using EmitMapper;
using FineUIPro;
using Microsoft.SqlServer.Dts.Runtime;
using MiniExcelLibs;
using Model;
using System;
using System.Collections;
using System.Collections.Generic;
using System.Linq;


namespace BLL
{

    public static class TwInOutplanmasterService
    {

        #region 获取列表
        /// <summary>
        /// 记录数
        /// </summary>
        public static int Count
        {
            get;
            set;
        }
        public static IQueryable<Model.Tw_InOutMasterOutput> GetModle(Model.Tw_InOutMasterOutput table)
        {
            var q = from x in Funs.DB.Tw_InOutPlanMaster
                    join y in Funs.DB.HJGL_WeldTask on x.WeldTaskId equals y.WeldTaskId into yy
                    from y in yy.DefaultIfEmpty()
                    join person in Funs.DB.Person_Persons on x.CreateMan equals person.PersonId into persons
                    from person in persons.DefaultIfEmpty()
                    join auditperson in Funs.DB.Person_Persons on x.AuditMan equals auditperson.PersonId into auditpersons
                    from auditperson in auditpersons.DefaultIfEmpty()
                    join auditperson2 in Funs.DB.Person_Persons on x.AuditMan2 equals auditperson2.PersonId into auditpersons2
                    from auditperson2 in auditpersons2.DefaultIfEmpty()
                    join warehouseperson in Funs.DB.Person_Persons on x.WarehouseMan equals warehouseperson.PersonId into warehousepersons
                    from warehouseperson in warehousepersons.DefaultIfEmpty()
                    join unit in Funs.DB.Base_Unit on x.ReqUnitId equals unit.UnitId into units
                    from unit in units.DefaultIfEmpty()
                    orderby x.CreateDate descending
                    where
                              (string.IsNullOrEmpty(table.Id) || x.Id.Contains(table.Id)) &&
                              (string.IsNullOrEmpty(table.ProjectId) || x.ProjectId.Contains(table.ProjectId)) &&
                              (string.IsNullOrEmpty(table.CusBillCode) || x.CusBillCode.Contains(table.CusBillCode)) &&
                              (string.IsNullOrEmpty(table.WarehouseCode) || x.WarehouseCode.Contains(table.WarehouseCode)) &&
                              (string.IsNullOrEmpty(table.CreateMan) || x.CreateMan.Contains(table.CreateMan)) &&
                              (string.IsNullOrEmpty(table.OutputMasterId) || x.OutputMasterId.Contains(table.OutputMasterId)) &&
                              (string.IsNullOrEmpty(table.ReqUnitId) || x.ReqUnitId.Contains(table.ReqUnitId)) &&
                              (string.IsNullOrEmpty(table.UnitWorkId) || x.WeldTaskId.Contains(table.UnitWorkId)) &&
                              (string.IsNullOrEmpty(table.WeldTaskId) || x.WeldTaskId.Contains(table.WeldTaskId)) &&
                              (table.InOutType == null || x.InOutType == table.InOutType) &&
                              (table.TypeInt == null || x.TypeInt == table.TypeInt) &&
                              (table.Category == null || x.Category == table.Category) &&
                              (table.State == null || x.State == table.State)
                    select new Model.Tw_InOutMasterOutput
                    {
                        Id = x.Id,
                        ProjectId = x.ProjectId,
                        CusBillCode = x.CusBillCode,
                        WarehouseCode = x.WarehouseCode,
                        Source = x.Source,
                        InOutType = x.InOutType,
                        TypeInt = x.TypeInt,
                        State = x.State,
                        Category = x.Category,
                        CreateMan = x.CreateMan,
                        CreateManName = person.PersonName,
                        CreateDate = x.CreateDate,
                        OutputMasterId = x.OutputMasterId,
                        WeldTaskId = x.WeldTaskId,
                        ReqUnitId = x.ReqUnitId,
                        ReqUnitName = unit.UnitName,
                        UnitWorkId = y.UnitWorkId,
                        WeldTaskCode = y.TaskCode,
                        AuditMan = x.AuditMan,
                        AuditManName = auditperson.PersonName,
                        AuditDate = x.AuditDate,
                        Remark = x.Remark,
                        AuditMan2 = x.AuditMan2,
                        AuditManName2 = auditperson2.PersonName,
                        AuditDate2 = x.AuditDate2,
                        WarehouseMan = x.WarehouseMan,
                        WarehouseDate = x.WarehouseDate,
                        WarehouseManName = warehouseperson.PersonName,
                        PipeLineSortIndex = y.PipeLineSortIndex

                    }
                  ;

            return q;
        }

        /// <summary>
        /// 获取分页列表
        /// </summary>
        /// <param name="table"></param>
        /// <param name="grid1"></param>
        /// <returns></returns>

        public static List<Tw_InOutMasterOutput> GetListData(Model.Tw_InOutMasterOutput table)
        {

            var q = GetModle(table);
            Count = q.Count();
            if (Count == 0)
            {
                return null;
            }
            var result = q.ToList();
            // q = SortConditionHelper.SortingAndPaging(q, Grid1.SortField, Grid1.SortDirection, Grid1.PageIndex, Grid1.PageSize);
            return (from x in result
                    select new Model.Tw_InOutMasterOutput
                    {
                        Id = x.Id,
                        ProjectId = x.ProjectId,
                        CusBillCode = x.CusBillCode,
                        WarehouseCode = x.WarehouseCode,
                        Source = x.Source,
                        InOutType = x.InOutType,
                        TypeInt = x.TypeInt,
                        Category = x.Category,
                        State = x.State,
                        CreateMan = x.CreateMan,
                        CreateManName = x.CreateManName,
                        CreateDate = x.CreateDate,
                        OutputMasterId = x.OutputMasterId,
                        WeldTaskId = x.WeldTaskId,
                        ReqUnitId = x.ReqUnitId,
                        ReqUnitName = x.ReqUnitName,
                        UnitWorkId = x.UnitWorkId,
                        WeldTaskCode = x.WeldTaskId != null ? x.WeldTaskId.Contains('|') ? Funs.DB.HJGL_WeldTask.FirstOrDefault(e => e.UnitWorkId == x.WeldTaskId.Split('|')[0].ToString() && e.UnitId == x.WeldTaskId.Split('|')[1].ToString() && e.TaskDate.Value.Date == DateTime.ParseExact(x.WeldTaskId.Split('|')[2].ToString(), "yyyyMMdd", null).Date)?.TaskCode : "" : "",
                        CategoryString = TwConst.CategoryMap.FirstOrDefault(y => y.Value == x.Category).Key,
                        TypeString = TwConst.TypeIntMap.FirstOrDefault(y => y.Value == x.TypeInt).Key,
                        StateString = TwConst.StateMap.FirstOrDefault(y => y.Value == x.State).Key,
                        AuditMan = x.AuditMan,
                        AuditManName = x.AuditManName,
                        AuditDate = x.AuditDate,
                        Remark = x.Remark,
                        AuditMan2 = x.AuditMan2,
                        AuditManName2 = x.AuditManName2,
                        AuditDate2 = x.AuditDate2,
                        WarehouseMan = x.WarehouseMan,
                        WarehouseDate = x.WarehouseDate,
                        WarehouseManName = x.WarehouseManName,
                        PipeLineSortIndex = x.PipeLineSortIndex,
                    }).ToList();
        }

        public static IEnumerable GetListData(Model.Tw_InOutMasterOutput table, Grid grid1)
        {

            var q = GetModle(table);
            Count = q.Count();
            if (Count == 0)
            {
                return null;
            }
            var result = q.Skip(grid1.PageSize * grid1.PageIndex).Take(grid1.PageSize).ToList();
            // q = SortConditionHelper.SortingAndPaging(q, Grid1.SortField, Grid1.SortDirection, Grid1.PageIndex, Grid1.PageSize);
            return from x in result

                   select new Model.Tw_InOutMasterOutput
                   {
                       Id = x.Id,
                       ProjectId = x.ProjectId,
                       CusBillCode = x.CusBillCode,
                       WarehouseCode = x.WarehouseCode,
                       Source = x.Source,
                       InOutType = x.InOutType,
                       TypeInt = x.TypeInt,
                       Category = x.Category,
                       State = x.State,
                       CreateMan = x.CreateMan,
                       CreateManName = x.CreateManName,
                       CreateDate = x.CreateDate,
                       OutputMasterId = x.OutputMasterId,
                       WeldTaskId = x.WeldTaskId,
                       ReqUnitId = x.ReqUnitId,
                       ReqUnitName = x.ReqUnitName,
                       UnitWorkId = x.UnitWorkId,
                       WeldTaskCode = GetWeldTaskCode(x.WeldTaskId),
                       CategoryString = TwConst.CategoryMap.FirstOrDefault(y => y.Value == x.Category).Key,
                       TypeString = TwConst.TypeIntMap.FirstOrDefault(y => y.Value == x.TypeInt).Key,
                       StateString = TwConst.StateMap.FirstOrDefault(y => y.Value == x.State).Key,
                       AuditMan = x.AuditMan,
                       AuditManName = x.AuditManName,
                       AuditDate = x.AuditDate,
                       Remark = x.Remark,
                       AuditMan2 = x.AuditMan2,
                       AuditManName2 = x.AuditManName2,
                       AuditDate2 = x.AuditDate2,
                       WarehouseMan = x.WarehouseMan,
                       WarehouseDate = x.WarehouseDate,
                       WarehouseManName = x.WarehouseManName
                   };
        }

        public static string GetWeldTaskCode(string WeldTaskId)
        {
            string result = String.Empty;

            if (string.IsNullOrEmpty(WeldTaskId)) return result;

            if (WeldTaskId.Split('|').Length == 3) //用于处理历史数据
            {
                result = (from x in Funs.DB.HJGL_WeldTask
                          where x.UnitWorkId == WeldTaskId.Split('|')[0].ToString()
                                && x.UnitId == WeldTaskId.Split('|')[1].ToString()
                                && x.TaskDate.Value.Date ==
                                DateTime.ParseExact(WeldTaskId.Split('|')[2].ToString(), "yyyyMMdd", null)
                          select x.TaskCode).FirstOrDefault()
                    ?.ToString();

            }
            else if (WeldTaskId.Split('|').Length == 4)
            {
                result = (from x in Funs.DB.HJGL_WeldTask
                          where x.UnitWorkId == WeldTaskId.Split('|')[0].ToString()
                                && x.UnitId == WeldTaskId.Split('|')[1].ToString()
                                && x.TaskDate.Value.Date ==
                                DateTime.ParseExact(WeldTaskId.Split('|')[2].ToString(), "yyyyMMdd", null)
                                && x.SerialNumber == WeldTaskId.Split('|')[3]
                          select x.TaskCode).FirstOrDefault()
                    ?.ToString();
            }

            return result;

        }

        #endregion

        /// <summary>
        /// 导入数据
        /// </summary>
        /// <param name="path"></param>
        /// <param name="projectid"></param>
        /// <param name="creatUserId"></param>
        /// <returns></returns>
        public static ResponeData ImportData(string OriFileName, string path, string projectid, string creatUserId)
        {
            var responeData = new ResponeData();
            List<Tw_InputDataIn> temeplateDtoIns;
            try
            {
                temeplateDtoIns = MiniExcel.Query<Tw_InputDataIn>(path, startCell: "A1").ToList();
            }
            catch (Exception ex)
            {
                responeData.code = 0;
                responeData.message = "模板错误:" + ex.ToString();
                return responeData;
            }

            #region 数据校验
            if (temeplateDtoIns.Count == 0)
            {
                responeData.code = 0;
                responeData.message = "导入数据为空！";
                return responeData;
            }
            var warehouseCodeList = temeplateDtoIns.Select(x => x.WarehouseCode).Distinct().ToList(); //获取导入文件的仓库编号
            string errorWarehouseCode = "";
            foreach (var item in warehouseCodeList)
            {
                if (!Base_WarehouseService.GetWarehouseList(projectid).Select(x => x.WarehouseName == item).Any())
                {
                    errorWarehouseCode += item + ",";
                }
            }

            if (!string.IsNullOrEmpty(errorWarehouseCode))
            {
                if (temeplateDtoIns.Count == 0)
                {
                    responeData.code = 0;
                    responeData.message = errorWarehouseCode + "仓库不存在！";
                    return responeData;
                }
            }
            var typeString = temeplateDtoIns.Select(x => x.TypeString).Distinct().ToList(); //获取导入文件的类型
            if (typeString.Where(x => string.IsNullOrEmpty(x)).Count() > 0)
            {
                responeData.code = 0;
                responeData.message = "导入数据中类型列不能为空！";
                return responeData;
            }
            if (typeString.Contains("采购入库") && typeString.Contains("其他入库"))
            {
                responeData.code = 0;
                responeData.message = errorWarehouseCode + "每次只能导入一种类型！";
                return responeData;
            }


            var materialCodeList = temeplateDtoIns.Select(x => x.MaterialCode).Distinct().ToList(); //获取导入文件的材料编码
            var IsExitMaterialCode =
                from x in Funs.DB.HJGL_MaterialCodeLib
                where materialCodeList.Contains(x.MaterialCode)
                select x.MaterialCode;
            if (IsExitMaterialCode.Count() < materialCodeList.Count)
            {
                var errorMaterialCode = materialCodeList.Except(IsExitMaterialCode.ToList());
                if (errorMaterialCode.Count() > 0)
                {
                    responeData.code = 0;
                    responeData.message = string.Join(",", errorMaterialCode) + "材料不存在！";
                    return responeData;
                }
            }
            string cusbilcode = GetDataInCusBillCode(projectid, UnitService.GetUnitCodeByUnitId(Person_PersonsService.GetPerson_PersonsById(creatUserId).UnitId), temeplateDtoIns.FirstOrDefault().TypeString);
            foreach (var item in temeplateDtoIns)
            {
                item.CusBillCode = cusbilcode;
            }
            /*var queryAll = new Tw_InOutMasterOutput()
            {
                ProjectId = projectid
            };
            var queryAllresult = GetModle(queryAll).Select(x => x.CusBillCode).Distinct().ToList();//查询所有的编号 
            var CusBillCodeList = temeplateDtoIns.Select(x => x.CusBillCode).Distinct().ToList(); //获取导入文件的编号
            var IsContain = CusBillCodeList.Intersect(queryAllresult).ToList(); //判断导入文件中是有已存在的编号
            if (IsContain.Count>0)
            {
                responeData.code = 0;
                responeData.message = string.Join(",", IsContain)+ "编号已存在！";
                return responeData;
            }*/
            var CusBillCodeList = temeplateDtoIns.Select(x => x.CusBillCode).Distinct().ToList(); //获取导入文件的编号
            #endregion
            //根据申请单编号分组插入数据
            foreach (var CusBillCode in CusBillCodeList)
            {
                var CusBillCodeDtoIns = temeplateDtoIns.Where(x => x.CusBillCode == CusBillCode).ToList();
                var FirstCusBillCodeDtoIns = temeplateDtoIns.FirstOrDefault(x => x.CusBillCode == CusBillCode);
                var mapper =
                    ObjectMapperManager.DefaultInstance.GetMapper<List<Tw_InputDataIn>, List<Model.Tw_InOutPlanMaster>>();
                var mapperDetail =
                    ObjectMapperManager.DefaultInstance.GetMapper<List<Tw_InputDataIn>, List<Tw_InOutPlanDetail>>();
                //通过映射实体赋值
                var twInOutPlanMaster = mapper.Map(CusBillCodeDtoIns).FirstOrDefault();
                var twInOutPlanDetails = mapperDetail.Map(CusBillCodeDtoIns.Where(x => !string.IsNullOrEmpty(x.MaterialCode) && !string.IsNullOrEmpty(x.PlanNum)).ToList());

                twInOutPlanMaster.Id = SQLHelper.GetNewID();
                twInOutPlanMaster.InOutType = (int)TwConst.InOutType.入库;
                twInOutPlanMaster.State = (int)TwConst.State.待审核;

                if ("采购入库".Equals(FirstCusBillCodeDtoIns.TypeString))
                {
                    twInOutPlanMaster.TypeInt = (int)TwConst.TypeInt.采购入库;

                }
                else if ("其他入库".Equals(FirstCusBillCodeDtoIns.TypeString))
                {
                    twInOutPlanMaster.TypeInt = (int)TwConst.TypeInt.其他入库;
                }
                else
                {
                    twInOutPlanMaster.TypeInt = (int)TwConst.TypeInt.其他入库;
                }

                twInOutPlanMaster.Category = (int)TwConst.Category.全部;
                twInOutPlanMaster.ProjectId = projectid;
                twInOutPlanMaster.CreateMan = creatUserId;
                twInOutPlanMaster.CreateDate = DateTime.Now;
                twInOutPlanMaster.Remark = OriFileName;
                Add(twInOutPlanMaster);
                TwInOutplandetailService.AddList(twInOutPlanDetails, twInOutPlanMaster.Id); //插入入库明细

            }
            return responeData;

        }

        public static Model.Tw_InOutPlanMaster GetById(string Id)
        {
            return Funs.DB.Tw_InOutPlanMaster.FirstOrDefault(x => x.Id == Id);
        }
        public static void Add(Model.Tw_InOutPlanMaster newtable)
        {

            Model.Tw_InOutPlanMaster table = new Model.Tw_InOutPlanMaster
            {
                Id = newtable.Id,
                ProjectId = newtable.ProjectId,
                CusBillCode = newtable.CusBillCode,
                WarehouseCode = newtable.WarehouseCode,
                Source = newtable.Source,
                Category = newtable.Category,
                InOutType = newtable.InOutType,
                TypeInt = newtable.TypeInt,
                State = newtable.State,
                CreateMan = newtable.CreateMan,
                CreateDate = newtable.CreateDate,
                OutputMasterId = newtable.OutputMasterId,
                WeldTaskId = newtable.WeldTaskId,
                ReqUnitId = newtable.ReqUnitId,
                AuditMan = newtable.AuditMan,
                AuditDate = newtable.AuditDate,
                Remark = newtable.Remark,
                AuditMan2 = newtable.AuditMan2,
                AuditDate2 = newtable.AuditDate2,
                WarehouseMan = newtable.WarehouseMan,
                WarehouseDate = newtable.WarehouseDate,
            };
            Funs.DB.Tw_InOutPlanMaster.InsertOnSubmit(table);
            Funs.DB.SubmitChanges();
        }
        public static void Update(Model.Tw_InOutPlanMaster newtable)
        {

            Model.Tw_InOutPlanMaster table = Funs.DB.Tw_InOutPlanMaster.FirstOrDefault(x => x.Id == newtable.Id);
            if (table != null)
            {
                table.Id = newtable.Id;
                table.ProjectId = newtable.ProjectId;
                table.CusBillCode = newtable.CusBillCode;
                table.WarehouseCode = newtable.WarehouseCode;
                table.Category = newtable.Category;
                table.Source = newtable.Source;
                table.InOutType = newtable.InOutType;
                table.TypeInt = newtable.TypeInt;
                table.State = newtable.State;
                table.CreateMan = newtable.CreateMan;
                table.CreateDate = newtable.CreateDate;
                table.OutputMasterId = newtable.OutputMasterId;
                table.WeldTaskId = newtable.WeldTaskId;
                table.ReqUnitId = newtable.ReqUnitId;
                table.AuditMan = newtable.AuditMan;
                table.AuditDate = newtable.AuditDate;
                table.Remark = newtable.Remark;
                table.AuditMan2 = newtable.AuditMan2;
                table.AuditDate2 = newtable.AuditDate2;
                table.WarehouseMan = newtable.WarehouseMan;
                table.WarehouseDate = newtable.WarehouseDate;
                Funs.DB.SubmitChanges();
            }

        }
        public static void DeleteById(string Id)
        {

            Model.Tw_InOutPlanMaster table = Funs.DB.Tw_InOutPlanMaster.FirstOrDefault(x => x.Id == Id);
            if (table != null)
            {
                TwInOutplandetailService.DeleteByInOutPlanMasterId(table.Id);
                TwInoutplandetailRelationService.DeleteByInOutPlanMasterId(table.Id);

                Funs.DB.Tw_InOutPlanMaster.DeleteOnSubmit(table);
                Funs.DB.SubmitChanges();

            }

        }
        /// <summary>
        /// 根据出库单生成计划单
        /// </summary>
        /// <param name="outputMasterId"></param>
        /// <param name="typeInt"></param>
        /// <returns></returns>
        public static string GenPlanMasterByOutputMasterId(string outputMasterId, TwConst.TypeInt typeInt)
        {
            string message = "";

            #region 数据校验

            //获取出库单
            var outMasterQuery = new Tw_InOutMasterOutput();
            outMasterQuery.Id = outputMasterId;
            var outMaster = TwOutputmasterService.GetListData(outMasterQuery).FirstOrDefault();
            if (outMaster == null || outMaster.State != (int)TwConst.State.已完成)
            {
                message = "出库单状态错误,无法生成计划单！";
                return message;
            }
            //判断是否已经生成过计划单
            var queryIsExitInMaster = new Tw_InOutMasterOutput();
            queryIsExitInMaster.OutputMasterId = outMaster.Id;
            queryIsExitInMaster.TypeInt = (int)typeInt;
            var IsExitInMaster = GetModle(queryIsExitInMaster).FirstOrDefault();
            if (IsExitInMaster != null)
            {
                message = "该出库单已生成过计划单";
                return message;
            }
            //明细校验
            Tw_InOutDetailOutput query = new Tw_InOutDetailOutput();
            query.OutputMasterId = outputMasterId;
            var details = TwOutputdetailService.GetByModle(query).ToList();
            switch (typeInt)
            {
                case TwConst.TypeInt.补料出库:
                    details = details.Where(x => x.PlanNum > x.ActNum).ToList();
                    foreach (var item in details)
                    {
                        item.PlanNum = (item.PlanNum - item.ActNum);
                    }
                    if (details.Count == 0)
                    {
                        message = "该出库单无需补料";
                        return message;
                    }
                    break;
                case TwConst.TypeInt.退料入库:
                    details = details.Where(x => x.PlanNum < x.ActNum).ToList();
                    foreach (var item in details)
                    {
                        item.PlanNum = (item.ActNum - item.PlanNum);
                    }
                    if (details.Count == 0)
                    {
                        message = "该出库单无需退料";
                        return message;
                    }
                    break;
            }
            #endregion
            //生成计划单
            var planMasterModel = new Model.Tw_InOutMasterOutput()
            {
                Id = Guid.NewGuid().ToString(),
                OutputMasterId = outMaster.Id,
                ProjectId = outMaster.ProjectId,
                WarehouseCode = outMaster.WarehouseCode,
                Source = 2,
                Category = outMaster.Category,
                TypeInt = outMaster.TypeInt,
                State = (int)TwConst.State.已审核,
                CreateMan = outMaster.CreateMan,
                CreateDate = DateTime.Now,
                ReqUnitId = outMaster.ReqUnitId,
                WeldTaskId = GetById(outMaster.InOutPlanMasterId).WeldTaskId

            };
            switch (typeInt)
            {
                case TwConst.TypeInt.补料出库:
                    planMasterModel.CusBillCode = GetCusBillCodeByTaskCode(outMaster.WeldTaskCode, TwConst.TypeInt.补料出库, (BLL.TwConst.Category)planMasterModel.Category);
                    planMasterModel.TypeInt = (int)TwConst.TypeInt.补料出库;
                    planMasterModel.InOutType = (int)TwConst.InOutType.出库;
                    break;
                case TwConst.TypeInt.退料入库:
                    string pre = "";
                    pre += DateTime.Now.ToString("yyyyMMdd");
                    pre += UnitService.GetUnitCodeByUnitId(outMaster.ReqUnitId);
                    pre += "-" + UnitWorkService.getUnitWorkByUnitWorkId(outMaster.UnitWorkId)?.UnitWorkCode;
                    planMasterModel.CusBillCode = GetCusBillCodeByTaskCode(pre, TwConst.TypeInt.退料入库, (BLL.TwConst.Category)planMasterModel.Category);
                    planMasterModel.TypeInt = (int)TwConst.TypeInt.退料入库;
                    planMasterModel.InOutType = (int)TwConst.InOutType.入库;
                    ;
                    break;
            }
            Add(planMasterModel);
            //生成明细  
            TwInOutplandetailService.AddList(details, planMasterModel.Id);
            return message;
        }
        /// <summary>
        /// 获取出库申请单编号
        /// </summary>
        /// <param name="taskCode"></param>
        /// <param name="typeInt"></param>
        /// <param name="category"></param>
        /// <returns></returns>
        public static string GetCusBillCodeByTaskCode(string taskCode, TwConst.TypeInt typeInt, TwConst.Category category)
        {
            string cusBillCode = "";
            switch (typeInt)
            {
                case TwConst.TypeInt.领料出库:
                    if (category == TwConst.Category.管段)
                    {
                        cusBillCode = taskCode + "-AP-P01";
                    }
                    else if (category == TwConst.Category.管件)
                    {
                        cusBillCode = taskCode + "-AP-PF01";
                    }

                    break;
                case TwConst.TypeInt.补料出库:
                    if (category == TwConst.Category.管段)
                    {
                        cusBillCode = taskCode + "-GI-P01-AP01";
                    }
                    else if (category == TwConst.Category.管件)
                    {
                        cusBillCode = taskCode + "-GI-PF01-AP01";
                    }

                    break;
                case TwConst.TypeInt.退料入库:
                    if (category == TwConst.Category.管段)
                    {
                        cusBillCode = taskCode + "-GI-P01-RE01-GR01";
                    }
                    else if (category == TwConst.Category.管件)
                    {
                        cusBillCode = taskCode + "-GI-PF01-RE01-GR01";
                    }

                    break;
            }
            return cusBillCode;
        }

        public static Dictionary<string, string> GetWarehouseCode(string projectId)
        {
            var q = Base_WarehouseService.GetWarehouseList(projectId).Distinct().ToDictionary(x => x.WarehouseName, x => x.WarehouseName);
            return q;
        }
        public static string GetDataInCusBillCode(string projectid, string unitcode, string typeString, string unitWorkCode = "", string Category = "")
        {
            if (typeString == TwConst.TypeInt.其他入库.ToString())
            {
                //生成规则是20240919-unitcode-AP-GR01
                string cusBillCode = string.Format("{0:yyyyMMdd}", DateTime.Now);
                var queryAll = new Tw_InOutMasterOutput()
                {
                    ProjectId = projectid,
                    CusBillCode = cusBillCode,
                };
                var queryAllresult = GetModle(queryAll).Count();
                cusBillCode = cusBillCode + "-AP-" + (queryAllresult + 1).ToString().PadLeft(2, '0');
                return cusBillCode;
            }
            else if (typeString == TwConst.TypeInt.散件出库.ToString())
            {
                //生成规则是20240919-unitcode-AP-GR01
                string cusBillCode = string.Format("{0:yyyyMMdd}", DateTime.Now) + unitcode + "-" + unitWorkCode + "-";
                var queryAll = new Tw_InOutMasterOutput()
                {
                    ProjectId = projectid,
                    CusBillCode = cusBillCode,
                    Category = Category == TwConst.Category.管段.ToString() ? (int)TwConst.Category.管段 : (int)TwConst.Category.管件

                };
                var queryAllresult = GetModle(queryAll).Count();
                if (Category == TwConst.Category.管段.ToString())
                {
                    cusBillCode = cusBillCode + (queryAllresult + 1).ToString().PadLeft(2, '0') + "-AP-P01";
                }
                else
                {
                    cusBillCode = cusBillCode + (queryAllresult + 1).ToString().PadLeft(2, '0') + "-AP-PF01";

                }
                return cusBillCode;
            }
            else if (typeString == TwConst.TypeInt.其他出库.ToString())
            {
                //生成规则是20240919-01
                string cusBillCode = string.Format("{0:yyyyMMdd}", DateTime.Now);
                var queryAll = new Tw_InOutMasterOutput()
                {
                    ProjectId = projectid,
                    CusBillCode = cusBillCode,
                    TypeInt = (int)TwConst.TypeInt.其他出库,
                };
                var queryAllresult = GetModle(queryAll).Count();
                cusBillCode = cusBillCode + "-AP-" + (queryAllresult + 1).ToString().PadLeft(2, '0');
                return cusBillCode;
            }

            else
            {
                //生成规则是20240919-unitcode-AP-GR01
                string cusBillCode = string.Format("{0:yyyyMMdd}", DateTime.Now) + "-" + unitcode + "-AP-GR";
                var queryAll = new Tw_InOutMasterOutput()
                {
                    ProjectId = projectid,
                    CusBillCode = cusBillCode,
                };
                var queryAllresult = GetModle(queryAll).Count();
                cusBillCode = cusBillCode + (queryAllresult + 1).ToString().PadLeft(2, '0');
                return cusBillCode;
            }
        }

        /// <summary>
        /// 根据任务单生成出库计划单
        /// </summary>
        /// <param name="unitworkid"></param>
        /// <param name="unitid"></param>
        /// <param name="date"></param>
        /// <param name="Personid"></param>
        public static void GenOutPlanmasterByWeldTaskId(string unitworkid, string unitid, DateTime date, string serialNumber, string Personid)
        {
            Model.SGGLDB db = Funs.DB;
            Model.View_HJGL_WeldingTask weldTask = db.View_HJGL_WeldingTask.FirstOrDefault(e => e.UnitWorkId == unitworkid && e.UnitId == unitid && e.TaskDate.Value.Date == date.Date && e.SerialNumber == serialNumber);
            if (weldTask == null)
            {
                return;
            }
            string WeldTaskId = unitworkid + "|" + unitid + "|" + string.Format("{0:yyyyMMdd}", date) + "|" + serialNumber;
            //判断是否已经生成过出库计划单
            var queryIsExitInMaster = new Tw_InOutMasterOutput();
            queryIsExitInMaster.WeldTaskId = WeldTaskId;
            queryIsExitInMaster.InOutType = (int)TwConst.InOutType.出库;
            queryIsExitInMaster.TypeInt = (int)TwConst.TypeInt.领料出库;
            var IsExitInMaster = TwInOutplanmasterService.GetModle(queryIsExitInMaster).FirstOrDefault();
            if (IsExitInMaster != null)
            {
                return;
            }
            var pipelineList = db.View_HJGL_WeldingTask.Where(e => e.UnitWorkId == unitworkid && e.UnitId == unitid && e.TaskDate.Value.Date == date.Date && e.SerialNumber == serialNumber).OrderBy(x => x.PipeLineSortIndex).Select(x => x.PipelineId).Distinct().ToList();
            //领料出库需要排除散件材料
            var MaterDatial = from x in db.HJGL_PipeLineMat
                              join y in db.HJGL_MaterialCodeLib on x.MaterialCode equals y.MaterialCode
                              where pipelineList.Contains(x.PipelineId) && x.PrefabricatedComponents != null
                              select new
                              {
                                  x.PipelineId,
                                  x.PrefabricatedComponents,
                                  x.MaterialCode,
                                  x.Number,
                                  y.MaterialUnit,
                              };
            //var outMateriaList = from x in db.HJGL_PipeLineMat
            //    join y in db.HJGL_MaterialCodeLib on x.MaterialCode equals y.MaterialCode
            //    where pipelineList.Contains(x.PipelineId)
            //    group x by new { x.MaterialCode, y.MaterialUnit }
            //    into g
            //    select new
            //    {
            //        g.Key.MaterialCode,
            //        planNum = g.Sum(x => x.Number) ?? 0,
            //        MaterialName = g.Key.MaterialUnit,
            //    };
            var outMateriaList = from x in MaterDatial
                                 group x by new { x.MaterialCode, x.MaterialUnit }
                into g
                                 select new
                                 {
                                     g.Key.MaterialCode,
                                     planNum = g.Sum(x => x.Number) ?? 0,
                                     MaterialName = g.Key.MaterialUnit,
                                 };

            var outPlanDetailListPiece = outMateriaList.Where(x => x.MaterialName.Contains("个"));//管件
            var outPlanDetailListOthere = outMateriaList.Where(x => x.MaterialName.Contains("米"));//管段
            var weldTaskCode = WeldTaskService.GetWeldTaskById(weldTask.WeldTaskId)?.TaskCode;
            if (outPlanDetailListPiece.Any())
            {
                Model.Tw_InOutPlanMaster table = new Model.Tw_InOutPlanMaster
                {
                    Id = Guid.NewGuid().ToString(),
                    ProjectId = weldTask.ProjectId,
                    // CusBillCode = string.Format("{0:yyyyMMdd}", DateTime.Now) + UnitService.GetUnitCodeByUnitId(weldTask.UnitId) + "-" + UnitWorkService.getUnitWorkByUnitWorkId(weldTask.UnitWorkId)?.UnitWorkCode + "AP-PF01",
                    CusBillCode = TwInOutplanmasterService.GetCusBillCodeByTaskCode(weldTaskCode, TwConst.TypeInt.领料出库, TwConst.Category.管件),
                    WarehouseCode = BLL.Base_WarehouseService.GetWarehouseByWarehouseId(PipelineService.GetPipelineByPipelineId(weldTask.PipelineId).WarehouseId).WarehouseName,
                    Source = 1,
                    InOutType = (int)TwConst.InOutType.出库,
                    TypeInt = (int)TwConst.TypeInt.领料出库,
                    State = (int)TwConst.State.待审核,
                    Category = (int)TwConst.Category.管件,
                    CreateMan = Personid,
                    CreateDate = DateTime.Now,
                    WeldTaskId = WeldTaskId,
                    ReqUnitId = weldTask.UnitId,
                };
                TwInOutplanmasterService.Add(table);
                foreach (var item in outPlanDetailListPiece)
                {
                    Model.Tw_InOutPlanDetail detail = new Model.Tw_InOutPlanDetail
                    {
                        Id = Guid.NewGuid().ToString(),
                        InOutPlanMasterId = table.Id,
                        MaterialCode = item.MaterialCode,
                        PlanNum = item.planNum,
                    };
                    TwInOutplandetailService.Add(detail);
                }
                var twinoutplandetailRelationList = MaterDatial.ToList().Select(x => new Tw_InOutPlanDetail_Relation
                {
                    PipelineId = x.PipelineId,
                    MaterialCode = x.MaterialCode,
                    Number = x.Number,
                    PrefabricatedComponents = x.PrefabricatedComponents,
                }).ToList();
                TwInoutplandetailRelationService.AddList(twinoutplandetailRelationList, table.Id);
            }
            if (outPlanDetailListOthere.Any())
            {
                Model.Tw_InOutPlanMaster table = new Model.Tw_InOutPlanMaster
                {
                    Id = Guid.NewGuid().ToString(),
                    ProjectId = weldTask.ProjectId,
                    CusBillCode = TwInOutplanmasterService.GetCusBillCodeByTaskCode(weldTaskCode, TwConst.TypeInt.领料出库, TwConst.Category.管段),
                    WarehouseCode = BLL.Base_WarehouseService.GetWarehouseByWarehouseId(PipelineService.GetPipelineByPipelineId(weldTask.PipelineId).WarehouseId).WarehouseName,
                    Source = 1,
                    InOutType = (int)TwConst.InOutType.出库,
                    TypeInt = (int)TwConst.TypeInt.领料出库,
                    State = (int)TwConst.State.待审核,
                    Category = (int)TwConst.Category.管段,
                    CreateMan = Personid,
                    CreateDate = DateTime.Now,
                    WeldTaskId = WeldTaskId,
                    ReqUnitId = weldTask.UnitId,
                };
                TwInOutplanmasterService.Add(table);
                foreach (var item in outPlanDetailListOthere)
                {
                    Model.Tw_InOutPlanDetail detail = new Model.Tw_InOutPlanDetail
                    {
                        Id = Guid.NewGuid().ToString(),
                        InOutPlanMasterId = table.Id,
                        MaterialCode = item.MaterialCode,
                        PlanNum = item.planNum,
                    };
                    TwInOutplandetailService.Add(detail);
                }
                var twinoutplandetailRelationList = MaterDatial.ToList().Select(x => new Tw_InOutPlanDetail_Relation
                {
                    PipelineId = x.PipelineId,
                    MaterialCode = x.MaterialCode,
                    Number = x.Number,
                    PrefabricatedComponents = x.PrefabricatedComponents,
                }).ToList();
                TwInoutplandetailRelationService.AddList(twinoutplandetailRelationList, table.Id);
            }


        }


    }
}