feat(hjgl): 完善焊前检查和防腐检查流程

焊前检查需要同时覆盖下料、组对和防腐检查，并支持移动端查询与保存。
扩展焊前检查模型、服务和页面字段，补充检查结果、不合格原因、整改要求、
附件和防腐检查记录，便于按焊口和材料追溯检查过程。

SGGL/Model/APIItem/HJGL/PreWeldInspectionItem.cs

@@ -1,4 +1,5 @@
-using System;
+using System;
+using System.Collections.Generic;
 
 namespace Model
 {
@@ -7,30 +8,77 @@ namespace Model
     /// </summary>
     public class PreWeldJointItem
     {
+        /// <summary>
+        /// 焊口ID
+        /// </summary>
         public string WeldJointId { get; set; }
 
+        /// <summary>
+        /// 焊口编号
+        /// </summary>
         public string WeldJointCode { get; set; }
 
+        /// <summary>
+        /// 管线ID
+        /// </summary>
         public string PipelineId { get; set; }
 
+        /// <summary>
+        /// 管线编号
+        /// </summary>
         public string PipelineCode { get; set; }
 
+        /// <summary>
+        /// 项目ID
+        /// </summary>
         public string ProjectId { get; set; }
 
+        /// <summary>
+        /// 项目名称
+        /// </summary>
         public string ProjectName { get; set; }
 
+        /// <summary>
+        /// 防腐代码字典ID
+        /// </summary>
+        public string PaintId { get; set; }
+        /// <summary>
+        /// 防腐代码
+        /// </summary>
+        public string PaintCode { get; set; }
+        /// <summary>
+        /// 坡口类型ID
+        /// </summary>
         public string GrooveTypeId { get; set; }
 
+        /// <summary>
+        /// 坡口类型编码
+        /// </summary>
         public string GrooveTypeCode { get; set; }
 
+        /// <summary>
+        /// 坡口类型名称
+        /// </summary>
         public string GrooveTypeName { get; set; }
 
+        /// <summary>
+        /// 坡口加工类型
+        /// </summary>
         public string GrooveProcessType { get; set; }
 
+        /// <summary>
+        /// 坡口角度
+        /// </summary>
         public decimal? GrooveAngle { get; set; }
 
+        /// <summary>
+        /// 组对间隙
+        /// </summary>
         public decimal? FitupGap { get; set; }
 
+        /// <summary>
+        /// 错边量
+        /// </summary>
         public decimal? Misalignment { get; set; }
 
         /// <summary>
@@ -42,85 +90,761 @@ namespace Model
         /// 组对抽检附件路径
         /// </summary>
         public string FitupAttachUrl1 { get; set; }
+
+        /// <summary>
+        /// 焊前抽检材料信息
+        /// </summary>
+        public List<PreWeldMaterialItem> preWeldMaterialItems { get; set; }
     }
 
     /// <summary>
-    /// 下料抽检保存参数
+    /// 焊前抽检材料信息
+    /// </summary>
+    public class PreWeldMaterialItem
+    {
+        
+        /// <summary>
+        /// 材料编码
+        /// </summary>
+        public string MaterialCode { get; set; }
+        /// <summary>
+        /// 材料名称
+        /// </summary>
+        public string MaterialName { get; set; }
+        /// <summary>
+        /// 材料规格
+        /// </summary>
+        public string MaterialSpec { get; set; }
+        /// <summary>
+        /// 材质
+        /// </summary>
+        public string MaterialMade { get; set; }
+        /// <summary>
+        /// 材料定义
+        /// </summary>
+        public string MaterialDef { get; set; }
+        /// <summary>
+        /// 材料单位
+        /// </summary>
+        public string MaterialUnit { get; set; }
+        /// <summary>
+        /// 炉号
+        /// </summary>
+        public string HeatNo { get; set; }
+        /// <summary>
+        /// 批号
+        /// </summary>
+        public string BatchNo { get; set; }
+    }
+
+    /// <summary>
+    /// 下料抽检保存入参
+    /// </summary>
+    public class PreWeldCuttingCheckInput
+    {
+        /// <summary>
+        /// 下料检查记录ID；为空时新增，不为空时修改对应记录
+        /// </summary>
+        public string CuttingCheckId { get; set; }
+
+        /// <summary>
+        /// 项目ID
+        /// </summary>
+        public string ProjectId { get; set; }
+
+        /// <summary>
+        /// 焊口ID
+        /// </summary>
+        public string WeldJointId { get; set; }
+
+        /// <summary>
+        /// 下料长度
+        /// </summary>
+        public decimal? CuttingLength { get; set; }
+
+        /// <summary>
+        /// 坡口形式
+        /// </summary>
+        public string GrooveForm { get; set; }
+
+        /// <summary>
+        /// 坡口角度
+        /// </summary>
+        public decimal? GrooveAngle { get; set; }
+
+        /// <summary>
+        /// 材料编码批次是否准确
+        /// </summary>
+        public bool IsMaterialCodeBatchNoAccurate { get; set; }
+
+        /// <summary>
+        /// 材料数量是否准确
+        /// </summary>
+        public bool IsMaterialQuantityAccurate { get; set; }
+
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
+        public string CheckPerson { get; set; }
+
+        /// <summary>
+        /// 检查时间
+        /// </summary>
+        public DateTime? CheckTime { get; set; }
+
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
+        public string CreateUser { get; set; }
+
+        /// <summary>
+        /// 附件路径
+        /// </summary>
+        public string AttachUrl1 { get; set; }
+
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
+        public string Remark { get; set; }
+    }
+
+    /// <summary>
+    /// 下料抽检返回实体
     /// </summary>
     public class PreWeldCuttingCheckItem
     {
+        /// <summary>
+        /// 下料检查记录ID
+        /// </summary>
         public string CuttingCheckId { get; set; }
 
+        /// <summary>
+        /// 项目ID
+        /// </summary>
         public string ProjectId { get; set; }
 
+        /// <summary>
+        /// 焊口ID
+        /// </summary>
         public string WeldJointId { get; set; }
 
-        public string PipelineCode { get; set; }
-
+        /// <summary>
+        /// 焊口编号
+        /// </summary>
         public string WeldJointCode { get; set; }
 
-        public bool IsMaterialCodeBatchNoAccurate { get; set; }
+        /// <summary>
+        /// 管线编号
+        /// </summary>
+        public string PipelineCode { get; set; }
 
-        public bool IsMaterialQuantityAccurate { get; set; }
+        /// <summary>
+        /// 下料长度
+        /// </summary>
+        public decimal? CuttingLength { get; set; }
 
+        /// <summary>
+        /// 坡口形式
+        /// </summary>
+        public string GrooveForm { get; set; }
+
+        /// <summary>
+        /// 坡口角度
+        /// </summary>
+        public decimal? GrooveAngle { get; set; }
+
+        /// <summary>
+        /// 是否合格
+        /// </summary>
         public bool IsQualified { get; set; }
 
+        /// <summary>
+        /// 材料编码批次是否准确
+        /// </summary>
+        public bool IsMaterialCodeBatchNoAccurate { get; set; }
+
+        /// <summary>
+        /// 材料数量是否准确
+        /// </summary>
+        public bool IsMaterialQuantityAccurate { get; set; }
+
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
         public string CheckPerson { get; set; }
 
+        /// <summary>
+        /// 检查人姓名
+        /// </summary>
         public string CheckPersonName { get; set; }
 
+        /// <summary>
+        /// 检查时间
+        /// </summary>
         public DateTime? CheckTime { get; set; }
 
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
         public string CreateUser { get; set; }
 
+        /// <summary>
+        /// 创建时间
+        /// </summary>
         public DateTime? CreateTime { get; set; }
 
+        /// <summary>
+        /// 附件路径
+        /// </summary>
         public string AttachUrl1 { get; set; }
 
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
         public string Remark { get; set; }
     }
 
     /// <summary>
-    /// 组对抽检保存参数
+    /// 组对抽检保存入参
+    /// </summary>
+    public class PreWeldFitupCheckInput
+    {
+        /// <summary>
+        /// 组对检查记录ID；为空时新增，不为空时修改对应记录
+        /// </summary>
+        public string FitupCheckId { get; set; }
+
+        /// <summary>
+        /// 项目ID
+        /// </summary>
+        public string ProjectId { get; set; }
+
+        /// <summary>
+        /// 焊口ID
+        /// </summary>
+        public string WeldJointId { get; set; }
+
+        /// <summary>
+        /// 坡口类型ID
+        /// </summary>
+        public string GrooveTypeId { get; set; }
+
+        /// <summary>
+        /// 坡口类型名称
+        /// </summary>
+        public string GrooveTypeName { get; set; }
+
+        /// <summary>
+        /// 坡口类型编码
+        /// </summary>
+        public string GrooveTypeCode { get; set; }
+
+        /// <summary>
+        /// 坡口加工类型
+        /// </summary>
+        public string GrooveProcessType { get; set; }
+
+        /// <summary>
+        /// 坡口角度
+        /// </summary>
+        public decimal? GrooveAngle { get; set; }
+
+        /// <summary>
+        /// 组对间隙
+        /// </summary>
+        public decimal? FitupGap { get; set; }
+
+        /// <summary>
+        /// 错边量
+        /// </summary>
+        public decimal? Misalignment { get; set; }
+
+        /// <summary>
+        /// 焊缝余高
+        /// </summary>
+        public decimal? WeldReinforcement { get; set; }
+
+        /// <summary>
+        /// 焊缝高度
+        /// </summary>
+        public decimal? WeldHeight { get; set; }
+
+        /// <summary>
+        /// 焊缝宽度
+        /// </summary>
+        public decimal? WeldWidth { get; set; }
+
+        /// <summary>
+        /// 表面缺陷
+        /// </summary>
+        public string SurfaceDefect { get; set; }
+
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
+        public string CheckPerson { get; set; }
+
+        /// <summary>
+        /// 检查时间
+        /// </summary>
+        public DateTime? CheckTime { get; set; }
+
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
+        public string CreateUser { get; set; }
+
+        /// <summary>
+        /// 附件路径
+        /// </summary>
+        public string AttachUrl1 { get; set; }
+
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
+        public string Remark { get; set; }
+    }
+
+    /// <summary>
+    /// 组对抽检返回实体
     /// </summary>
     public class PreWeldFitupCheckItem
     {
+        /// <summary>
+        /// 组对检查记录ID
+        /// </summary>
         public string FitupCheckId { get; set; }
 
+        /// <summary>
+        /// 项目ID
+        /// </summary>
         public string ProjectId { get; set; }
 
+        /// <summary>
+        /// 焊口ID
+        /// </summary>
         public string WeldJointId { get; set; }
 
-        public string PipelineCode { get; set; }
-
+        /// <summary>
+        /// 焊口编号
+        /// </summary>
         public string WeldJointCode { get; set; }
 
-        public string GrooveTypeId { get; set; }
+        /// <summary>
+        /// 管线编号
+        /// </summary>
+        public string PipelineCode { get; set; }
 
+        /// <summary>
+        /// 坡口类型编码
+        /// </summary>
         public string GrooveTypeCode { get; set; }
 
+        /// <summary>
+        /// 坡口类型ID
+        /// </summary>
+        public string GrooveTypeId { get; set; }
+
+        /// <summary>
+        /// 坡口类型名称
+        /// </summary>
         public string GrooveTypeName { get; set; }
 
+        /// <summary>
+        /// 焊缝余高
+        /// </summary>
+        public decimal? WeldReinforcement { get; set; }
+
+        /// <summary>
+        /// 焊缝高度
+        /// </summary>
+        public decimal? WeldHeight { get; set; }
+
+        /// <summary>
+        /// 焊缝宽度
+        /// </summary>
+        public decimal? WeldWidth { get; set; }
+
+        /// <summary>
+        /// 表面缺陷
+        /// </summary>
+        public string SurfaceDefect { get; set; }
+
+        /// <summary>
+        /// 坡口加工类型
+        /// </summary>
         public string GrooveProcessType { get; set; }
 
+        /// <summary>
+        /// 坡口角度
+        /// </summary>
         public decimal? GrooveAngle { get; set; }
 
+        /// <summary>
+        /// 组对间隙
+        /// </summary>
         public decimal? FitupGap { get; set; }
 
+        /// <summary>
+        /// 错边量
+        /// </summary>
         public decimal? Misalignment { get; set; }
 
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
         public string CheckPerson { get; set; }
 
+        /// <summary>
+        /// 检查人姓名
+        /// </summary>
         public string CheckPersonName { get; set; }
 
+        /// <summary>
+        /// 检查时间
+        /// </summary>
         public DateTime? CheckTime { get; set; }
 
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
         public string CreateUser { get; set; }
 
+        /// <summary>
+        /// 创建时间
+        /// </summary>
         public DateTime? CreateTime { get; set; }
 
+        /// <summary>
+        /// 附件路径
+        /// </summary>
         public string AttachUrl1 { get; set; }
 
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
         public string Remark { get; set; }
     }
+
+    /// <summary>
+    /// 防腐检查保存入参
+    /// </summary>
+    public class AntiCorrosionCheckRecordInput
+    {
+        /// <summary>
+        /// 防腐检查记录ID
+        /// </summary>
+        public string AntiCorrosionCheckId { get; set; }
+
+        /// <summary>
+        /// 项目ID
+        /// </summary>
+        public string ProjectId { get; set; }
+
+        /// <summary>
+        /// 材料主数据ID
+        /// </summary>
+        public string MaterialId { get; set; }
+
+        /// <summary>
+        /// 材料编码
+        /// </summary>
+        public string MaterialCode { get; set; }
+
+        /// <summary>
+        /// 防腐等级
+        /// </summary>
+        public string AnticorrosionLevel { get; set; }
+
+        /// <summary>
+        /// 防腐代码字典ID
+        /// </summary>
+        public string PaintId { get; set; }
+
+        /// <summary>
+        /// 膜厚
+        /// </summary>
+        public decimal? FilmThickness { get; set; }
+
+        /// <summary>
+        /// 喷砂信息
+        /// </summary>
+        public string SandBlasting { get; set; }
+
+        /// <summary>
+        /// 除锈喷砂信息
+        /// </summary>
+        public string RustSandBlasting { get; set; }
+
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
+        public string CheckPerson { get; set; }
+
+        /// <summary>
+        /// 检查时间
+        /// </summary>
+        public DateTime? CheckTime { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
+        public string Remark { get; set; }
+
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
+        public string CreateUser { get; set; }
+
+        /// <summary>
+        /// 附件路径
+        /// </summary>
+        public string AttachUrl1 { get; set; }
+    }
+
+    /// <summary>
+    /// 防腐检查返回实体
+    /// </summary>
+    public class AntiCorrosionCheckRecordItem
+    {
+        /// <summary>
+        /// 防腐检查记录ID
+        /// </summary>
+        public string AntiCorrosionCheckId { get; set; }
+
+        /// <summary>
+        /// 项目ID
+        /// </summary>
+        public string ProjectId { get; set; }
+
+        /// <summary>
+        /// 单位工程ID
+        /// </summary>
+        public string UnitWorkId { get; set; }
+
+        /// <summary>
+        /// 材料主数据ID
+        /// </summary>
+        public string MaterialId { get; set; }
+
+        /// <summary>
+        /// 材料编码
+        /// </summary>
+        public string MaterialCode { get; set; }
+
+        /// <summary>
+        /// 材料名称
+        /// </summary>
+        public string MaterialName { get; set; }
+
+        /// <summary>
+        /// 材料规格
+        /// </summary>
+        public string MaterialSpec { get; set; }
+
+        /// <summary>
+        /// 材质
+        /// </summary>
+        public string MaterialMade { get; set; }
+
+        /// <summary>
+        /// 材料定义
+        /// </summary>
+        public string MaterialDef { get; set; }
+
+        /// <summary>
+        /// 材料单位
+        /// </summary>
+        public string MaterialUnit { get; set; }
+
+        /// <summary>
+        /// 炉批号
+        /// </summary>
+        public string HeatNo { get; set; }
+
+        /// <summary>
+        /// 批次号
+        /// </summary>
+        public string BatchNo { get; set; }
+
+        /// <summary>
+        /// 材料编码库代码
+        /// </summary>
+        public string Code { get; set; }
+
+        /// <summary>
+        /// 防腐等级
+        /// </summary>
+        public string AnticorrosionLevel { get; set; }
+
+        /// <summary>
+        /// 防腐代码字典ID
+        /// </summary>
+        public string PaintId { get; set; }
+
+        /// <summary>
+        /// 涂漆代码
+        /// </summary>
+        public string PaintCode { get; set; }
+
+        /// <summary>
+        /// 底漆
+        /// </summary>
+        public string Primer { get; set; }
+
+        /// <summary>
+        /// 中间漆
+        /// </summary>
+        public string IntermediatePaint { get; set; }
+
+        /// <summary>
+        /// 面漆
+        /// </summary>
+        public string Topcoat { get; set; }
+
+        /// <summary>
+        /// 颜色编码
+        /// </summary>
+        public string ColorCode { get; set; }
+
+        /// <summary>
+        /// 膜厚
+        /// </summary>
+        public decimal? FilmThickness { get; set; }
+
+        /// <summary>
+        /// 喷砂信息
+        /// </summary>
+        public string SandBlasting { get; set; }
+
+        /// <summary>
+        /// 除锈喷砂信息
+        /// </summary>
+        public string RustSandBlasting { get; set; }
+
+        /// <summary>
+        /// 检查结果
+        /// </summary>
+        public string CheckResult { get; set; }
+
+        /// <summary>
+        /// 检查人ID
+        /// </summary>
+        public string CheckPerson { get; set; }
+
+        /// <summary>
+        /// 检查人姓名
+        /// </summary>
+        public string CheckPersonName { get; set; }
+
+        /// <summary>
+        /// 检查时间
+        /// </summary>
+        public DateTime? CheckTime { get; set; }
+
+        /// <summary>
+        /// 不合格原因
+        /// </summary>
+        public string UnqualifiedReason { get; set; }
+
+        /// <summary>
+        /// 整改要求
+        /// </summary>
+        public string RectifyRequirement { get; set; }
+
+        /// <summary>
+        /// 备注
+        /// </summary>
+        public string Remark { get; set; }
+
+        /// <summary>
+        /// 创建人ID
+        /// </summary>
+        public string CreateUser { get; set; }
+
+        /// <summary>
+        /// 创建时间
+        /// </summary>
+        public DateTime? CreateTime { get; set; }
+
+        /// <summary>
+        /// 附件路径
+        /// </summary>
+        public string AttachUrl1 { get; set; }
+    }
 }

SGGL/Model/APIItem/HJGL/ViewHJGLWeldJointExtend.cs

@@ -1,7 +1,7 @@
 namespace Model
 {
     public partial class View_HJGL_WeldJoint
-    {
+    {      
         /// <summary>
         /// 焊前附件路径
         /// </summary>
@@ -11,5 +11,14 @@ namespace Model
         /// 焊后附件路径
         /// </summary>
         public string PostWeldAttachUrl { get; set; }
+        /// <summary>
+        /// 防腐等级代码
+        /// </summary>
+        public string PaintCode { get; set; }
+
+        /// <summary>
+        /// 防腐等级字典ID
+        /// </summary>
+        public string PaintId { get; set; }
     }
 }