllowSorting="true" SortField="CusBillCode" SortDirection="ASC" OnSort="Grid1_Sort" OnRowCommand="Grid1_RowCommand"
                                    EnableTextSelection="True" EnableRowDoubleClickEvent="true" OnRowDoubleClick="Grid1_RowDoubleClick" EnableRowClickEvent="true" OnRowClick="Grid1_RowClick">
                                    <Columns>
@@ -672,17 +672,17 @@ namespace FineUIPro.Web.CLGL

        protected void btnOut_Click(object sender, EventArgs e)
        {
-            if (Grid1.SelectedRowIDArray.Length > 0)
+            if (Grid1.SelectedRowIDArray.Length == 0)
            {
-                var sheets = new Dictionary<string, object>
-                {
-                    ["出库明细"] = TwOutputdetailService.GetPrintListByOutputMasterIds(Grid1.SelectedRowIDArray.ToList()),
-                    ["管线材料明细"] = TwInoutplandetailRelationService.GetPrintListByOutputMasterIds(Grid1.SelectedRowIDArray.ToList())
-                };
+                Alert.ShowInTop("请至少选择一张出库单", MessageBoxIcon.Warning);
+                return;
+            }
+
+            var printModel = TwOutputdetailService.GetPrintListByOutputMasterIds(Grid1.SelectedRowIDArray.ToList());
            string path = Funs.RootPath + @"File\Excel\Temp\OutputDetail.xlsx";
            path = path.Replace(".xlsx", string.Format("{0:yyyy-MM-dd-HH-mm}", DateTime.Now) + ".xlsx");

-                MiniExcel.SaveAs(path, sheets);
+            MiniExcel.SaveAs(path, printModel);

            string fileName = "出库明细表.xlsx";
            FileInfo info = new FileInfo(path);
@@ -698,4 +698,3 @@ namespace FineUIPro.Web.CLGL
        }
    }
 }
-}
@@ -1727,6 +1727,8 @@
    <Content Include="HJGL\WeldingManage\WeldMatMatch.aspx" />
    <Content Include="HJGL\WeldingManage\WeldMatMatchGet.aspx" />
    <Content Include="HJGL\WeldingManage\WeldReport.aspx" />
+    <Content Include="HJGL\WeldingManage\WeldAppearanceCheck.aspx" />
+    <Content Include="HJGL\WeldingManage\WeldAppearanceCheckEdit.aspx" />
    <Content Include="HJGL\WeldingManage\WeldReportEdit.aspx" />
    <Content Include="HJGL\WeldingManage\WeldTask.aspx" />
    <Content Include="HJGL\WeldingReport\CheckResult.aspx" />
@@ -11726,6 +11728,20 @@
      <DependentUpon>WeldReport.aspx</DependentUpon>
      <SubType>ASPXCodeBehind</SubType>
    </Compile>
+    <Compile Include="HJGL\WeldingManage\WeldAppearanceCheck.aspx.cs">
+      <DependentUpon>WeldAppearanceCheck.aspx</DependentUpon>
+      <SubType>ASPXCodeBehind</SubType>
+    </Compile>
+    <Compile Include="HJGL\WeldingManage\WeldAppearanceCheck.aspx.designer.cs">
+      <DependentUpon>WeldAppearanceCheck.aspx</DependentUpon>
+    </Compile>
+    <Compile Include="HJGL\WeldingManage\WeldAppearanceCheckEdit.aspx.cs">
+      <DependentUpon>WeldAppearanceCheckEdit.aspx</DependentUpon>
+      <SubType>ASPXCodeBehind</SubType>
+    </Compile>
+    <Compile Include="HJGL\WeldingManage\WeldAppearanceCheckEdit.aspx.designer.cs">
+      <DependentUpon>WeldAppearanceCheckEdit.aspx</DependentUpon>
+    </Compile>
    <Compile Include="HJGL\WeldingManage\WeldReport.aspx.designer.cs">
      <DependentUpon>WeldReport.aspx</DependentUpon>
    </Compile>
@@ -7,6 +7,9 @@
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>材料信息</title>
    <link href="../../res/css/common.css" rel="stylesheet" type="text/css" />
+    <style type="text/css">
+        .f-grid-row.batch-changed-review, .f-grid-row.batch-changed-review a { background-color: #ffe0e0 !important; color: #c00000 !important; }
+    </style>
 </head>
 <body>
    <form id="form1" runat="server">
@@ -105,7 +108,7 @@
                                                    EnableCollapse="true" runat="server" BoxFlex="1" DataKeyNames="PipeLineMatId"
                                                    EnableColumnLines="true" DataIDField="PipeLineMatId" AllowSorting="true" EnableCheckBoxSelect="true"
                                                    SortField="PrefabricatedComponents" SortDirection="ASC" OnSort="Grid1_Sort"
-                                                    EnableRowDoubleClickEvent="true" OnRowDoubleClick="Grid1_RowDoubleClick">
+                                                    EnableRowDoubleClickEvent="true" OnRowDoubleClick="Grid1_RowDoubleClick" OnRowDataBound="MaterialGrid_RowDataBound">
                                                    <Columns>
                                                        <f:RowNumberField EnablePagingNumber="true" HeaderText="序号"
                                                            Width="60px" HeaderTextAlign="Center" TextAlign="Center" />
@@ -175,7 +178,7 @@
                                                    EnableCollapse="true" runat="server" BoxFlex="1" DataKeyNames="PipeLineMatId"
                                                    EnableColumnLines="true" DataIDField="PipeLineMatId" AllowSorting="true"
                                                    SortField="PipeLineMatId" SortDirection="ASC" OnSort="Grid2_Sort" EnableCheckBoxSelect="true"
-                                                    EnableRowDoubleClickEvent="true" OnRowDoubleClick="Grid2_RowDoubleClick">
+                                                    EnableRowDoubleClickEvent="true" OnRowDoubleClick="Grid2_RowDoubleClick" OnRowDataBound="MaterialGrid_RowDataBound">
                                                    <Columns>
                                                        <f:RowNumberField EnablePagingNumber="true" HeaderText="序号"
                                                            Width="60px" HeaderTextAlign="Center" TextAlign="Center" />
@@ -238,7 +241,7 @@
                                                <f:Grid ID="Grid3" ShowBorder="true" ShowHeader="false" Title="散件管理"
                                                    EnableCollapse="true" runat="server" BoxFlex="1" DataKeyNames="PipeLineMatId"
                                                    EnableColumnLines="true" DataIDField="PipeLineMatId" AllowSorting="true"
-                                                    SortField="PipeLineMatId" SortDirection="ASC"  OnSort="Grid3_Sort" EnableCheckBoxSelect="true"
+                                                    SortField="PipeLineMatId" SortDirection="ASC"  OnSort="Grid3_Sort" EnableCheckBoxSelect="true" OnRowDataBound="MaterialGrid_RowDataBound"
                                                    EnableRowDoubleClickEvent="true"  >
                                                    <Columns>
                                                        <f:RowNumberField EnablePagingNumber="true" HeaderText="序号"
@@ -329,12 +329,19 @@ namespace FineUIPro.Web.HJGL.DataImport
                                       ISNULL(lib.MaterialDef, libCode.MaterialDef) AS MaterialDef,
                                       pipe.Number,pipe.PrefabricatedComponents,
                                       CASE pipe.PipeArea WHEN '1' THEN N'工厂预制' WHEN '2' THEN N'现场安装' END AS PipeAreaText,
-                                       weld.WeldJointCode
+                                       weld.WeldJointCode, ISNULL(reviewChange.HasChange, 0) AS HasReviewedBatchChange
                                  FROM dbo.HJGL_PipeLineMat pipe
                                  LEFT JOIN dbo.HJGL_MaterialCodeLib lib ON lib.MaterialCode = pipe.MaterialCode
 								  LEFT JOIN HJGL_Pipeline line ON pipe.PipelineId=line.PipelineId
                                  OUTER APPLY (SELECT TOP 1 * FROM dbo.HJGL_MaterialCodeLib codeLib WHERE codeLib.ProjectId=line.ProjectId AND codeLib.Code=pipe.MaterialCode2 ORDER BY codeLib.MaterialCode) libCode
                                  LEFT JOIN dbo.HJGL_WeldJoint weld ON weld.WeldJointId = pipe.WeldJointId
+                                  OUTER APPLY (
+                                      SELECT TOP 1 CAST(CASE WHEN ISNULL(s.ReportedMainCode,'') <> ISNULL(pipe.MaterialCode,'') THEN 1 ELSE 0 END AS BIT) HasChange
+                                      FROM dbo.HJGL_PreWeldCuttingCheckMaterial s
+                                      INNER JOIN dbo.HJGL_PreWeldCuttingCheck c ON c.CuttingCheckId=s.CuttingCheckId
+                                      WHERE s.PipeLineMatId=pipe.PipeLineMatId AND c.ReviewState=2
+                                      ORDER BY c.ReviewTime DESC, c.CheckTime DESC, c.CuttingCheckId DESC
+                                  ) reviewChange
                                  WHERE line.UnitWorkId=@UnitWorkId  and pipe.PipeArea='1'  and pipe.PrefabricatedComponents !='' ";
            List<SqlParameter> listStr = new List<SqlParameter>();
            //if (!string.IsNullOrEmpty(txtMaterialCode.Text.Trim()))
@@ -373,12 +380,19 @@ namespace FineUIPro.Web.HJGL.DataImport
                                       ISNULL(lib.MaterialDef, libCode.MaterialDef) AS MaterialDef,
                                       pipe.Number,
                                       CASE pipe.PipeArea WHEN '1' THEN N'工厂预制' WHEN '2' THEN N'现场安装' END AS PipeAreaText,
-                                       weld.WeldJointCode
+                                       weld.WeldJointCode, ISNULL(reviewChange.HasChange, 0) AS HasReviewedBatchChange
                                  FROM dbo.HJGL_PipeLineMat pipe
                                  LEFT JOIN dbo.HJGL_MaterialCodeLib lib ON lib.MaterialCode = pipe.MaterialCode
 								  LEFT JOIN HJGL_Pipeline line ON pipe.PipelineId=line.PipelineId
                                  OUTER APPLY (SELECT TOP 1 * FROM dbo.HJGL_MaterialCodeLib codeLib WHERE codeLib.ProjectId=line.ProjectId AND codeLib.Code=pipe.MaterialCode2 ORDER BY codeLib.MaterialCode) libCode
                                  LEFT JOIN dbo.HJGL_WeldJoint weld ON weld.WeldJointId = pipe.WeldJointId
+                                  OUTER APPLY (
+                                      SELECT TOP 1 CAST(CASE WHEN ISNULL(s.ReportedMainCode,'') <> ISNULL(pipe.MaterialCode,'') THEN 1 ELSE 0 END AS BIT) HasChange
+                                      FROM dbo.HJGL_PreWeldCuttingCheckMaterial s
+                                      INNER JOIN dbo.HJGL_PreWeldCuttingCheck c ON c.CuttingCheckId=s.CuttingCheckId
+                                      WHERE s.PipeLineMatId=pipe.PipeLineMatId AND c.ReviewState=2
+                                      ORDER BY c.ReviewTime DESC, c.CheckTime DESC, c.CuttingCheckId DESC
+                                  ) reviewChange
                                  WHERE line.UnitWorkId=@UnitWorkId  and pipe.PipeArea='2'  ";
            List<SqlParameter> listStr = new List<SqlParameter>();
            if (!string.IsNullOrEmpty(pipelineId))
@@ -413,12 +427,19 @@ namespace FineUIPro.Web.HJGL.DataImport
                                       ISNULL(lib.MaterialDef, libCode.MaterialDef) AS MaterialDef,
                                       pipe.Number,pipe.PrefabricatedComponents,
                                       CASE pipe.PipeArea WHEN '1' THEN N'工厂预制' WHEN '2' THEN N'现场安装' END AS PipeAreaText,
-                                       weld.WeldJointCode
+                                       weld.WeldJointCode, ISNULL(reviewChange.HasChange, 0) AS HasReviewedBatchChange
                                  FROM dbo.HJGL_PipeLineMat pipe
                                  LEFT JOIN dbo.HJGL_MaterialCodeLib lib ON lib.MaterialCode = pipe.MaterialCode
 								  LEFT JOIN HJGL_Pipeline line ON pipe.PipelineId=line.PipelineId
                                  OUTER APPLY (SELECT TOP 1 * FROM dbo.HJGL_MaterialCodeLib codeLib WHERE codeLib.ProjectId=line.ProjectId AND codeLib.Code=pipe.MaterialCode2 ORDER BY codeLib.MaterialCode) libCode
                                  LEFT JOIN dbo.HJGL_WeldJoint weld ON weld.WeldJointId = pipe.WeldJointId
+                                  OUTER APPLY (
+                                      SELECT TOP 1 CAST(CASE WHEN ISNULL(s.ReportedMainCode,'') <> ISNULL(pipe.MaterialCode,'') THEN 1 ELSE 0 END AS BIT) HasChange
+                                      FROM dbo.HJGL_PreWeldCuttingCheckMaterial s
+                                      INNER JOIN dbo.HJGL_PreWeldCuttingCheck c ON c.CuttingCheckId=s.CuttingCheckId
+                                      WHERE s.PipeLineMatId=pipe.PipeLineMatId AND c.ReviewState=2
+                                      ORDER BY c.ReviewTime DESC, c.CheckTime DESC, c.CuttingCheckId DESC
+                                  ) reviewChange
                                  WHERE line.UnitWorkId=@UnitWorkId  and pipe.PipeArea='1'  and (pipe.PrefabricatedComponents is null or pipe.PrefabricatedComponents='') ";
            List<SqlParameter> listStr = new List<SqlParameter>();
            //if (!string.IsNullOrEmpty(txtMaterialCode.Text.Trim()))
@@ -450,6 +471,19 @@ namespace FineUIPro.Web.HJGL.DataImport

        #endregion

+        /// <summary>
+        /// 最新专项审核反馈主编码与当前材料主编码不一致时整行标红。
+        /// </summary>
+        protected void MaterialGrid_RowDataBound(object sender, GridRowEventArgs e)
+        {
+            var row = e.DataItem as DataRowView;
+            if (row != null && row.Row.Table.Columns.Contains("HasReviewedBatchChange")
+                && Convert.ToBoolean(row["HasReviewedBatchChange"]))
+            {
+                e.RowCssClass = "batch-changed-review";
+            }
+        }
+
        #region 分页排序

        #region 排序
@@ -112,6 +112,9 @@
                                         <f:RenderField HeaderText="完成状态" ColumnID="IsWeldOK" DataField="IsWeldOK"
                                            SortField="IsWeldOK" FieldType="String" HeaderTextAlign="Center" Width="100px">
                                        </f:RenderField>
+                                        <f:RenderField HeaderText="焊缝是否合格" ColumnID="WeldAppearanceResult" DataField="WeldAppearanceResult"
+                                            SortField="WeldAppearanceResult" FieldType="String" HeaderTextAlign="Center" Width="120px">
+                                        </f:RenderField>
                                        <f:RenderField HeaderText="单位名称" ColumnID="UnitName" DataField="UnitName"
                                            SortField="UnitName" FieldType="String" HeaderTextAlign="Center" Width="180px">
                                        </f:RenderField>
@@ -626,6 +626,7 @@ namespace FineUIPro.Web.HJGL.InfoQuery
                         管线号 = x.PipelineCode,
                         焊口号 = x.WeldJointCode,
                         完成状态 = x.IsWeldOK,
+                         焊缝是否合格 = x.WeldAppearanceResult,
                         单位名称 = x.UnitName,
                         流水段 = x.FlowingSection,
                         任务单编号 = x.TaskCode,
@@ -709,6 +710,7 @@ namespace FineUIPro.Web.HJGL.InfoQuery
                    {
                        焊口号 = x.WeldJointCode,
                        完成状态 = x.IsWeldOK,
+                        焊缝是否合格 = x.WeldAppearanceResult,
                        单位名称 = x.UnitName,
                        流水段 = x.FlowingSection,
                        任务单编号 = x.TaskCode, 
@@ -43,7 +43,7 @@
                            </f:FormRow>
                             <f:FormRow>
                                <Items>
-                                    <f:TextBox ID="txtPipelineComponentCode" Label="组件编号" ShowRedStar="true" Readonly="true"
+                                    <f:TextBox ID="txtPipelineComponentCode" Label="组件编号" ShowRedStar="true"  
                                        Required="true" runat="server" FocusOnPageLoad="true" LabelWidth="120px">
                                    </f:TextBox>
                                </Items>
@@ -68,6 +68,12 @@
                    <f:RenderField Width="120px" ColumnID="CheckResult" DataField="CheckResult" FieldType="String"
                        HeaderText="检查结果" HeaderTextAlign="Center" TextAlign="Center">
                    </f:RenderField>
+                    <f:RenderField Width="140px" ColumnID="ReviewStateText" DataField="ReviewStateText" FieldType="String"
+                        HeaderText="专项审核状态" HeaderTextAlign="Center" TextAlign="Center">
+                    </f:RenderField>
+                    <f:RenderField Width="120px" ColumnID="SpecialReviewerName" DataField="SpecialReviewerName" FieldType="String"
+                        HeaderText="专项审核办理人" HeaderTextAlign="Center" TextAlign="Center">
+                    </f:RenderField>
                    <f:RenderField Width="180px" ColumnID="CreateTime" DataField="CreateTime" FieldType="Date"
                        RendererArgument="yyyy-MM-dd HH:mm" HeaderText="创建时间" HeaderTextAlign="Center" TextAlign="Center">
                    </f:RenderField>
@@ -52,6 +52,18 @@
                    </f:CheckBox>
                </Items>
            </f:FormRow>
+            <f:FormRow>
+                <Items>
+                    <f:DropDownList ID="ddlSpecialReviewer" runat="server" Label="专项审核办理人" LabelWidth="170px" EnableEdit="true">
+                    </f:DropDownList>
+                </Items>
+            </f:FormRow>
+            <f:FormRow>
+                <Items>
+                    <f:TextArea ID="txtMaterialFeedback" runat="server" Label="两侧主编码反馈" LabelWidth="170px" Enabled="false">
+                    </f:TextArea>
+                </Items>
+            </f:FormRow>
            <f:FormRow>
                <Items>
                    <f:DropDownList ID="ddlCheckResult" runat="server" Label="检查结果" LabelWidth="170px" Required="true"
@@ -107,6 +119,8 @@
                    <f:Button ID="btnSave" Text="保存" Icon="SystemSave" runat="server" ValidateForms="SimpleForm1"
                        OnClick="btnSave_Click">
                    </f:Button>
+                    <f:Button ID="btnReview" Text="审核" Icon="SystemSave" runat="server" Hidden="true" OnClick="btnReview_Click">
+                    </f:Button>
                    <f:Button ID="btnClose" EnablePostBack="false" Text="关闭" runat="server" Icon="SystemClose">
                    </f:Button>
                </Items>
@@ -20,10 +20,12 @@ namespace FineUIPro.Web.HJGL.PreWeld
                CuttingCheckId = Request.Params["CuttingCheckId"];
                BindWeldJoint();
                BindCheckPerson();
+                BindSpecialReviewer();
                ddlCheckResult.SelectedValue = "合格";
                if (!string.IsNullOrEmpty(CuttingCheckId))
                {
                    BindData();
+                    btnReview.Hidden = Request.Params["review"] != "1";
                }
                else
                {
@@ -57,6 +59,14 @@ namespace FineUIPro.Web.HJGL.PreWeld
            Person_PersonsService.InitUserProjectIdUnitIdRoleIdDropDownList(drpCheckPerson, CurrUser.LoginProjectId, null, null, true);
        }

+        private void BindSpecialReviewer()
+        {
+            ddlSpecialReviewer.DataTextField = "BaseInfoName";
+            ddlSpecialReviewer.DataValueField = "BaseInfoId";
+            ddlSpecialReviewer.DataSource = APIPreWeldInspectionService.GetSpecialReviewers(CurrUser.LoginProjectId);
+            ddlSpecialReviewer.DataBind();
+        }
+
        private void BindData()
        {
            var model = PreWeldInspectionService.GetCuttingCheckById(CuttingCheckId);
@@ -83,6 +93,17 @@ namespace FineUIPro.Web.HJGL.PreWeld
            txtUnqualifiedReason.Text = model.UnqualifiedReason;
            txtRectifyRequirement.Text = model.RectifyRequirement;
            txtRemark.Text = model.Remark;
+            if (!string.IsNullOrEmpty(model.SpecialReviewerId))
+            {
+                ddlSpecialReviewer.SelectedValue = model.SpecialReviewerId;
+            }
+            var detail = PreWeldInspectionService.GetCuttingCheckItemsByWeldJointId(model.WeldJointId)
+                .FirstOrDefault(x => x.CuttingCheckId == CuttingCheckId);
+            if (detail != null && detail.Materials != null)
+            {
+                txtMaterialFeedback.Text = string.Join("\r\n", detail.Materials.Select(x => string.Format(
+                    "第{0}侧：{1} → {2}", x.MaterialSide, x.OriginalMainCode, x.ReportedMainCode)));
+            }
        }

        protected void btnSave_Click(object sender, EventArgs e)
@@ -109,7 +130,8 @@ namespace FineUIPro.Web.HJGL.PreWeld
                CreateUser = CurrUser.PersonId,
                UnqualifiedReason = txtUnqualifiedReason.Text.Trim(),
                RectifyRequirement = txtRectifyRequirement.Text.Trim(),
-                Remark = txtRemark.Text.Trim()
+                Remark = txtRemark.Text.Trim(),
+                SpecialReviewerId = ddlSpecialReviewer.SelectedValue
            };

            CuttingCheckId = APIPreWeldInspectionService.SaveCuttingCheck(item);
@@ -117,6 +139,19 @@ namespace FineUIPro.Web.HJGL.PreWeld
            PageContext.RegisterStartupScript(ActiveWindow.GetHideRefreshReference());
        }

+        protected void btnReview_Click(object sender, EventArgs e)
+        {
+            APIPreWeldInspectionService.ReviewCuttingCheck(new Model.PreWeldCuttingCheckReviewInput
+            {
+                CuttingCheckId = CuttingCheckId,
+                ReviewerId = CurrUser.PersonId,
+                ReviewTime = DateTime.Now,
+                Remark = txtRemark.Text.Trim()
+            });
+            ShowNotify("专项审核已完成！", MessageBoxIcon.Success);
+            PageContext.RegisterStartupScript(ActiveWindow.GetHideRefreshReference());
+        }
+
        protected void btnAttachUrl_Click(object sender, EventArgs e)
        {
            if (string.IsNullOrEmpty(CuttingCheckId))
@@ -95,6 +95,10 @@ namespace FineUIPro.Web.HJGL.PreWeld
        /// </remarks>
        protected global::FineUIPro.CheckBox chkMaterialQuantity;

+        protected global::FineUIPro.DropDownList ddlSpecialReviewer;
+
+        protected global::FineUIPro.TextArea txtMaterialFeedback;
+
        /// <summary>
        /// ddlCheckResult 控件。
        /// </summary>
@@ -176,6 +180,8 @@ namespace FineUIPro.Web.HJGL.PreWeld
        /// </remarks>
        protected global::FineUIPro.Button btnSave;

+        protected global::FineUIPro.Button btnReview;
+
        /// <summary>
        /// btnClose 控件。
        /// </summary>
@@ -523,7 +523,7 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                                        && x.PipelineId == item.PipelineId
                                        && x.PrefabricatedComponents == item.PrefabricatedComponents
                                        && x.PipeArea == item.PipeArea
-                                        && (string.IsNullOrEmpty(item.MaterialCode) || x.MaterialCode == item.MaterialCode)
+                                      //  && (string.IsNullOrEmpty(item.MaterialCode) || x.MaterialCode == item.MaterialCode)
                                  select x;
                if (pipeLineMat.Count() == 0 || pipeLineMat == null)
                {
@@ -533,12 +533,13 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                else
                {
                    var oldPipeLineMat = pipeLineMat.First();
-                    item.PipeLineMatId = oldPipeLineMat.PipeLineMatId;
-                    if (string.IsNullOrEmpty(item.MaterialCode))
+                    oldPipeLineMat.Number=item.Number;
+                    oldPipeLineMat.MaterialCode2 = item.MaterialCode2; 
+                    if (!string.IsNullOrEmpty(item.MaterialCode))
                    {
-                        item.MaterialCode = oldPipeLineMat.MaterialCode;
+                       oldPipeLineMat.MaterialCode = item.MaterialCode;
                    }
-                    BLL.PipelineMatService.UpdatePipeLineMat(item);
+                    BLL.PipelineMatService.UpdatePipeLineMat(oldPipeLineMat);
                }
                BLL.HJGL_PipelineComponentService.SyncPipelineComponentByMatId(item.PipeLineMatId);
            }
@@ -0,0 +1,106 @@
+<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WeldAppearanceCheck.aspx.cs" Inherits="FineUIPro.Web.HJGL.WeldingManage.WeldAppearanceCheck" %>
+
+<!DOCTYPE html>
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head runat="server">
+    <title>焊缝外观检测记录</title>
+    <link href="../../res/css/common.css" rel="stylesheet" type="text/css" />
+    <link href="../../res/css/viewer.min.css" rel="stylesheet" />
+    <script src="../../res/js/viewer.min.js" type="text/javascript"></script>
+    <style type="text/css">
+        .img {
+            cursor: zoom-in;
+            object-fit: cover;
+        }
+    </style>
+</head>
+<body>
+    <form id="form1" runat="server">
+        <f:PageManager ID="PageManager1" AutoSizePanelID="Panel1" runat="server" />
+        <f:Panel ID="Panel1" runat="server" Margin="5px" BodyPadding="5px" ShowBorder="false"
+            ShowHeader="false" Layout="VBox">
+            <Items>
+                <f:Grid ID="Grid1" runat="server" BoxFlex="1" ShowBorder="true" ShowHeader="false"
+                    EnableColumnLines="true" DataKeyNames="AppearanceCheckId" DataIDField="AppearanceCheckId"
+                    AllowPaging="true" IsDatabasePaging="true" PageSize="15"
+                    OnPageIndexChange="Grid1_PageIndexChange" EnableRowDoubleClickEvent="true"
+                    OnRowDoubleClick="Grid1_RowDoubleClick">
+                    <Toolbars>
+                        <f:Toolbar runat="server">
+                            <Items>
+                                <f:TextBox ID="txtPipelineCode" runat="server" Label="管线号" Width="250px"
+                                    LabelWidth="70px" />
+                                <f:TextBox ID="txtWeldJointCode" runat="server" Label="焊口号" Width="220px"
+                                    LabelWidth="70px" />
+                                <f:DropDownList ID="ddlQualified" runat="server" Label="是否合格" Width="190px"
+                                    LabelWidth="80px">
+                                    <f:ListItem Text="全部" Value="" />
+                                    <f:ListItem Text="合格" Value="1" />
+                                    <f:ListItem Text="不合格" Value="0" />
+                                </f:DropDownList>
+                                <f:Button ID="btnQuery" runat="server" Text="查询" Icon="SystemSearch"
+                                    OnClick="btnQuery_Click" />
+                                <f:ToolbarFill runat="server" />
+                                <f:Button ID="btnNew" runat="server" Text="新增" Icon="Add"
+                                    OnClick="btnNew_Click" />
+                                <f:Button ID="btnEdit" runat="server" Text="修改" Icon="Pencil"
+                                    OnClick="btnEdit_Click" />
+                                <f:Button ID="btnDelete" runat="server" Text="删除" Icon="Delete"
+                                    ConfirmText="确认删除选中的外观检测记录？" OnClick="btnDelete_Click" />
+                            </Items>
+                        </f:Toolbar>
+                    </Toolbars>
+                    <Columns>
+                        <f:RowNumberField Width="60px" HeaderText="序号" TextAlign="Center" />
+                        <f:RenderField Width="220px" DataField="PipelineCode" HeaderText="管线号" />
+                        <f:RenderField Width="130px" DataField="WeldJointCode" HeaderText="焊口号" />
+                        <f:RenderField Width="100px" DataField="QualifiedText" HeaderText="外观是否合格"
+                            TextAlign="Center" />
+                        <f:RenderField Width="120px" DataField="CheckPersonName" HeaderText="检测人"
+                            TextAlign="Center" />
+                        <f:RenderField Width="170px" DataField="CheckTime" FieldType="Date"
+                            RendererArgument="yyyy-MM-dd HH:mm" HeaderText="检测时间" TextAlign="Center" />
+                        <f:TemplateField ColumnID="AttachUrl" MinWidth="120px" HeaderText="照片"
+                            HeaderTextAlign="Center" TextAlign="Center">
+                            <ItemTemplate>
+                                <asp:Label ID="lbAttachUrl" runat="server"
+                                    Text='<%# ConvertImageUrlByImage(Eval("AttachUrl")) %>'></asp:Label>
+                            </ItemTemplate>
+                        </f:TemplateField>
+                        <f:RenderField Width="300px" DataField="Remark" HeaderText="备注" />
+                    </Columns>
+                </f:Grid>
+            </Items>
+        </f:Panel>
+        <f:Window ID="Window1" Title="焊缝外观检测" Hidden="true" EnableIFrame="true"
+            EnableMaximize="true" Target="Top" runat="server" OnClose="Window1_Close" IsModal="true"
+            Width="760px" Height="560px" />
+    </form>
+    <script type="text/javascript">
+        var gridImageSelector = '#<%= Grid1.ClientID %> img.img';
+
+        F.ready(function () {
+            $(document).off('click.weldappearance', gridImageSelector)
+                .on('click.weldappearance', gridImageSelector, function () {
+                    var imageUrl = $(this).attr('src');
+                    if (!imageUrl) {
+                        return;
+                    }
+
+                    var container = document.createElement('div');
+                    var image = document.createElement('img');
+                    container.style.display = 'none';
+                    image.src = imageUrl;
+                    container.appendChild(image);
+                    document.body.appendChild(container);
+
+                    var viewer = new Viewer(image);
+                    viewer.show();
+                    viewer.on('hidden', function () {
+                        document.body.removeChild(container);
+                    });
+                });
+        });
+    </script>
+</body>
+</html>
@@ -0,0 +1,85 @@
+using BLL;
+using System;
+using System.Web;
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+    public partial class WeldAppearanceCheck : PageBase
+    {
+        protected void Page_Load(object sender, EventArgs e)
+        {
+            if (!IsPostBack) BindGrid();
+        }
+
+        private void BindGrid()
+        {
+            var result = WeldAppearanceCheckService.GetList(CurrUser.LoginProjectId, txtPipelineCode.Text.Trim(),
+                txtWeldJointCode.Text.Trim(), ddlQualified.SelectedValue, Grid1.PageIndex, Grid1.PageSize);
+            Grid1.RecordCount = result.Item2;
+            Grid1.DataSource = result.Item1;
+            Grid1.DataBind();
+        }
+
+        protected void Grid1_PageIndexChange(object sender, GridPageEventArgs e) { Grid1.PageIndex = e.NewPageIndex; BindGrid(); }
+        protected void btnQuery_Click(object sender, EventArgs e) { Grid1.PageIndex = 0; BindGrid(); }
+        protected void Window1_Close(object sender, WindowCloseEventArgs e) { BindGrid(); }
+
+        /// <summary>
+        /// 将附件地址转换为列表缩略图。
+        /// </summary>
+        /// <param name="photoUrl">以逗号分隔的照片地址。</param>
+        /// <returns>照片缩略图HTML。</returns>
+        protected string ConvertImageUrlByImage(object photoUrl)
+        {
+            if (photoUrl == null || string.IsNullOrWhiteSpace(photoUrl.ToString()))
+            {
+                return string.Empty;
+            }
+
+            string html = "<table cellpadding='5' cellspacing='5' style=\"width: 100%\">";
+            foreach (string item in photoUrl.ToString().Split(new[] { "," }, StringSplitOptions.RemoveEmptyEntries))
+            {
+                string imageUrl = "../../" + item.Trim().Replace('\\', '/');
+                html += "<tr><td align='center'><img class='img' width='100' height='100' src='"
+                    + HttpUtility.HtmlAttributeEncode(imageUrl) + "' alt='外观检测照片' /></td></tr>";
+            }
+            return html + "</table>";
+        }
+
+        protected void btnNew_Click(object sender, EventArgs e)
+        {
+            if (HasPower(Const.BtnAdd)) PageContext.RegisterStartupScript(Window1.GetShowReference("WeldAppearanceCheckEdit.aspx"));
+        }
+
+        protected void btnEdit_Click(object sender, EventArgs e) { OpenSelectedRecord(); }
+        protected void Grid1_RowDoubleClick(object sender, GridRowClickEventArgs e) { OpenSelectedRecord(); }
+
+        protected void btnDelete_Click(object sender, EventArgs e)
+        {
+            if (!EnsureSelected() || !HasPower(Const.BtnDelete)) return;
+            WeldAppearanceCheckService.Delete(Grid1.SelectedRowID);
+            BindGrid();
+        }
+
+        private void OpenSelectedRecord()
+        {
+            if (!EnsureSelected() || !HasPower(Const.BtnModify)) return;
+            PageContext.RegisterStartupScript(Window1.GetShowReference("WeldAppearanceCheckEdit.aspx?AppearanceCheckId=" + Grid1.SelectedRowID));
+        }
+
+        private bool EnsureSelected()
+        {
+            if (Grid1.SelectedRowIndexArray.Length > 0) return true;
+            Alert.ShowInTop("请选择一条记录！", MessageBoxIcon.Warning);
+            return false;
+        }
+
+        private bool HasPower(string button)
+        {
+            bool hasPower = CommonService.GetAllButtonPowerList(CurrUser.LoginProjectId, CurrUser.PersonId,
+                Const.HJGL_WeldAppearanceCheckMenuId, button);
+            if (!hasPower) Alert.ShowInTop("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
+            return hasPower;
+        }
+    }
+}
@@ -0,0 +1,134 @@
+//------------------------------------------------------------------------------
+// <自动生成>
+//     此代码由工具生成。
+//
+//     对此文件的更改可能导致不正确的行为，如果
+//     重新生成代码，则所做更改将丢失。
+// </自动生成>
+//------------------------------------------------------------------------------
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+
+
+    public partial class WeldAppearanceCheck
+    {
+
+        /// <summary>
+        /// form1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::System.Web.UI.HtmlControls.HtmlForm form1;
+
+        /// <summary>
+        /// PageManager1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.PageManager PageManager1;
+
+        /// <summary>
+        /// Panel1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Panel Panel1;
+
+        /// <summary>
+        /// Grid1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Grid Grid1;
+
+        /// <summary>
+        /// txtPipelineCode 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtPipelineCode;
+
+        /// <summary>
+        /// txtWeldJointCode 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextBox txtWeldJointCode;
+
+        /// <summary>
+        /// ddlQualified 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlQualified;
+
+        /// <summary>
+        /// btnQuery 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnQuery;
+
+        /// <summary>
+        /// btnNew 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnNew;
+
+        /// <summary>
+        /// btnEdit 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnEdit;
+
+        /// <summary>
+        /// btnDelete 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnDelete;
+
+        /// <summary>
+        /// lbAttachUrl 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::System.Web.UI.WebControls.Label lbAttachUrl;
+
+        /// <summary>
+        /// Window1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Window Window1;
+    }
+}
@@ -0,0 +1,72 @@
+<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WeldAppearanceCheckEdit.aspx.cs" Inherits="FineUIPro.Web.HJGL.WeldingManage.WeldAppearanceCheckEdit" %>
+
+<!DOCTYPE html>
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head runat="server">
+    <title>编辑焊缝外观检测</title>
+    <base target="_self" />
+    <link href="../../res/css/common.css" rel="stylesheet" type="text/css" />
+</head>
+<body>
+    <form id="form1" runat="server">
+        <f:PageManager ID="PageManager1" AutoSizePanelID="SimpleForm1" runat="server" />
+        <f:Form ID="SimpleForm1" ShowBorder="false" ShowHeader="false" AutoScroll="true"
+            BodyPadding="10px" runat="server" RedStarPosition="BeforeText">
+            <Rows>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="ddlWeldJoint" runat="server" Label="已焊接焊口" Required="true"
+                            ShowRedStar="true" EnableEdit="true" LabelWidth="130px" />
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="ddlQualified" runat="server" Label="外观是否合格" Required="true"
+                            ShowRedStar="true" LabelWidth="130px">
+                            <f:ListItem Text="合格" Value="1" />
+                            <f:ListItem Text="不合格" Value="0" />
+                        </f:DropDownList>
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DropDownList ID="ddlCheckPerson" runat="server" Label="检测人" Required="true"
+                            ShowRedStar="true" EnableEdit="true" LabelWidth="130px" />
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:DatePicker ID="dpCheckTime" runat="server" Label="检测时间" Required="true"
+                            ShowRedStar="true" LabelWidth="130px" />
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:TextArea ID="txtRemark" runat="server" Label="备注" MaxLength="500"
+                            LabelWidth="130px" />
+                    </Items>
+                </f:FormRow>
+                <f:FormRow>
+                    <Items>
+                        <f:Button ID="btnAttach" runat="server" Text="上传/查看照片（必填）" Icon="TableCell"
+                            OnClick="btnAttach_Click" />
+                    </Items>
+                </f:FormRow>
+            </Rows>
+            <Toolbars>
+                <f:Toolbar runat="server" Position="Bottom" ToolbarAlign="Right">
+                    <Items>
+                        <f:Button ID="btnSave" runat="server" Text="保存" Icon="SystemSave"
+                            ValidateForms="SimpleForm1" OnClick="btnSave_Click" />
+                        <f:Button ID="btnClose" runat="server" Text="关闭" Icon="SystemClose"
+                            EnablePostBack="false" />
+                    </Items>
+                </f:Toolbar>
+            </Toolbars>
+        </f:Form>
+        <f:Window ID="WindowAtt" Title="外观检测照片" Hidden="true" EnableIFrame="true"
+            EnableMaximize="true" Target="Parent" runat="server" IsModal="true" Width="720px"
+            Height="440px" />
+    </form>
+</body>
+</html>
@@ -0,0 +1,85 @@
+using BLL;
+using System;
+using System.Linq;
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+    public partial class WeldAppearanceCheckEdit : PageBase
+    {
+        private string AppearanceCheckId
+        {
+            get { return (string)ViewState["AppearanceCheckId"]; }
+            set { ViewState["AppearanceCheckId"] = value; }
+        }
+
+        protected void Page_Load(object sender, EventArgs e)
+        {
+            if (IsPostBack) return;
+            btnClose.OnClientClick = ActiveWindow.GetHideReference();
+            AppearanceCheckId = Request.Params["AppearanceCheckId"] ?? Guid.NewGuid().ToString();
+            BindWeldJoints();
+            Person_PersonsService.InitUserProjectIdUnitIdRoleIdDropDownList(ddlCheckPerson, CurrUser.LoginProjectId, null, null, true);
+            var model = WeldAppearanceCheckService.GetById(AppearanceCheckId);
+            if (model == null)
+            {
+                ddlQualified.SelectedValue = "1";
+                ddlCheckPerson.SelectedValue = CurrUser.PersonId;
+                dpCheckTime.SelectedDate = DateTime.Now;
+                return;
+            }
+            ddlWeldJoint.SelectedValue = model.WeldJointId;
+            ddlQualified.SelectedValue = model.IsQualified ? "1" : "0";
+            ddlCheckPerson.SelectedValue = model.CheckPerson;
+            dpCheckTime.SelectedDate = model.CheckTime;
+            txtRemark.Text = model.Remark;
+        }
+
+        private void BindWeldJoints()
+        {
+            var data = WeldAppearanceCheckService.GetWeldedJoints(CurrUser.LoginProjectId, null, null, 0, 10000)
+                .Select(x => new { x.WeldJointId, Name = x.PipelineCode + " / " + x.WeldJointCode }).ToList();
+            ddlWeldJoint.DataTextField = "Name";
+            ddlWeldJoint.DataValueField = "WeldJointId";
+            ddlWeldJoint.DataSource = data;
+            ddlWeldJoint.DataBind();
+        }
+
+        protected void btnSave_Click(object sender, EventArgs e)
+        {
+            if (!CommonService.GetAllButtonPowerList(CurrUser.LoginProjectId, CurrUser.PersonId,
+                Const.HJGL_WeldAppearanceCheckMenuId, Const.BtnSave))
+            {
+                Alert.ShowInTop("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
+                return;
+            }
+
+            try
+            {
+                WeldAppearanceCheckService.Save(new Model.WeldAppearanceCheckInput
+                {
+                    AppearanceCheckId = AppearanceCheckId,
+                    ProjectId = CurrUser.LoginProjectId,
+                    WeldJointId = ddlWeldJoint.SelectedValue,
+                    IsQualified = ddlQualified.SelectedValue == "1",
+                    CheckPerson = ddlCheckPerson.SelectedValue,
+                    CheckTime = dpCheckTime.SelectedDate,
+                    Remark = txtRemark.Text.Trim(),
+                    CreateUser = CurrUser.PersonId
+                });
+                ShowNotify("保存成功！", MessageBoxIcon.Success);
+                PageContext.RegisterStartupScript(ActiveWindow.GetHideRefreshReference());
+            }
+            catch (Exception ex)
+            {
+                Alert.ShowInTop(ex.Message, MessageBoxIcon.Warning);
+            }
+        }
+
+        protected void btnAttach_Click(object sender, EventArgs e)
+        {
+            PageContext.RegisterStartupScript(WindowAtt.GetShowReference(string.Format(
+                "../../AttachFile/webuploader.aspx?toKeyId={0}&path=FileUpload/HJGL/WeldingManage/WeldAppearanceCheck&menuId={1}&edit=1",
+                AppearanceCheckId, Const.HJGL_WeldAppearanceCheckMenuId)));
+        }
+    }
+}
@@ -0,0 +1,125 @@
+//------------------------------------------------------------------------------
+// <自动生成>
+//     此代码由工具生成。
+//
+//     对此文件的更改可能导致不正确的行为，如果
+//     重新生成代码，则所做更改将丢失。
+// </自动生成>
+//------------------------------------------------------------------------------
+
+namespace FineUIPro.Web.HJGL.WeldingManage
+{
+
+
+    public partial class WeldAppearanceCheckEdit
+    {
+
+        /// <summary>
+        /// form1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::System.Web.UI.HtmlControls.HtmlForm form1;
+
+        /// <summary>
+        /// PageManager1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.PageManager PageManager1;
+
+        /// <summary>
+        /// SimpleForm1 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Form SimpleForm1;
+
+        /// <summary>
+        /// ddlWeldJoint 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlWeldJoint;
+
+        /// <summary>
+        /// ddlQualified 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlQualified;
+
+        /// <summary>
+        /// ddlCheckPerson 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DropDownList ddlCheckPerson;
+
+        /// <summary>
+        /// dpCheckTime 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.DatePicker dpCheckTime;
+
+        /// <summary>
+        /// txtRemark 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.TextArea txtRemark;
+
+        /// <summary>
+        /// btnAttach 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnAttach;
+
+        /// <summary>
+        /// btnSave 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnSave;
+
+        /// <summary>
+        /// btnClose 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Button btnClose;
+
+        /// <summary>
+        /// WindowAtt 控件。
+        /// </summary>
+        /// <remarks>
+        /// 自动生成的字段。
+        /// 若要进行修改，请将字段声明从设计器文件移到代码隐藏文件。
+        /// </remarks>
+        protected global::FineUIPro.Window WindowAtt;
+    }
+}
@@ -91,7 +91,7 @@
                                </f:Button>
                                <f:Button ID="btnStatisticsMat" ToolTip="匹配材料" Icon="TabGo" runat="server" OnClick="btnStatisticsMat_Click" Hidden="true">
                                </f:Button>
-                                <f:Button ID="btnExportPartialComponents" Text="导出部分已焊组件" ToolTip="按当前区域导出所选单位工程的部分已焊组件"
+                                <f:Button ID="btnExportPartialComponents" Text="导出全部组件" ToolTip="按当前区域导出所选单位工程的全部组件"
                                    Icon="TableGo" runat="server" OnClick="btnExportPartialComponents_Click" EnableAjax="false"
                                    DisableControlBeforePostBack="true" EnablePostBack="true">
                                </f:Button>
@@ -728,7 +728,7 @@ namespace FineUIPro.Web.HJGL.WeldingManage
        }

        /// <summary>
-        /// 按当前材料区域导出所选单位工程下全部部分已焊接组件。
+        /// 按当前材料区域导出所选单位工程下全部组件。
        /// </summary>
        protected void btnExportPartialComponents_Click(object sender, EventArgs e)
        {
@@ -748,11 +748,22 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                drpWarehouse.SelectedValue);
            if (!components.Any())
            {
-                ShowNotify("当前单位工程和区域下没有部分已焊接组件！", MessageBoxIcon.Warning);
+                ShowNotify("当前单位工程和区域下没有可导出的组件！", MessageBoxIcon.Warning);
                return;
            }

-            var exportData = components.Select(x => new
+            // 列顺序保持未焊口数后追加未焊达因量、材料编码、数量，便于后续导入使用；每个材料编码单独导出一行。
+            var exportData = components.SelectMany(x =>
+            {
+                List<string> materialCodes = SplitExportValues(x.MaterialCode);
+                List<string> materialQuantities = SplitExportValues(x.MaterialQuantity);
+                int materialRowCount = Math.Max(materialCodes.Count, materialQuantities.Count);
+                if (materialRowCount == 0)
+                {
+                    materialRowCount = 1;
+                }
+
+                return Enumerable.Range(0, materialRowCount).Select(index => new
                {
                    单位工程 = x.UnitWorkName,
                    区域 = x.PipeAreaText,
@@ -761,11 +772,16 @@ namespace FineUIPro.Web.HJGL.WeldingManage
                    总焊口数 = x.TotalWeldJointCount,
                    已焊口数 = x.WeldedWeldJointCount,
                    未焊口数 = x.UnweldedWeldJointCount,
-                组件匹配率 = x.ComponentMatchRateString
+                    未焊达因量 = x.UnweldedDin ?? 0,
+                    材料编码 = index < materialCodes.Count ? materialCodes[index] : string.Empty,
+                    数量 = index < materialQuantities.Count ? materialQuantities[index] : string.Empty,
+                    组件匹配率 = x.ComponentMatchRateString,
+                    组件状态 = GetComponentStatus(x.TotalWeldJointCount, x.UnweldedWeldJointCount)
+                });
            }).ToList();

            string areaText = PipeArea == PipelineService.PipeArea_SHOP ? "工厂预制" : "现场安装";
-            string fileName = GetSafeFileName(unitWork.UnitWorkName) + "_" + areaText + "_部分已焊组件_" + DateTime.Now.ToString("yyyyMMdd") + ".xlsx";
+            string fileName = GetSafeFileName(unitWork.UnitWorkName) + "_" + areaText + "_全部组件_" + DateTime.Now.ToString("yyyyMMdd") + ".xlsx";
            string tempDirectory = Path.Combine(Funs.RootPath, @"File\Excel\Temp");
            Directory.CreateDirectory(tempDirectory);
            string filePath = Path.Combine(tempDirectory, Guid.NewGuid().ToString("N") + ".xlsx");
@@ -794,6 +810,29 @@ namespace FineUIPro.Web.HJGL.WeldingManage
            return safeFileName;
        }

+        private static List<string> SplitExportValues(string values)
+        {
+            return string.IsNullOrEmpty(values)
+                ? new List<string>()
+                : values.Split(new[] { "\r\n", "\n" }, StringSplitOptions.RemoveEmptyEntries)
+                    .Select(x => x.Trim())
+                    .ToList();
+        }
+
+        private static string GetComponentStatus(int totalWeldJointCount, int unweldedWeldJointCount)
+        {
+            // 以总焊口数和未焊口数判断组件进度：全部未焊为未开始、无未焊口为已完成，其余为进行中。
+            if (unweldedWeldJointCount == totalWeldJointCount)
+            {
+                return "未开始";
+            }
+            if (unweldedWeldJointCount == 0)
+            {
+                return "已完成";
+            }
+            return "进行中";
+        }
+
        /// <summary>
        /// 按树节点获取可加入本次匹配的管线。单位工程节点会展开到其下所有试压包，再套用当前仓库和页面筛选条件。
        /// </summary>
@@ -64,6 +64,7 @@
 <TreeNode id="D1B5A8B7-5D2A-4C51-9B7E-6A2F15B7F002" Text="管道下料检查记录" NavigateUrl="HJGL/PreWeld/CuttingCheck.aspx"></TreeNode>
 <TreeNode id="D1B5A8B7-5D2A-4C51-9B7E-6A2F15B7F003" Text="组对检查记录" NavigateUrl="HJGL/PreWeld/FitupCheck.aspx"></TreeNode>
 <TreeNode id="5TYHMD2F-2582-4DEB-905E-6E9DCFEFBGHO" Text="焊接日报" NavigateUrl="HJGL/WeldingManage/WeldReport.aspx"></TreeNode>
+<TreeNode id="A4C8F8A1-1A27-4B63-A6DF-3F8AAE67C901" Text="焊缝外观检测记录" NavigateUrl="HJGL/WeldingManage/WeldAppearanceCheck.aspx"></TreeNode>
 </TreeNode>
 <TreeNode id="3363C60A-E1ED-445B-BC93-DF2BE04D9759" Text="无损检测管理" NavigateUrl=""><TreeNode id="3ACE25CE-C5CE-4CEC-AD27-0D5CF1DF2F01" Text="点口管理" NavigateUrl="HJGL/PointTrust/PointBatch.aspx"></TreeNode>
 <TreeNode id="0CA58EC2-7934-49B3-A2C3-327FAD27C541" Text="无损检测委托单" NavigateUrl="HJGL/PointTrust/TrustBatch.aspx"></TreeNode>
@@ -108,6 +108,16 @@
        /// </summary>
        public int welderType { get; set; }

+        /// <summary>
+        /// 焊接方法ID；兼容旧版小程序，可不传
+        /// </summary>
+        public string WeldingMethodId { get; set; }
+
+        /// <summary>
+        /// 焊缝类型ID；兼容旧版小程序，可不传
+        /// </summary>
+        public string WeldTypeId { get; set; }
+
        /// <summary>
        /// 焊前附件路径
        /// </summary>
@@ -102,6 +102,20 @@ namespace Model
    /// </summary>
    public class PreWeldMaterialItem
    {
+        /// <summary>
+        /// 管线材料ID
+        /// </summary>
+        public string PipeLineMatId { get; set; }
+
+        /// <summary>
+        /// 焊口侧序号
+        /// </summary>
+        public int MaterialSide { get; set; }
+
+        /// <summary>
+        /// 材料主编码
+        /// </summary>
+        public string MainCode { get; set; }
        
        /// <summary>
        /// 材料编码
@@ -221,6 +235,16 @@ namespace Model
        /// 备注
        /// </summary>
        public string Remark { get; set; }
+
+        /// <summary>
+        /// 专项审核办理人；材料编码或批次不准确时必填
+        /// </summary>
+        public string SpecialReviewerId { get; set; }
+
+        /// <summary>
+        /// 两侧材料主编码反馈
+        /// </summary>
+        public List<PreWeldCuttingMaterialInput> Materials { get; set; }
    }

    /// <summary>
@@ -332,6 +356,37 @@ namespace Model
        /// 备注
        /// </summary>
        public string Remark { get; set; }
+
+        public int ReviewState { get; set; }
+        public string ReviewStateText { get; set; }
+        public string SpecialReviewerId { get; set; }
+        public string SpecialReviewerName { get; set; }
+        public string ReviewerId { get; set; }
+        public string ReviewerName { get; set; }
+        public DateTime? ReviewTime { get; set; }
+        public List<PreWeldCuttingMaterialItem> Materials { get; set; }
+    }
+
+    public class PreWeldCuttingMaterialInput
+    {
+        public string PipeLineMatId { get; set; }
+        public int MaterialSide { get; set; }
+        public string ReportedMainCode { get; set; }
+    }
+
+    public class PreWeldCuttingMaterialItem : PreWeldCuttingMaterialInput
+    {
+        public string OriginalMainCode { get; set; }
+        public bool IsBatchChanged { get; set; }
+    }
+
+    public class PreWeldCuttingCheckReviewInput
+    {
+        public string CuttingCheckId { get; set; }
+        public string ReviewerId { get; set; }
+        public DateTime? ReviewTime { get; set; }
+        public string Remark { get; set; }
+        public List<PreWeldCuttingMaterialInput> Materials { get; set; }
    }

    /// <summary>
@@ -0,0 +1,47 @@
+using System;
+using System.Collections.Generic;
+
+namespace Model
+{
+    public class WeldAppearanceCheckInput
+    {
+        public string AppearanceCheckId { get; set; }
+        public string ProjectId { get; set; }
+        public string WeldJointId { get; set; }
+        public bool IsQualified { get; set; }
+        public string CheckPerson { get; set; }
+        public DateTime? CheckTime { get; set; }
+        public string Remark { get; set; }
+        public string AttachUrl { get; set; }
+        public string CreateUser { get; set; }
+    }
+
+    public class WeldAppearanceCheckItem
+    {
+        public string AppearanceCheckId { get; set; }
+        public string ProjectId { get; set; }
+        public string WeldJointId { get; set; }
+        public string PipelineCode { get; set; }
+        public string WeldJointCode { get; set; }
+        public bool IsQualified { get; set; }
+        public string QualifiedText { get; set; }
+        public string CheckPerson { get; set; }
+        public string CheckPersonName { get; set; }
+        public DateTime CheckTime { get; set; }
+        public string Remark { get; set; }
+        public string AttachUrl { get; set; }
+        public DateTime CreateTime { get; set; }
+    }
+
+    public class WeldAppearanceJointItem
+    {
+        public string WeldJointId { get; set; }
+        public string ProjectId { get; set; }
+        public string PipelineCode { get; set; }
+        public string WeldJointCode { get; set; }
+        public string WeldTypeCode { get; set; }
+        public string WeldingMethodCode { get; set; }
+        public DateTime? WeldingDate { get; set; }
+        public List<WeldAppearanceCheckItem> History { get; set; }
+    }
+}
@@ -19,6 +19,7 @@ namespace Model
        public decimal StockNum { get; set; }
        public decimal NeedNum { get; set; }
        public decimal RealNum { get; set; }
+        public decimal OutputNum { get; set; }
        public decimal MatchRate { get; set; }
        public string MatchRateString { get; set; }
    }
@@ -52,7 +52,7 @@ namespace Model
    }

    /// <summary>
-    /// 单位工程下部分已焊接组件的导出汇总。
+    /// 单位工程下组件导出汇总。
    /// </summary>
    public class Tw_PartialWeldedComponentOutput
    {
@@ -66,6 +66,12 @@ namespace Model
        public int TotalWeldJointCount { get; set; }
        public int WeldedWeldJointCount { get; set; }
        public int UnweldedWeldJointCount { get; set; }
+        /// <summary>未焊焊口的达因量。</summary>
+        public decimal? UnweldedDin { get; set; }
+        /// <summary>组件材料编码，多个编码使用换行分隔。</summary>
+        public string MaterialCode { get; set; }
+        /// <summary>与材料编码按顺序对应的组件材料数量。</summary>
+        public string MaterialQuantity { get; set; }
        public decimal? ComponentMatchRate { get; set; }
        public string ComponentMatchRateString { get; set; }
    }
@@ -0,0 +1,105 @@
+using System;
+using System.Data.Linq;
+using System.Data.Linq.Mapping;
+
+namespace Model
+{
+    public partial class SGGLDB
+    {
+        public Table<HJGL_PreWeldCuttingCheckMaterial> HJGL_PreWeldCuttingCheckMaterial
+        {
+            get { return GetTable<HJGL_PreWeldCuttingCheckMaterial>(); }
+        }
+
+        public Table<HJGL_WeldAppearanceCheck> HJGL_WeldAppearanceCheck
+        {
+            get { return GetTable<HJGL_WeldAppearanceCheck>(); }
+        }
+    }
+
+    public partial class HJGL_PreWeldCuttingCheck
+    {
+        [Column(DbType = "Int NOT NULL")]
+        public int ReviewState { get; set; }
+
+        [Column(DbType = "NVarChar(50)")]
+        public string SpecialReviewerId { get; set; }
+
+        [Column(DbType = "NVarChar(50)")]
+        public string ReviewerId { get; set; }
+
+        [Column(DbType = "DateTime")]
+        public DateTime? ReviewTime { get; set; }
+    }
+
+    [Table(Name = "dbo.HJGL_PreWeldCuttingCheckMaterial")]
+    public class HJGL_PreWeldCuttingCheckMaterial
+    {
+        [Column(IsPrimaryKey = true, CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string CuttingCheckMaterialId { get; set; }
+
+        [Column(CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string CuttingCheckId { get; set; }
+
+        [Column(CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string PipeLineMatId { get; set; }
+
+        [Column(DbType = "Int NOT NULL")]
+        public int MaterialSide { get; set; }
+
+        [Column(DbType = "NVarChar(100)")]
+        public string OriginalMainCode { get; set; }
+
+        [Column(DbType = "NVarChar(100)")]
+        public string ReportedMainCode { get; set; }
+
+        [Column(DbType = "Bit NOT NULL")]
+        public bool IsBatchChanged { get; set; }
+    }
+
+    [Table(Name = "dbo.HJGL_WeldAppearanceCheck")]
+    public class HJGL_WeldAppearanceCheck
+    {
+        [Column(IsPrimaryKey = true, CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string AppearanceCheckId { get; set; }
+
+        [Column(CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string ProjectId { get; set; }
+
+        [Column(CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string WeldJointId { get; set; }
+
+        [Column(DbType = "Bit NOT NULL")]
+        public bool IsQualified { get; set; }
+
+        [Column(CanBeNull = false, DbType = "NVarChar(50) NOT NULL")]
+        public string CheckPerson { get; set; }
+
+        [Column(DbType = "DateTime NOT NULL")]
+        public DateTime CheckTime { get; set; }
+
+        [Column(DbType = "NVarChar(500)")]
+        public string Remark { get; set; }
+
+        [Column(DbType = "NVarChar(50)")]
+        public string CreateUser { get; set; }
+
+        [Column(DbType = "DateTime NOT NULL")]
+        public DateTime CreateTime { get; set; }
+
+        [Column(DbType = "NVarChar(50)")]
+        public string ModifyUser { get; set; }
+
+        [Column(DbType = "DateTime")]
+        public DateTime? ModifyTime { get; set; }
+    }
+
+    public partial class View_HJGL_WeldJoint
+    {
+        [Column(DbType = "Bit")]
+        public bool? WeldAppearanceIsQualified { get; set; }
+
+        [Column(DbType = "NVarChar(10) NOT NULL", CanBeNull = false)]
+        public string WeldAppearanceResult { get; set; }
+    }
+}
@@ -128,6 +128,7 @@
    <Compile Include="APIItem\HSSE\HazardRegisterItem.cs" />
    <Compile Include="APIItem\HJGL\HJGL_PreWeldingDailyItem.cs" />
    <Compile Include="APIItem\HJGL\PreWeldInspectionItem.cs" />
+    <Compile Include="APIItem\HJGL\WeldAppearanceCheckItem.cs" />
    <Compile Include="APIItem\HJGL\ViewHJGLWeldJointExtend.cs" />
    <Compile Include="APIItem\HJGL\HotProcessHardItem.cs" />
    <Compile Include="APIItem\HJGL\NDETrustItem.cs" />
@@ -280,6 +281,7 @@
    <Compile Include="HSSE\PuPayCraftAmountInput.cs" />
    <Compile Include="HSSE\WorkPostStatisticItem.cs" />
    <Compile Include="HSSE\HSSE_HazardTemplate.cs" />
+    <Compile Include="HJGL\HJGLQualityExtensions.cs" />
    <Compile Include="Model.cs" />
    <Compile Include="ModelProc.cs" />
    <Compile Include="Num.cs" />
@@ -47,5 +47,42 @@ namespace WebAPI.Controllers.HJGL.WeldingManage

            return responeData;
        }
+
+        /// <summary>
+        /// 获取当前项目可选择的专项审核办理人。
+        /// </summary>
+        public Model.ResponeData GetSpecialReviewers(string projectId)
+        {
+            var responeData = new Model.ResponeData();
+            try
+            {
+                responeData.data = APIPreWeldInspectionService.GetSpecialReviewers(projectId);
+            }
+            catch (Exception ex)
+            {
+                responeData.code = 0;
+                responeData.message = ex.Message;
+            }
+            return responeData;
+        }
+
+        /// <summary>
+        /// 办结下料抽检专项审核。
+        /// </summary>
+        [HttpPost]
+        public Model.ResponeData ReviewRecord([FromBody] Model.PreWeldCuttingCheckReviewInput item)
+        {
+            var responeData = new Model.ResponeData();
+            try
+            {
+                responeData.data = APIPreWeldInspectionService.ReviewCuttingCheck(item);
+            }
+            catch (Exception ex)
+            {
+                responeData.code = 0;
+                responeData.message = ex.Message;
+            }
+            return responeData;
+        }
    }
 }
@@ -0,0 +1,81 @@
+using BLL;
+using System;
+using System.Web.Http;
+
+namespace WebAPI.Controllers.HJGL.WeldingManage
+{
+    /// <summary>
+    /// 焊缝外观检测接口。
+    /// </summary>
+    public class WeldAppearanceCheckController : ApiController
+    {
+        /// <summary>
+        /// 分页查询当前项目中已焊接的焊口。
+        /// </summary>
+        /// <param name="projectId">项目ID。</param>
+        /// <param name="pipelineCode">管线号查询条件。</param>
+        /// <param name="weldJointCode">焊口号查询条件。</param>
+        /// <param name="pageIndex">页码，从0开始。</param>
+        /// <param name="pageSize">每页记录数。</param>
+        /// <returns>已焊接焊口列表。</returns>
+        public Model.ResponeData GetWeldedJoints(string projectId, string pipelineCode = "", string weldJointCode = "", int pageIndex = 0, int pageSize = 20)
+        {
+            var responeData = new Model.ResponeData();
+            try
+            {
+                responeData.data = WeldAppearanceCheckService.GetWeldedJoints(
+                    projectId, pipelineCode, weldJointCode, pageIndex, pageSize);
+            }
+            catch (Exception ex)
+            {
+                responeData.code = 0;
+                responeData.message = ex.Message;
+            }
+
+            return responeData;
+        }
+
+        /// <summary>
+        /// 查询焊口基础信息及历史外观检测记录。
+        /// </summary>
+        /// <param name="weldJointId">焊口ID。</param>
+        /// <returns>焊口详情及外观检测历史。</returns>
+        public Model.ResponeData GetJointDetail(string weldJointId)
+        {
+            var responeData = new Model.ResponeData();
+            try
+            {
+                responeData.data = WeldAppearanceCheckService.GetJointDetail(weldJointId);
+            }
+            catch (Exception ex)
+            {
+                responeData.code = 0;
+                responeData.message = ex.Message;
+            }
+
+            return responeData;
+        }
+
+        /// <summary>
+        /// 保存焊缝外观检测记录。
+        /// </summary>
+        /// <param name="item">外观检测结果、检测人、检测时间及照片信息。</param>
+        /// <returns>外观检测记录ID。</returns>
+        [HttpPost]
+        public Model.ResponeData SaveRecord([FromBody] Model.WeldAppearanceCheckInput item)
+        {
+            var responeData = new Model.ResponeData();
+            try
+            {
+                responeData.data = WeldAppearanceCheckService.Save(item);
+            }
+            catch (Exception ex)
+            {
+                responeData.code = 0;
+                responeData.message = ex.Message;
+            }
+
+            return responeData;
+        }
+    }
+}
@@ -216,6 +216,7 @@
    <Compile Include="Controllers\HJGL\WeldingManage\PipeJointController.cs" />
    <Compile Include="Controllers\HJGL\WeldingManage\AntiCorrosionCheckController.cs" />
    <Compile Include="Controllers\HJGL\WeldingManage\PreWeldCuttingCheckController.cs" />
+    <Compile Include="Controllers\HJGL\WeldingManage\WeldAppearanceCheckController.cs" />
    <Compile Include="Controllers\HJGL\WeldingManage\PreWeldFitupCheckController.cs" />
    <Compile Include="Controllers\HJGL\WeldingManage\PreWeldingDailyController.cs" />
    <Compile Include="Controllers\HJGL\WeldingManage\ReportQueryController.cs" />