using System;
using System.Collections.Generic;
using System.Data;
using System.Data.SqlClient;
using System.Diagnostics;
using System.Drawing.Imaging;
using System.IO;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Windows.Forms;
using BLL;
using Newtonsoft.Json.Linq;
using NPOI.HSSF.UserModel;
using NPOI.SS.UserModel;
using NPOI.SS.Util;
using NPOI.XSSF.Streaming;
using NPOI.XSSF.UserModel;
using BorderStyle = NPOI.SS.UserModel.BorderStyle;

namespace FineUIPro.Web.WeldingProcess.TestPackageManage
{
    public partial class TestPackageManageAudit : PageBase
    {
        #region 定义项
        /// <summary>
        /// 试压包主键
        /// </summary>
        public string PTP_ID
        {
            get
            {
                return (string)ViewState["PTP_ID"];
            }
            set
            {
                ViewState["PTP_ID"] = value;
            }
        }
        /// <summary>
        /// 未通过数
        /// </summary>
        public int Count
        {
            get
            {
                return (int)ViewState["Count"];
            }
            set
            {
                ViewState["Count"] = value;
            }
        }
        #endregion

        #region 加载页面
        /// <summary>
        /// 加载页面
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void Page_Load(object sender, EventArgs e)
        {
            if (!IsPostBack)
            {
                this.ddlPageSize.SelectedValue = this.Grid1.PageSize.ToString();
                this.PTP_ID = string.Empty;
                this.txtSearchDate.Text = string.Format("{0:yyyy-MM}", System.DateTime.Now);

                //打印报表项

                this.drpPrintTypeList.DataSource = BLL.Common_ReportPrintService.TestPackageSelectPrint();
                this.drpPrintTypeList.DataTextField = "Title";
                this.drpPrintTypeList.DataValueField = "Id";
                this.drpPrintTypeList.DataBind();
                Funs.FineUIPleaseSelect(this.drpPrintTypeList);

                // 审核人
                BLL.Project_UserService.InitProjectUserDropDownList(drpAuditMan, true, this.CurrUser.LoginProjectId, Resources.Lan.PleaseSelect);
                this.InitTreeMenu();//加载树               
            }
        }
        #endregion

        #region 加载树装置-单位-工作区
        /// <summary>
        /// 加载树
        /// </summary>
        private void InitTreeMenu()
        {
            this.tvControlItem.Nodes.Clear();
            TreeNode rootNode = new TreeNode();
            rootNode.Text = "单位-装置-月份";
            rootNode.NodeID = "0";
            rootNode.Expanded = true;
            this.tvControlItem.Nodes.Add(rootNode);
            DateTime startTime = Convert.ToDateTime(this.txtSearchDate.Text.Trim() + "-01");
            DateTime endTime = startTime.AddMonths(1);

            List<Model.Base_Unit> units = new List<Model.Base_Unit>(); ///单位
            var pUnit = BLL.Project_UnitService.GetProject_UnitByProjectIdUnitId(this.CurrUser.LoginProjectId, this.CurrUser.UnitId);

            if (pUnit == null || pUnit.UnitType == BLL.Const.UnitType_1 || pUnit.UnitType == BLL.Const.UnitType_2
                  || pUnit.UnitType == BLL.Const.UnitType_3 || pUnit.UnitType == BLL.Const.UnitType_4)
            {
                units = (from x in Funs.DB.Base_Unit
                         join y in Funs.DB.Project_Unit on x.UnitId equals y.UnitId
                         where y.ProjectId == this.CurrUser.LoginProjectId && y.UnitType.Contains(BLL.Const.UnitType_5)
                         select x).ToList();
            }
            else
            {
                units.Add(BLL.Base_UnitService.GetUnit(this.CurrUser.UnitId));
            }

            List<Model.PTP_TestPackage> testPackageLists = (from x in Funs.DB.PTP_TestPackage
                                                            where x.ProjectId == this.CurrUser.LoginProjectId && x.TableDate >= startTime && x.TableDate < endTime
                                                            select x).ToList();
            if (units != null)
            {
                foreach (var unit in units)
                {
                    TreeNode rootUnitNode = new TreeNode();//定义根节点
                    rootUnitNode.Text = unit.UnitName;
                    rootUnitNode.NodeID = unit.UnitId;
                    rootUnitNode.Expanded = true;
                    rootUnitNode.ToolTip = "施工单位";
                    rootNode.Nodes.Add(rootUnitNode);
                    var testPackageUnitList = testPackageLists.Where(x => x.UnitId == unit.UnitId).ToList();
                    this.BindNodes(rootUnitNode, testPackageUnitList);
                }
            }
            else
            {
                ShowNotify("请先增加施工单位！", MessageBoxIcon.Warning);
                return;
            }
        }
        #endregion

        #region 绑定树节点
        /// <summary>
        ///  绑定树节点
        /// </summary>
        /// <param name="node"></param>
        private void BindNodes(TreeNode node, List<Model.PTP_TestPackage> testPackageUnitList)
        {
            if (node.ToolTip == "施工单位")
            {
                var installId = (from x in testPackageUnitList
                                 where x.UnitId == node.NodeID
                                 select x.InstallationId).Distinct();
                if (installId.Count() > 0)
                {
                    var install = from x in Funs.DB.Project_Installation
                                  where installId.Contains(x.InstallationId)
                                  orderby x.InstallationCode
                                  select x;
                    foreach (var q in install)
                    {
                        TreeNode newNode = new TreeNode();
                        newNode.Text = q.InstallationName;
                        newNode.NodeID = q.InstallationId + "|" + node.NodeID;
                        newNode.ToolTip = "装置";
                        newNode.Expanded = true;
                        node.Nodes.Add(newNode);
                        this.BindNodes(newNode, testPackageUnitList);
                    }
                }
            }
            else if (node.ToolTip == "装置")
            {
                string installationId = Funs.GetStrListByStr(node.NodeID, '|')[0];
                var pointListMonth = (from x in testPackageUnitList
                                      where x.InstallationId == installationId
                                      select string.Format("{0:yyyy-MM}", x.TableDate)).Distinct();
                foreach (var item in pointListMonth)
                {
                    TreeNode newNode = new TreeNode();
                    newNode.Text = item;
                    newNode.NodeID = item + "|" + node.NodeID;
                    newNode.ToolTip = "月份";
                    node.Nodes.Add(newNode);
                    this.BindNodes(newNode, testPackageUnitList);
                }
            }
            //else if (node.ToolTip == "月份")
            //{
            //    string installationId = Funs.GetStrListByStr(node.ParentNode.NodeID, '|')[0]; 
            //    var days = (from x in testPackageUnitList
            //                where x.InstallationId == installationId
            //                orderby x.TableDate descending
            //                select x.TableDate).Distinct();
            //    foreach (var item in days)
            //    {
            //        TreeNode newNode = new TreeNode();
            //        newNode.Text = string.Format("{0:yyyy-MM-dd}", item);
            //        newNode.NodeID = item.ToString() + "|" + node.NodeID;
            //        newNode.ToolTip = "日期";
            //        node.Nodes.Add(newNode);
            //        this.BindNodes(newNode, testPackageUnitList);
            //    }
            //}
            else if (node.ToolTip == "月份")
            {
                DateTime startTime = Convert.ToDateTime(this.txtSearchDate.Text.Trim() + "-01");
                DateTime endTime = startTime.AddMonths(1);
                string installationId = Funs.GetStrListByStr(node.ParentNode.NodeID, '|')[0];
                var dReports = from x in testPackageUnitList
                               where x.InstallationId == installationId
                               && x.TableDate >= startTime && x.TableDate < endTime
                               orderby x.TestPackageNo descending
                               select x;
                foreach (var item in dReports)
                {
                    TreeNode newNode = new TreeNode();
                    if (!string.IsNullOrEmpty(item.TestPackageNo))
                    {
                        newNode.Text = item.TestPackageNo;
                    }
                    else
                    {
                        newNode.Text = "未知";
                    }
                    if (!item.AduditDate.HasValue || string.IsNullOrEmpty(item.Auditer))
                    {
                        newNode.Text = "<font color='#FF7575'>" + newNode.Text + "</font>";
                        node.Text = "<font color='#FF7575'>" + node.Text + "</font>";
                        node.ParentNode.Text = "<font color='#FF7575'>" + node.ParentNode.Text + "</font>";
                    }
                    newNode.NodeID = item.PTP_ID;
                    newNode.EnableClickEvent = true;
                    node.Nodes.Add(newNode);
                }
            }
        }
        #endregion

        #region 点击TreeView
        /// <summary>
        /// 点击TreeView
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void tvControlItem_NodeCommand(object sender, TreeCommandEventArgs e)
        {
            this.PTP_ID = tvControlItem.SelectedNodeID;
            this.BindGrid();
        }
        #endregion

        #region 数据绑定
        /// <summary>
        /// 数据绑定
        /// </summary>
        private void BindGrid()
        {
            this.SetTextTemp();
            this.PageInfoLoad(); ///页面输入保存信息
            string strSql = @"SELECT * FROM dbo.View_PTP_TestPackageAudit
                             WHERE ProjectId= @ProjectId AND PTP_ID=@PTP_ID";
            List<SqlParameter> listStr = new List<SqlParameter>();
            listStr.Add(new SqlParameter("@ProjectId", this.CurrUser.LoginProjectId));
            listStr.Add(new SqlParameter("@PTP_ID", this.PTP_ID));
            SqlParameter[] parameter = listStr.ToArray();
            DataTable tb = SQLHelper.GetDataTableRunText(strSql, parameter);
            // 2.获取当前分页数据
            //var table = this.GetPagedDataTable(Grid1, tb1);
            Grid1.RecordCount = tb.Rows.Count;
            var table = this.GetPagedDataTable(Grid1, tb);
            Grid1.DataSource = table;
            Grid1.DataBind();
            this.ShowGridItem();
        }

        /// <summary>
        /// 行颜色设置
        /// </summary>
        private void ShowGridItem()
        {
            Count = 0;
            int Count1 = 0, Count2 = 0, Count3 = 0, Count4 = 0;
            int rowsCount = this.Grid1.Rows.Count;
            for (int i = 0; i < rowsCount; i++)
            {
                int IsoInfoCount = Funs.GetNewIntOrZero(this.Grid1.Rows[i].Values[3].ToString()); //总焊口
                int IsoInfoCountT = Funs.GetNewIntOrZero(this.Grid1.Rows[i].Values[4].ToString()); //完成总焊口
                int CountS = Funs.GetNewIntOrZero(this.Grid1.Rows[i].Values[5].ToString()); ; //合格数
                int CountU = Funs.GetNewIntOrZero(this.Grid1.Rows[i].Values[6].ToString()); ; //不合格数
                decimal Rate = 0;
                bool convertible = decimal.TryParse(this.Grid1.Rows[i].Values[9].ToString(), out Rate); //应检测比例
                decimal Ratio = Funs.GetNewDecimalOrZero(this.Grid1.Rows[i].Values[10].ToString()); //实际检测比例

                if (IsoInfoCount > IsoInfoCountT) //未焊完
                {
                    Count1 += 1;
                    this.Grid1.Rows[i].RowCssClass = "Cyan";
                }
                else if (Rate > Ratio) //已焊完，未达检测比例
                {
                    Count2 += 1;
                    this.Grid1.Rows[i].RowCssClass = "Yellow";
                }
                else if (CountU > 0) //已焊完，已达检测比例，但有不合格
                {
                    Count3 += 1;
                    this.Grid1.Rows[i].RowCssClass = "Green";
                }
                else
                {
                    Count4 += 1;
                    this.Grid1.Rows[i].RowCssClass = "Purple";
                }
            }

            Count = Count1 + Count2 + Count2;
            this.lab1.Text = Count1.ToString();
            this.lab2.Text = Count2.ToString();
            this.lab3.Text = Count3.ToString();
            this.lab4.Text = Count4.ToString();
        }

        #region 加载页面输入保存信息
        /// <summary>
        /// 加载页面输入保存信息
        /// </summary>
        private void PageInfoLoad()
        {
            this.btnAudit.Hidden = true;
            this.btnCancelAudit.Hidden = true;
            var testPackageManage = BLL.TestPackageManageEditService.GetTestPackageByID(this.PTP_ID);
            if (testPackageManage != null)
            {
                this.txtTestPackageNo.Text = testPackageManage.TestPackageNo;
                //if (!string.IsNullOrEmpty(testPackageManage.UnitId))
                //{
                //    var unit = BLL.Base_UnitService.GetUnit(testPackageManage.UnitId);
                //    if (unit != null)
                //    {
                //        this.drpUnit.Text = unit.UnitName;
                //    }
                //}
                if (!string.IsNullOrEmpty(testPackageManage.InstallationId))
                {
                    var install = BLL.Project_InstallationService.GetProject_InstallationByInstallationId(testPackageManage.InstallationId);
                    if (install != null)
                    {
                        this.drpInstallation.Text = install.InstallationName;
                    }
                }

                this.txtTestPackageName.Text = testPackageManage.TestPackageName;
                //this.txtTestPackageCode.Text = testPackageManage.TestPackageCode;
                if (!string.IsNullOrEmpty(testPackageManage.TestType))
                {
                    var testType = BLL.Base_PressureService.GetPressureByPressureId(testPackageManage.TestType);
                    if (testType != null)
                    {
                        this.drpTestType.Text = testType.PressureName;
                    }
                }
                this.txtTestService.Text = testPackageManage.TestService;
                this.txtTestHeat.Text = testPackageManage.TestHeat;
                this.txtTestAmbientTemp.Text = testPackageManage.TestAmbientTemp;

                this.txtTestMediumTemp.Text = testPackageManage.TestMediumTemp;
                this.txtVacuumTestService.Text = testPackageManage.VacuumTestService;
                this.txtVacuumTestPressure.Text = testPackageManage.VacuumTestPressure;

                this.txtTightnessTestTime.Text = testPackageManage.TightnessTestTime;
                this.txtTightnessTestTemp.Text = testPackageManage.TightnessTestTemp;
                this.txtTightnessTest.Text = testPackageManage.TightnessTest;

                this.txtTestPressure.Text = testPackageManage.TestPressure;
                this.txtTestPressureTemp.Text = testPackageManage.TestPressureTemp;
                this.txtTestPressureTime.Text = testPackageManage.TestPressureTime;

                this.txtOperationMedium.Text = testPackageManage.OperationMedium;
                this.txtPurgingMedium.Text = testPackageManage.PurgingMedium;
                this.txtCleaningMedium.Text = testPackageManage.CleaningMedium;

                this.txtLeakageTestService.Text = testPackageManage.LeakageTestService;
                this.txtLeakageTestPressure.Text = testPackageManage.LeakageTestPressure;
                this.txtAllowSeepage.Text = testPackageManage.AllowSeepage;
                this.txtFactSeepage.Text = testPackageManage.FactSeepage;
                this.txtModifyDate.Text = string.Format("{0:yyyy-MM-dd}", testPackageManage.ModifyDate);
                if (!string.IsNullOrEmpty(testPackageManage.Modifier))
                {
                    var users = BLL.Sys_UserService.GetUsersByUserId(testPackageManage.Modifier);
                    if (users != null)
                    {
                        this.drpModifier.Text = users.UserName;
                    }
                }
                this.txtTableDate.Text = string.Format("{0:yyyy-MM-dd}", testPackageManage.TableDate);
                if (!string.IsNullOrEmpty(testPackageManage.Tabler))
                {
                    var users = BLL.Sys_UserService.GetUsersByUserId(testPackageManage.Tabler);
                    if (users != null)
                    {
                        this.drpTabler.Text = users.UserName;
                    }
                }
                this.txtRemark.Text = testPackageManage.Remark;

                this.txtAuditDate.Text = string.Format("{0:yyyy-MM-dd}", testPackageManage.AduditDate);
                if (!string.IsNullOrEmpty(testPackageManage.Auditer))
                {
                    this.drpAuditMan.SelectedValue = testPackageManage.Auditer;
                }

                if (string.IsNullOrEmpty(testPackageManage.Auditer) || !testPackageManage.AduditDate.HasValue)
                {
                    this.btnAudit.Hidden = false;
                    this.drpAuditMan.Enabled = true;
                    this.txtAuditDate.Enabled = true;
                }
                else
                {
                    this.btnCancelAudit.Hidden = false;
                    this.drpAuditMan.Enabled = false;
                    this.txtAuditDate.Enabled = false;
                }
            }
        }
        #endregion

        #region 清空输入框
        /// <summary>
        /// 清空输入框
        /// </summary>
        private void SetTextTemp()
        {
            this.txtTestPackageNo.Text = string.Empty;
            //this.drpUnit.Text = string.Empty;
            this.drpInstallation.Text = string.Empty;
            this.txtTestPackageName.Text = string.Empty;
            //this.txtTestPackageCode.Text = string.Empty;
            this.drpTestType.Text = string.Empty;
            this.txtTestService.Text = string.Empty;
            this.txtTestHeat.Text = string.Empty;
            this.txtTestAmbientTemp.Text = string.Empty;
            this.txtTestMediumTemp.Text = string.Empty;
            this.txtVacuumTestService.Text = string.Empty;
            this.txtVacuumTestPressure.Text = string.Empty;
            this.txtTightnessTestTime.Text = string.Empty;
            this.txtTightnessTestTemp.Text = string.Empty;
            this.txtTightnessTest.Text = string.Empty;
            this.txtTestPressure.Text = string.Empty;
            this.txtTestPressureTemp.Text = string.Empty;
            this.txtTestPressureTime.Text = string.Empty;
            this.txtOperationMedium.Text = string.Empty;
            this.txtPurgingMedium.Text = string.Empty;
            this.txtCleaningMedium.Text = string.Empty;
            this.txtLeakageTestService.Text = string.Empty;
            this.txtLeakageTestPressure.Text = string.Empty;
            this.txtAllowSeepage.Text = string.Empty;
            this.txtFactSeepage.Text = string.Empty;
            this.drpModifier.Text = string.Empty;
            this.txtModifyDate.Text = string.Empty;
            this.drpTabler.Text = string.Empty;
            this.txtTableDate.Text = string.Empty;
            this.txtRemark.Text = string.Empty;
            this.drpAuditMan.SelectedValue = BLL.Const._Null;
            this.txtAuditDate.Text = string.Empty;
        }
        #endregion
        #endregion

        #region 分页排序
        #region 页索引改变事件
        /// <summary>
        /// 页索引改变事件
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void Grid1_PageIndexChange(object sender, GridPageEventArgs e)
        {
            BindGrid();
        }
        #endregion

        #region 排序
        /// <summary>
        /// 排序
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void Grid1_Sort(object sender, GridSortEventArgs e)
        {
            BindGrid();
        }
        #endregion

        #region 分页选择下拉改变事件
        /// <summary>
        /// 分页选择下拉改变事件
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void ddlPageSize_SelectedIndexChanged(object sender, EventArgs e)
        {
            Grid1.PageSize = Convert.ToInt32(ddlPageSize.SelectedValue);
            BindGrid();
        }
        #endregion
        #endregion

        #region 试压包 审核事件
        #region 审核检测单
        /// <summary>
        /// 审核检测单
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void btnAudit_Click(object sender, EventArgs e)
        {
            if (CommonService.GetAllButtonPowerList(this.CurrUser.LoginProjectId, this.CurrUser.UserId, Const.TestPackageManageAuditMenuId, Const.BtnAuditing))
            {
                var updateTestPackage = BLL.TestPackageManageEditService.GetTestPackageByID(this.PTP_ID);
                if (updateTestPackage != null)
                {
                    if (Count == 0)
                    {
                        string isnoHot = BLL.TestPackageManageEditService.IsExistNoHotHardItem(this.PTP_ID);
                        if (string.IsNullOrEmpty(isnoHot))
                        {
                            string inspectionIsoRate = BLL.TestPackageManageEditService.InspectionIsoRate(this.PTP_ID);
                            if (string.IsNullOrEmpty(inspectionIsoRate))
                            {
                                if (!String.IsNullOrEmpty(this.txtAuditDate.Text) && this.drpAuditMan.SelectedValue != BLL.Const._Null)
                                {
                                    updateTestPackage.AduditDate = Funs.GetNewDateTime(this.txtAuditDate.Text);
                                    updateTestPackage.Auditer = this.drpAuditMan.SelectedValue;
                                    BLL.TestPackageManageAuditService.AuditTestPackage(updateTestPackage);
                                    this.InitTreeMenu();
                                    this.BindGrid();
                                    ShowNotify("审核完成！", MessageBoxIcon.Success);
                                }
                                else
                                {
                                    Alert.ShowInTop("请填写审核人和审核日期！", MessageBoxIcon.Warning);
                                }
                            }
                            else
                            {
                                Alert.ShowInTop(inspectionIsoRate, MessageBoxIcon.Warning);
                                return;
                            }
                        }
                        else
                        {
                            Alert.ShowInTop(isnoHot, MessageBoxIcon.Warning);
                            return;
                        }
                    }
                    else
                    {
                        Alert.ShowInTop("管线未全部通过不允许审核操作！", MessageBoxIcon.Warning);
                        return;
                    }
                }
                else
                {
                    Alert.ShowInTop("请选择要审核的单据！", MessageBoxIcon.Warning);
                    return;
                }
            }
            else
            {
                Alert.ShowInTop("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
                return;
            }
        }
        #endregion

        #region 取消审核检测单
        /// <summary>
        /// 取消审核检测单
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void btnCancelAudit_Click(object sender, EventArgs e)
        {
            if (CommonService.GetAllButtonPowerList(this.CurrUser.LoginProjectId, this.CurrUser.UserId, Const.TestPackageManageAuditMenuId, Const.BtnCancelAuditing))
            {
                var updateTestPackage = BLL.TestPackageManageEditService.GetTestPackageByID(this.PTP_ID);
                if (updateTestPackage != null)
                {
                    updateTestPackage.Auditer = null;
                    updateTestPackage.AduditDate = null;
                    BLL.TestPackageManageAuditService.AuditTestPackage(updateTestPackage);
                    this.InitTreeMenu();
                    this.BindGrid();
                    ShowNotify("取消审核完成！", MessageBoxIcon.Success);
                }
                else
                {
                    ShowNotify("请确认单据！", MessageBoxIcon.Warning);
                }
            }
            else
            {
                ShowNotify("您没有这个权限，请与管理员联系！", MessageBoxIcon.Warning);
            }
        }
        #endregion
        #endregion

        #region 关闭弹出窗口及刷新页面
        /// <summary>
        /// 关闭弹出窗口
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void Window1_Close(object sender, WindowCloseEventArgs e)
        {
            this.PTP_ID = this.hdPTP_ID.Text;
            this.BindGrid();
            this.InitTreeMenu();
            this.hdPTP_ID.Text = string.Empty;
        }

        /// <summary>
        /// 查询
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void Tree_TextChanged(object sender, EventArgs e)
        {
            this.InitTreeMenu();
            this.BindGrid();
        }
        #endregion        

        #region  试压包打印

        /// <summary>
        ///  试压包打印
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        protected void btnPrint_Click(object sender, EventArgs e)
        {
            var selectValArray = this.drpPrintTypeList.SelectedValueArray;
            if (selectValArray.Length <= 0)
            {
                Alert.ShowInTop("请选择打印报表！", MessageBoxIcon.Warning);
                return;
            }
            string selectValStr = string.Join(",", selectValArray).Replace("null,", "");
            if (selectValStr == "null")
            {
                Alert.ShowInTop("请选择打印报表！", MessageBoxIcon.Warning);
                return;
            }

            CreateDataExcel(selectValArray);
        }

        #region 绘画模版 
        //1-TP-01-试压包路径表UG-FW-001
        private void template1(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            #region 头部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 16, style, 0, 18, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 1 * 256);
            ws.SetColumnWidth(1, 1 * 256);
            ws.SetColumnWidth(2, 7 * 256);
            ws.SetColumnWidth(3, 7 * 256);
            ws.SetColumnWidth(4, 7 * 256);
            ws.SetColumnWidth(5, 12 * 256);
            ws.SetColumnWidth(6, 10 * 256);
            ws.SetColumnWidth(7, 10 * 256);
            ws.SetColumnWidth(8, 6 * 256);
            ws.SetColumnWidth(9, 10 * 256);
            ws.SetColumnWidth(10, 10 * 256);
            ws.SetColumnWidth(11, 6 * 256);
            ws.SetColumnWidth(12, 10 * 256);
            ws.SetColumnWidth(13, 10 * 256);
            ws.SetColumnWidth(14, 6 * 256);
            ws.SetColumnWidth(15, 10 * 256);
            ws.SetColumnWidth(16, 10 * 256);
            ws.SetColumnWidth(17, 6 * 256);
            ws.SetColumnWidth(18, 1 * 256);
            //设置前1-5行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;
            ws.GetRow(3).Height = 12 * 20;
            ws.GetRow(4).Height = 22 * 20;
            //插入图片  
            InsertImage(hssfworkbook, ws, 2, 2, 2, 3, img1, 1.3, 1.1);
            InsertImage(hssfworkbook, ws, 2, 4, 2, 5, img2, 1.4, 1.1);
            InsertImage(hssfworkbook, ws, 2, 14, 2, 15, img3, 1.6, 1.1);
            InsertImage(hssfworkbook, ws, 2, 16, 2, 17, img4, 1.6, 1.1);

            ws.GetRow(rowIndex + 2).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目 \r\n\t BASF(Guangdong) Integrated Project Citral Cluster");
            ws.GetRow(rowIndex + 2).GetCell(5).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true, "Times New Roman");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 5, 14));
            ws.GetRow(2).Height = 55 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 8, 1, 17));
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 26, true, true, "Arial");
            ws.GetRow(rowIndex + 5).GetCell(1).SetCellValue("管道试压包流转路径表 \r\n Piping Test Package Routing Form");
            ws.GetRow(rowIndex + 5).GetCell(1).CellStyle = setStyle;
            //设置6-10 行 行高度
            ws.GetRow(rowIndex + 5).Height = 25 * 20;
            ws.GetRow(rowIndex + 6).Height = 13 * 20;
            ws.GetRow(rowIndex + 7).Height = 27 * 20;
            ws.GetRow(rowIndex + 8).Height = 22 * 20;
            ws.GetRow(rowIndex + 9).Height = 15 * 20;

            ws.GetRow(rowIndex + 10).Height = 32 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 10, rowIndex + 10, 1, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 10, rowIndex + 10, 4, 5));
            ws.GetRow(rowIndex + 11).Height = 11 * 20;

            ws.GetRow(rowIndex + 10).GetCell(1).SetCellValue("试压包号\r\nTest Package No.");
            ws.GetRow(rowIndex + 10).GetCell(4).SetCellValue("UG-130-FW-HT-0001");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 12, rowIndex + 13, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 12, rowIndex + 13, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 12, rowIndex + 13, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 12, rowIndex + 13, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 12, rowIndex + 13, 15, 16));

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("ACTIVITY");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None,
                 BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial");
            ws.GetRow(rowIndex + 12).GetCell(6).SetCellValue("CC7");
            ws.GetRow(rowIndex + 12).GetCell(6).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None,
               BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial");
            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("JIANLI");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None,
             BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial");
            ws.GetRow(rowIndex + 12).GetCell(12).SetCellValue("WORLEY");
            ws.GetRow(rowIndex + 12).GetCell(12).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None,
           BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial");
            ws.GetRow(rowIndex + 12).GetCell(15).SetCellValue("BASF");
            ws.GetRow(rowIndex + 12).GetCell(15).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None,
           BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial");
            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 15, rowIndex + 65, style, 0, 18, true);

            for (int i = 15; i < 66; i++)
            {
                ws.GetRow(rowIndex + i).Height = 28 * 20;
            }

            var image1 = Server.MapPath("~/res/images/bsf/图片1.png");
            var image2 = Server.MapPath("~/res/images/bsf/图片2.png");
            var image3 = Server.MapPath("~/res/images/bsf/图片3.png");
            var image4 = Server.MapPath("~/res/images/bsf/图片4.png");
            var image5 = Server.MapPath("~/res/images/bsf/图片5.png");
            var image6 = Server.MapPath("~/res/images/bsf/图片6.png");
            var image7 = Server.MapPath("~/res/images/bsf/图片7.png");
            var image8 = Server.MapPath("~/res/images/bsf/图片8.png");
            var image9 = Server.MapPath("~/res/images/bsf/图片9.png");
            var image10 = Server.MapPath("~/res/images/bsf/图片10.png");
            InsertImage(hssfworkbook, ws, 15, 2, 17, 4, image1, 1.55, 1.32);
            InsertImage(hssfworkbook, ws, 18, 2, 20, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 21, 2, 23, 4, image2, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 24, 2, 26, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 27, 2, 29, 4, image3, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 30, 2, 33, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 33, 2, 35, 4, image4, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 36, 2, 38, 4, image10, 0.02, 2.27);


            InsertImage(hssfworkbook, ws, 39, 2, 41, 4, image5, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 42, 2, 44, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 45, 2, 47, 4, image6, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 48, 2, 50, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 51, 2, 53, 4, image7, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 54, 2, 55, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 57, 2, 59, 4, image8, 1.55, 1.12);
            InsertImage(hssfworkbook, ws, 60, 2, 62, 4, image10, 0.02, 2.27);

            InsertImage(hssfworkbook, ws, 63, 2, 65, 4, image9, 1.55, 1.12);

            //循环数据表格部分
            ws.GetRow(rowIndex + 15).Height = 30 * 20;
            ws.GetRow(rowIndex + 16).Height = 30 * 20;
            ws.GetRow(rowIndex + 17).Height = 30 * 20;

            #region 第一层签名
            ws.GetRow(rowIndex + 15).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 16).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 17).GetCell(5).SetCellValue("日期\r\nDATE");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 15, rowIndex + 15, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 15, rowIndex + 15, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 15, rowIndex + 15, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 15, rowIndex + 15, 15, 16), ws);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 16, rowIndex + 16, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 16, rowIndex + 16, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 16, rowIndex + 16, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 16, rowIndex + 16, 15, 16), ws);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 17, rowIndex + 17, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 17, rowIndex + 17, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 17, rowIndex + 17, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 17, rowIndex + 17, 15, 16), ws);
            #endregion

            #region 第二层签名
            ws.GetRow(rowIndex + 21).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 22).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 23).GetCell(5).SetCellValue("日期\r\nDATE");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 21, rowIndex + 21, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 21, rowIndex + 21, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 21, rowIndex + 21, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 21, rowIndex + 21, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 22, rowIndex + 22, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 22, rowIndex + 22, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 22, rowIndex + 22, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 22, rowIndex + 22, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 23, rowIndex + 23, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 23, rowIndex + 23, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 23, rowIndex + 23, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 23, rowIndex + 23, 15, 16), ws);
            #endregion

            #region 第三层签名
            ws.GetRow(rowIndex + 27).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 28).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 29).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 27, rowIndex + 27, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 27, rowIndex + 27, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 27, rowIndex + 27, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 27, rowIndex + 27, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 28, rowIndex + 28, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 28, rowIndex + 28, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 28, rowIndex + 28, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 28, rowIndex + 28, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 28, rowIndex + 28, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 28, rowIndex + 28, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 28, rowIndex + 28, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 28, rowIndex + 28, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 29, rowIndex + 29, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 29, rowIndex + 29, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 29, rowIndex + 29, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 29, rowIndex + 29, 15, 16), ws);
            #endregion

            #region 第四层签名
            ws.GetRow(rowIndex + 33).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 34).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 35).GetCell(5).SetCellValue("日期\r\nDATE");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 33, rowIndex + 33, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 33, rowIndex + 33, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 33, rowIndex + 33, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 33, rowIndex + 33, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 33, rowIndex + 33, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 33, rowIndex + 33, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 33, rowIndex + 33, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 33, rowIndex + 33, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 34, rowIndex + 34, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 34, rowIndex + 34, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 34, rowIndex + 34, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 34, rowIndex + 34, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 35, rowIndex + 35, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 35, rowIndex + 35, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 35, rowIndex + 35, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 35, rowIndex + 35, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 35, rowIndex + 35, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 35, rowIndex + 35, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 35, rowIndex + 35, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 35, rowIndex + 35, 15, 16), ws);
            #endregion

            #region 第五层签名
            ws.GetRow(rowIndex + 39).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 40).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 41).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 39, rowIndex + 39, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 39, rowIndex + 39, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 39, rowIndex + 39, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 39, rowIndex + 39, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 39, rowIndex + 39, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 39, rowIndex + 39, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 39, rowIndex + 39, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 39, rowIndex + 39, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 40, rowIndex + 40, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 40, rowIndex + 40, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 40, rowIndex + 40, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 40, rowIndex + 40, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 40, rowIndex + 40, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 40, rowIndex + 40, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 40, rowIndex + 40, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 40, rowIndex + 40, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 41, rowIndex + 41, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 41, rowIndex + 41, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 41, rowIndex + 41, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 41, rowIndex + 41, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 41, rowIndex + 41, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 41, rowIndex + 41, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 41, rowIndex + 41, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 41, rowIndex + 41, 15, 16), ws);
            #endregion

            #region 第六层签名
            ws.GetRow(rowIndex + 45).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 46).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 47).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 45, rowIndex + 45, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 45, rowIndex + 45, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 45, rowIndex + 45, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 45, rowIndex + 45, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 45, rowIndex + 45, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 45, rowIndex + 45, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 45, rowIndex + 45, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 45, rowIndex + 45, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 46, rowIndex + 46, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 46, rowIndex + 46, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 46, rowIndex + 46, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 46, rowIndex + 46, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 46, rowIndex + 46, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 46, rowIndex + 46, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 46, rowIndex + 46, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 46, rowIndex + 46, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 47, rowIndex + 47, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 47, rowIndex + 47, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 47, rowIndex + 47, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 47, rowIndex + 47, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 47, rowIndex + 47, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 47, rowIndex + 47, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 47, rowIndex + 47, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 47, rowIndex + 47, 15, 16), ws);
            #endregion

            #region 第七层签名
            ws.GetRow(rowIndex + 51).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 52).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 51, rowIndex + 51, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 51, rowIndex + 51, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 51, rowIndex + 51, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 51, rowIndex + 51, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 51, rowIndex + 51, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 51, rowIndex + 51, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 51, rowIndex + 51, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 51, rowIndex + 51, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 52, rowIndex + 52, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 52, rowIndex + 52, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 52, rowIndex + 52, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 52, rowIndex + 52, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 52, rowIndex + 52, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 52, rowIndex + 52, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 52, rowIndex + 52, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 52, rowIndex + 52, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 53, rowIndex + 53, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 53, rowIndex + 53, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 53, rowIndex + 53, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 53, rowIndex + 53, 15, 16), ws);
            #endregion

            #region 第八层签名
            ws.GetRow(rowIndex + 57).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 58).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 59).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 57, rowIndex + 57, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 57, rowIndex + 57, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 57, rowIndex + 57, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 57, rowIndex + 57, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 57, rowIndex + 57, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 57, rowIndex + 57, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 57, rowIndex + 57, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 57, rowIndex + 57, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 58, rowIndex + 58, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 58, rowIndex + 58, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 58, rowIndex + 58, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 58, rowIndex + 58, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 58, rowIndex + 58, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 58, rowIndex + 58, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 58, rowIndex + 58, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 58, rowIndex + 58, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 59, rowIndex + 59, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 59, rowIndex + 59, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 59, rowIndex + 59, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 59, rowIndex + 59, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 59, rowIndex + 59, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 59, rowIndex + 59, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 59, rowIndex + 59, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 59, rowIndex + 59, 15, 16), ws);
            #endregion

            #region  第九层签名
            ws.GetRow(rowIndex + 63).GetCell(5).SetCellValue("姓名\r\nNAME");
            ws.GetRow(rowIndex + 64).GetCell(5).SetCellValue("签名\r\nSIGNATURE");
            ws.GetRow(rowIndex + 65).GetCell(5).SetCellValue("日期\r\nDATE");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 63, rowIndex + 63, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 63, rowIndex + 63, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 63, rowIndex + 63, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 63, rowIndex + 63, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 63, rowIndex + 63, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 63, rowIndex + 63, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 63, rowIndex + 63, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 63, rowIndex + 63, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 64, rowIndex + 64, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 64, rowIndex + 64, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 64, rowIndex + 64, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 64, rowIndex + 64, 15, 16));

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 64, rowIndex + 64, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 64, rowIndex + 64, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 64, rowIndex + 64, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 64, rowIndex + 64, 15, 16), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 65, rowIndex + 65, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 65, rowIndex + 65, 9, 10));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 65, rowIndex + 65, 12, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 65, rowIndex + 65, 15, 16));
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 65, rowIndex + 65, 6, 7), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 65, rowIndex + 65, 9, 10), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 65, rowIndex + 65, 12, 13), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 65, rowIndex + 65, 15, 16), ws);
            #endregion


            #endregion

            #region 边框设置
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(1, 1, 1, 17), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(65, 65, 1, 17), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 65, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 65, 17, 17), ws);

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //6-TP-05-P&ID清单UG-FW-001 模版
        private void template6(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 14, style, 0, 17, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 3 * 256);
            ws.SetColumnWidth(1, 3 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 4 * 256);
            ws.SetColumnWidth(8, 8 * 256);
            ws.SetColumnWidth(9, 8 * 256);
            ws.SetColumnWidth(10, 8 * 256);
            ws.SetColumnWidth(11, 8 * 256);
            ws.SetColumnWidth(12, 1 * 256);
            ws.SetColumnWidth(13, 9 * 256);
            ws.SetColumnWidth(14, 9 * 256);
            ws.SetColumnWidth(15, 10 * 256);
            ws.SetColumnWidth(16, 6 * 256);
            ws.SetColumnWidth(17, 6 * 256);
            //设置前3行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;

            //设置3-15行的行高度
            for (int i = 3; i < 15; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
            }

            RegionUtil.SetBorderBottom(2, new CellRangeAddress(0, 0, 1, 1), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 1, 17, 17), ws);

            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 16, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 17, 17), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 2, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(2, 2, 2, 16), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 14, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 1, 1), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 16, 16), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 17, 17), ws);


            RegionUtil.SetBorderLeft(2, new CellRangeAddress(9, 14, 2, 2), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(7, 7, 2, 16), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(8, 8, 2, 16), ws);
            //插入图片  
            InsertImage(hssfworkbook, ws, 3, 2, 4, 3, img1, 1.2, 1.8);
            InsertImage(hssfworkbook, ws, 3, 3, 4, 4, img2, 1.9, 1.9);
            InsertImage(hssfworkbook, ws, 3, 13, 4, 14, img3, 1.5, 1.5);
            InsertImage(hssfworkbook, ws, 3, 15, 4, 16, img4, 1.5, 1.5);

            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 13));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("BASF (GUANGDONG) INTEGRATED PROJECT");
            ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 13));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("试压包流程图清单");
            ws.GetRow(rowIndex + 5).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 13));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("TEST PACKAGE P&ID DRAWING LIST");
            ws.GetRow(rowIndex + 6).GetCell(5).CellStyle = setStyle;

            var cellStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("Test Package No");
            ws.GetRow(rowIndex + 9).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("UG-130-FW-HT-001");
            ws.GetRow(rowIndex + 9).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("Area");
            ws.GetRow(rowIndex + 9).GetCell(9).CellStyle = cellStyle2;
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("C400");

            ws.GetRow(rowIndex + 10).GetCell(2).SetCellValue("试压包号");
            ws.GetRow(rowIndex + 10).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("区域");
            ws.GetRow(rowIndex + 10).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(2).SetCellValue("System No");
            ws.GetRow(rowIndex + 11).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("FIRE WATER");
            ws.GetRow(rowIndex + 11).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Test Pressure");
            ws.GetRow(rowIndex + 11).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(13).SetCellValue("2");
            ws.GetRow(rowIndex + 11).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("系统号");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("试验压力");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(9).SetCellValue("Test Type");
            ws.GetRow(rowIndex + 13).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(13).SetCellValue("Hydro Test");
            ws.GetRow(rowIndex + 13).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 14).GetCell(9).SetCellValue("试验方式");
            ws.GetRow(rowIndex + 14).GetCell(9).CellStyle = cellStyle2;

            #endregion

            #region  表格部分

            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, 15, rowIndex + 49, style, 0, 17, true);
            for (int i = 15; i < 50; i++)
            {
                ws.GetRow(i).Height = 20 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 13));
            }
            ws.GetRow(15).Height = 40 * 20;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 13));
            //数据表头部分
            ws.GetRow(rowIndex + 15).GetCell(2).SetCellValue("No\r\n序号");
            ws.GetRow(rowIndex + 15).GetCell(3).SetCellValue("P&ID Drawing No.\r\n流程图号");
            ws.GetRow(rowIndex + 15).GetCell(9).SetCellValue("Drawing Description\r\n图纸名称");
            ws.GetRow(rowIndex + 15).GetCell(14).SetCellValue("Rev\r\n版本");
            ws.GetRow(rowIndex + 15).GetCell(15).SetCellValue("Sheet No.\r\n页码");
            ws.GetRow(rowIndex + 15).GetCell(16).SetCellValue("Remark\r\n备注");

            #endregion

            #region 尾部

            //此处的尾部行数需要根据 得到的动态数据量 来计算，默认写死从50行开始。
            ws = ExcelCreateRow(ws, hssfworkbook, 49, rowIndex + 55, style, 0, 17, true);
            for (int i = 49; i <= 55; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
            }

            for (int i = 2; i < 17; i++)
            {
                ws.GetRow(rowIndex + 55).GetCell(i).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            }
            ws.GetRow(rowIndex + 55).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(16).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.None, BorderStyle.Medium);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 5, 6));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 7, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 10, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 14, 16));
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 2, 4));
            ws.GetRow(rowIndex + 53).GetCell(2).SetCellValue("PREPARED");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 5, 6));
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("REVIEW");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 7, 9));
            ws.GetRow(rowIndex + 53).GetCell(7).SetCellValue("JIANLI");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 10, 13));
            ws.GetRow(rowIndex + 53).GetCell(10).SetCellValue("Worley");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 14, 16));
            ws.GetRow(rowIndex + 53).GetCell(14).SetCellValue("BASF");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 54, rowIndex + 54, 2, 6));
            ws.GetRow(rowIndex + 54).GetCell(2).SetCellValue("CC7");
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //8-TP-06-单线图清单UG-FW-001 模版
        private void template8(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 14, style, 0, 17, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 3 * 256);
            ws.SetColumnWidth(1, 3 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 4 * 256);
            ws.SetColumnWidth(8, 8 * 256);
            ws.SetColumnWidth(9, 8 * 256);
            ws.SetColumnWidth(10, 8 * 256);
            ws.SetColumnWidth(11, 8 * 256);
            ws.SetColumnWidth(12, 1 * 256);
            ws.SetColumnWidth(13, 9 * 256);
            ws.SetColumnWidth(14, 9 * 256);
            ws.SetColumnWidth(15, 10 * 256);
            ws.SetColumnWidth(16, 6 * 256);
            ws.SetColumnWidth(17, 6 * 256);
            //设置前3行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;

            //设置3-15行的行高度
            for (int i = 3; i < 15; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
            }

            RegionUtil.SetBorderBottom(2, new CellRangeAddress(0, 0, 1, 1), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 1, 17, 17), ws);

            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 16, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 17, 17), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 2, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(2, 2, 2, 16), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 14, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 1, 1), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 16, 16), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 17, 17), ws);


            RegionUtil.SetBorderLeft(2, new CellRangeAddress(9, 14, 2, 2), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(7, 7, 2, 16), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(8, 8, 2, 16), ws);
            //插入图片  
            InsertImage(hssfworkbook, ws, 3, 2, 4, 3, img1, 1.2, 1.8);
            InsertImage(hssfworkbook, ws, 3, 3, 4, 4, img2, 1.9, 1.9);
            InsertImage(hssfworkbook, ws, 3, 13, 4, 14, img3, 1.5, 1.5);
            InsertImage(hssfworkbook, ws, 3, 15, 4, 16, img4, 1.5, 1.5);

            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 13));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("BASF (GUANGDONG) INTEGRATED PROJECT");
            ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 13));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("试压包单线图清单");
            ws.GetRow(rowIndex + 5).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 13));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("TEST PACKAGE ISOMETRIC LIST");
            ws.GetRow(rowIndex + 6).GetCell(5).CellStyle = setStyle;

            var cellStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("Test Package No");
            ws.GetRow(rowIndex + 9).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("UG-130-FW-HT-001");
            ws.GetRow(rowIndex + 9).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("Area");
            ws.GetRow(rowIndex + 9).GetCell(9).CellStyle = cellStyle2;
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("C400");

            ws.GetRow(rowIndex + 10).GetCell(2).SetCellValue("试压包号");
            ws.GetRow(rowIndex + 10).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("区域");
            ws.GetRow(rowIndex + 10).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(2).SetCellValue("System No");
            ws.GetRow(rowIndex + 11).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("FIRE WATER");
            ws.GetRow(rowIndex + 11).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Test Pressure");
            ws.GetRow(rowIndex + 11).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(13).SetCellValue("2");
            ws.GetRow(rowIndex + 11).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("系统号");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("试验压力");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(9).SetCellValue("Test Type");
            ws.GetRow(rowIndex + 13).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(13).SetCellValue("Hydro Test");
            ws.GetRow(rowIndex + 13).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 14).GetCell(9).SetCellValue("试验方式");
            ws.GetRow(rowIndex + 14).GetCell(9).CellStyle = cellStyle2;

            #endregion

            #region  表格部分

            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, 15, rowIndex + 49, style, 0, 17, true);
            for (int i = 15; i < 50; i++)
            {
                ws.GetRow(i).Height = 22 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 13));
            }
            ws.GetRow(15).Height = 30 * 20;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 13));
            //数据表头部分
            ws.GetRow(rowIndex + 15).GetCell(2).SetCellValue("No\r\n序号");
            ws.GetRow(rowIndex + 15).GetCell(3).SetCellValue("Isometric Drawing No.\r\n单线图号");
            ws.GetRow(rowIndex + 15).GetCell(9).SetCellValue("Line Number No\r\n 管线号");
            ws.GetRow(rowIndex + 15).GetCell(14).SetCellValue("Rev\r\n版本");
            ws.GetRow(rowIndex + 15).GetCell(15).SetCellValue("Sheet No.\r\n页码");
            ws.GetRow(rowIndex + 15).GetCell(16).SetCellValue("Remark\r\n备注");

            #endregion

            #region 尾部

            //此处的尾部行数需要根据 得到的动态数据量 来计算，默认写死从50行开始。
            ws = ExcelCreateRow(ws, hssfworkbook, 49, rowIndex + 55, style, 0, 17, true);
            for (int i = 49; i <= 55; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
            }

            for (int i = 2; i < 17; i++)
            {
                ws.GetRow(rowIndex + 55).GetCell(i).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            }
            ws.GetRow(rowIndex + 55).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(16).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.None, BorderStyle.Medium);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 5, 6));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 7, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 10, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 14, 16));
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 2, 4));
            ws.GetRow(rowIndex + 53).GetCell(2).SetCellValue("PREPARED");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 5, 6));
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("REVIEW");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 7, 9));
            ws.GetRow(rowIndex + 53).GetCell(7).SetCellValue("JIANLI");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 10, 13));
            ws.GetRow(rowIndex + 53).GetCell(10).SetCellValue("Worley");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 14, 16));
            ws.GetRow(rowIndex + 53).GetCell(14).SetCellValue("BASF");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 54, rowIndex + 54, 2, 6));
            ws.GetRow(rowIndex + 54).GetCell(2).SetCellValue("CC7");
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //11-TP-07-盲板清单UG-FW-001
        private void template11(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 14, style, 0, 17, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 1 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 10 * 256);
            ws.SetColumnWidth(8, 10 * 256);
            ws.SetColumnWidth(9, 11 * 256);
            ws.SetColumnWidth(10, 9 * 256);
            ws.SetColumnWidth(11, 8 * 256);
            ws.SetColumnWidth(12, 1 * 256);
            ws.SetColumnWidth(13, 9 * 256);
            ws.SetColumnWidth(14, 9 * 256);
            ws.SetColumnWidth(15, 9 * 256);
            ws.SetColumnWidth(16, 8 * 256);
            ws.SetColumnWidth(17, 1 * 256);
            //设置前3行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;

            //设置3-15行的行高度
            for (int i = 3; i < 15; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
            }

            RegionUtil.SetBorderBottom(2, new CellRangeAddress(0, 0, 1, 1), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 1, 17, 17), ws);

            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 16, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 17, 17), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 2, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(2, 2, 2, 16), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 14, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 1, 1), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 16, 16), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 17, 17), ws);


            RegionUtil.SetBorderLeft(2, new CellRangeAddress(9, 14, 2, 2), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(7, 7, 2, 16), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(8, 8, 2, 16), ws);
            //插入图片  
            InsertImage(hssfworkbook, ws, 3, 2, 4, 3, img1, 1.2, 1.8);
            InsertImage(hssfworkbook, ws, 3, 3, 4, 4, img2, 1.9, 1.9);
            InsertImage(hssfworkbook, ws, 3, 13, 4, 14, img3, 1.5, 1.5);
            InsertImage(hssfworkbook, ws, 3, 15, 4, 16, img4, 1.5, 1.5);

            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 13));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("BASF (GUANGDONG) INTEGRATED PROJECT");
            ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 13));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("试压包盲板清单");
            ws.GetRow(rowIndex + 5).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 13));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("TEST PACKAGE BLIND LIST");
            ws.GetRow(rowIndex + 6).GetCell(5).CellStyle = setStyle;

            var cellStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("Test Package No");
            ws.GetRow(rowIndex + 9).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("UG-130-FW-HT-001");
            ws.GetRow(rowIndex + 9).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("Area");
            ws.GetRow(rowIndex + 9).GetCell(9).CellStyle = cellStyle2;
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("C400");

            ws.GetRow(rowIndex + 10).GetCell(2).SetCellValue("试压包号");
            ws.GetRow(rowIndex + 10).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("区域");
            ws.GetRow(rowIndex + 10).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(2).SetCellValue("System No");
            ws.GetRow(rowIndex + 11).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("FIRE WATER");
            ws.GetRow(rowIndex + 11).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Test Pressure");
            ws.GetRow(rowIndex + 11).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(13).SetCellValue("2");
            ws.GetRow(rowIndex + 11).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("系统号");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("试验压力");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(9).SetCellValue("Test Type");
            ws.GetRow(rowIndex + 13).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(13).SetCellValue("Hydro Test");
            ws.GetRow(rowIndex + 13).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 14).GetCell(9).SetCellValue("试验方式");
            ws.GetRow(rowIndex + 14).GetCell(9).CellStyle = cellStyle2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 13));
            #endregion

            #region  表格部分


            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial");
            ws = ExcelCreateRow(ws, hssfworkbook, 15, rowIndex + 49, style, 0, 17, true);
            for (int i = 15; i < 50; i++)
            {
                ws.GetRow(i).Height = 22 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 13));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 14, 15));
            }
            ws.GetRow(15).Height = 40 * 20;
            //数据表头部分
            ws.GetRow(rowIndex + 15).GetCell(2).SetCellValue("No\r\n序号");
            ws.GetRow(rowIndex + 15).GetCell(3).SetCellValue("Isometric Drawing No.\r\n单线图号");
            ws.GetRow(rowIndex + 15).GetCell(7).SetCellValue("Blind No.\r\n盲板编号");
            ws.GetRow(rowIndex + 15).GetCell(8).SetCellValue("Inch\r\n尺寸");
            ws.GetRow(rowIndex + 15).GetCell(9).SetCellValue("Thick(mm)\r\n厚度");
            ws.GetRow(rowIndex + 15).GetCell(10).SetCellValue("Material\r\n材质");
            ws.GetRow(rowIndex + 15).GetCell(11).SetCellValue("Installed Date\r\n安装日期");
            ws.GetRow(rowIndex + 15).GetCell(14).SetCellValue("Removed Date\r\n拆除日期");
            ws.GetRow(rowIndex + 15).GetCell(16).SetCellValue("Remark\r\n备注");

            #endregion

            #region 尾部

            //此处的尾部行数需要根据 得到的动态数据量 来计算，默认写死从50行开始。
            ws = ExcelCreateRow(ws, hssfworkbook, 49, rowIndex + 55, style, 0, 17, true);
            for (int i = 49; i <= 55; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
            }

            for (int i = 2; i < 17; i++)
            {
                ws.GetRow(rowIndex + 55).GetCell(i).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            }
            ws.GetRow(rowIndex + 55).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(16).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.None, BorderStyle.Medium);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 5, 6));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 7, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 10, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 14, 16));
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 2, 4));
            ws.GetRow(rowIndex + 53).GetCell(2).SetCellValue("PREPARED");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 5, 6));
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("REVIEW");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 7, 9));
            ws.GetRow(rowIndex + 53).GetCell(7).SetCellValue("JIANLI");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 10, 13));
            ws.GetRow(rowIndex + 53).GetCell(10).SetCellValue("Worley");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 14, 16));
            ws.GetRow(rowIndex + 53).GetCell(14).SetCellValue("BASF");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 54, rowIndex + 54, 2, 6));
            ws.GetRow(rowIndex + 54).GetCell(2).SetCellValue("CC7");
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //13-弹簧支吊架安装检验记录SHT 3503-J403
        private void template13(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 1, style, 1, 7, true);
            ws.SetColumnWidth(0, 2 * 256);
            for (int i = 1; i < 8; i++)
            {
                ws.SetColumnWidth(i, 16 * 256);
            }
            ws.GetRow(rowIndex + 1).Height = 20 * 20 * 6;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 2));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503—J403");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 3, 5));
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("弹簧支/吊架安装检验记录\nSpring Support/Hanger Installation Inspection Record");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 6, 7));
            ws.GetRow(rowIndex + 1).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(6).SetCellValue(" 工程名称：\n Project Name:\n\n\n 单位工程名称：\n Unit Name:");

            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 2, rowIndex + 18, style, 1, 7, true);
            for (int i = 2; i < 19; i++)
            {
                if (i == 2)
                    ws.GetRow(rowIndex + i).Height = 20 * 20 * 4;
                else
                    ws.GetRow(rowIndex + i).Height = 20 * 20 * 2;
            }
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("管道编号/单线号\nPiping No./Line No.");
            ws.GetRow(rowIndex + 2).GetCell(2).SetCellValue("支/吊架位号\nSupport/Hanger Item No.");
            ws.GetRow(rowIndex + 2).GetCell(3).SetCellValue("结构型式\nType");
            ws.GetRow(rowIndex + 2).GetCell(4).SetCellValue("位移方向\nDisplacement Direction");
            ws.GetRow(rowIndex + 2).GetCell(5).SetCellValue("设计冷态负荷值\nDesign Cold Load");
            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("安装冷态负荷值\nInstallation Cold Load");
            ws.GetRow(rowIndex + 2).GetCell(7).SetCellValue("检查结果\nInspection Result");

            #endregion

            #region 尾部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 19, rowIndex + 21, style, 1, 7, true);

            ws.GetRow(rowIndex + 19).Height = 20 * 20 * 2;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 1, 7));
            ws.GetRow(rowIndex + 19).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 19).GetCell(1).SetCellValue(" 备注：\n Remarks:");

            ws.GetRow(rowIndex + 20).Height = 20 * 20 * 2;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 1, 2));
            ws.GetRow(rowIndex + 20).GetCell(1).SetCellValue("建设/监理单位\nOwner/JianLi Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 3, 5));
            ws.GetRow(rowIndex + 20).GetCell(3).SetCellValue("总 承 包 单 位\nGeneral Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 6, 7));
            ws.GetRow(rowIndex + 20).GetCell(6).SetCellValue("施 工 单 位\nConstruction Contractor");

            ws.GetRow(rowIndex + 21).Height = 20 * 20 * 6;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 1, 2));
            ws.GetRow(rowIndex + 21).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 21).GetCell(1).SetCellValue(" 专业工程师：\n Discipline Engineer:\n\n\n\n\n 日期(DATE)：    年   月   日");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 3, 5));
            ws.GetRow(rowIndex + 21).GetCell(3).CellStyle = style2;
            ws.GetRow(rowIndex + 21).GetCell(3).SetCellValue(" 专业工程师：\n Discipline Engineer:\n\n\n\n\n 日期(DATE)：    年   月   日");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 6, 7));
            ws.GetRow(rowIndex + 21).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 21).GetCell(6).SetCellValue(" 施工班组长：\n Foreman:\n 质量检查员：\n Quality Inspector:\n 专业工程师：\n Discipline Engineer: \n 日期(DATE)：    年   月   日");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //14-滑动固定管托安装检验记录SHT 3503-J404
        private void template14(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 1, style, 1, 7, true);
            ws.SetColumnWidth(0, 2 * 256);
            for (int i = 1; i < 8; i++)
            {
                ws.SetColumnWidth(i, 16 * 256);
            }
            ws.GetRow(rowIndex + 1).Height = 20 * 20 * 5;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 2));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503—J404");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 3, 5));
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("滑动/固定管托安装检验记录\nSliding/Fixed Pipe Shoe Installation Inspection Record");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 6, 7));
            ws.GetRow(rowIndex + 1).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(6).SetCellValue(" 工程名称：\n Project Name:\n\n\n 单位工程名称：\n Unit Name:");

            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 2, rowIndex + 14, style, 1, 7, true);
            for (int i = 2; i < 15; i++)
            {
                if (i == 2)
                    ws.GetRow(rowIndex + i).Height = 20 * 20 * 3;
                else
                    ws.GetRow(rowIndex + i).Height = 20 * 20 * 2;
            }
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("管道编号/单线号\nPiping No./ Line");
            ws.GetRow(rowIndex + 2).GetCell(2).SetCellValue("管托编号\nPipe Shoe No.");
            ws.GetRow(rowIndex + 2).GetCell(3).SetCellValue("型  式\nType");
            ws.GetRow(rowIndex + 2).GetCell(4).SetCellValue("位移方向\nDisplacement Direction");
            ws.GetRow(rowIndex + 2).GetCell(5).SetCellValue("设计位移量\nDesign Displacement");
            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("安装位移量\nInstallation Displacement");
            ws.GetRow(rowIndex + 2).GetCell(7).SetCellValue("检验结果\nInspection Result");

            #endregion

            #region 尾部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 15, rowIndex + 18, style, 1, 7, true);
            ws.GetRow(rowIndex + 15).Height = 20 * 20 * 3;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 1, 7));
            ws.GetRow(rowIndex + 15).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 15).GetCell(1).SetCellValue("  注：本表用于设计温度>350℃管道和低于-29℃管道中，管托有位移要求的滑动和固定管托的安装检验。\nNote: This form is applicable to the installation inspection on sliding/fixed pipe shoes with displacement requirement used in piping at a design temperature above 350℃and in piping at a design temperature below -29℃.");

            ws.GetRow(rowIndex + 16).Height = 20 * 20 * 3;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 1, 7));
            ws.GetRow(rowIndex + 16).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(1).SetCellValue(" 备注：\n Remarks:");

            ws.GetRow(rowIndex + 17).Height = 20 * 20 * 3;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 1, 2));
            ws.GetRow(rowIndex + 17).GetCell(1).SetCellValue("建设/监理单位\nOwner/JianLi Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 3, 5));
            ws.GetRow(rowIndex + 17).GetCell(3).SetCellValue("总 承 包 单 位\nGeneral Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 6, 7));
            ws.GetRow(rowIndex + 17).GetCell(6).SetCellValue("施 工 单 位\nConstruction Contractor");

            ws.GetRow(rowIndex + 18).Height = 20 * 20 * 6;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 1, 2));
            ws.GetRow(rowIndex + 18).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(1).SetCellValue(" 专业工程师：\n Discipline Engineer:\n\n\n\n\n 日期(DATE)：    年   月   日");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 3, 5));
            ws.GetRow(rowIndex + 18).GetCell(3).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(3).SetCellValue(" 专业工程师：\n Discipline Engineer:\n\n\n\n\n 日期(DATE)：    年   月   日");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 6, 7));
            ws.GetRow(rowIndex + 18).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(6).SetCellValue(" 施工班组长：\n Foreman:\n 质量检查员：\n Quality Inspector:\n 专业工程师：\n Discipline Engineer: \n 日期(DATE)：    年   月   日");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //15-管道补偿器安装检验记录SHT 3503-J405
        private void template15(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 3, style, 0, 12, true);

            //设置列宽
            ws.SetColumnWidth(0, 17 * 256);
            ws.SetColumnWidth(1, 12 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            ws.SetColumnWidth(3, 17 * 256);
            ws.SetColumnWidth(4, 14 * 256);
            ws.SetColumnWidth(5, 12 * 256);
            ws.SetColumnWidth(6, 15 * 256);
            ws.SetColumnWidth(7, 12 * 256);
            ws.SetColumnWidth(8, 13 * 256);
            ws.SetColumnWidth(9, 12 * 256);
            ws.SetColumnWidth(10, 12 * 256);
            ws.SetColumnWidth(11, 12 * 256);
            ws.SetColumnWidth(12, 12 * 256);

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 0, 1));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503-J405");

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 2, 9));
            ws.GetRow(rowIndex).GetCell(2).SetCellValue("管道补偿器安装检验记录\r\nPipe Compensator Installation Inspection Record");

            ws.AddMergedRegion(new CellRangeAddress(0, 0, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(1, 1, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(2, 2, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(3, 3, 10, 12));

            ws.GetRow(rowIndex).GetCell(10).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区");
            ws.GetRow(rowIndex + 1).GetCell(10).SetCellValue("Project Name:BASF (Guangdong) Integrated Project");
            ws.GetRow(rowIndex + 2).GetCell(10).SetCellValue("单位工程名称：埋地消防系统");
            ws.GetRow(rowIndex + 3).GetCell(10).SetCellValue("Unit Name：FW");



            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 4, rowIndex + 5, style, 0, 12, true);

            ws.GetRow(rowIndex + 4).Height = 30 * 20;
            ws.GetRow(rowIndex + 5).Height = 45 * 20;
            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 0, 0));
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("管道编号/单线号\r\nPiping No./Line No");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 1, 2));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("补偿器编号\r\nCompensator No.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 3, 3));
            ws.GetRow(rowIndex + 4).GetCell(3).SetCellValue("型式\r\nType");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 4, 4));
            ws.GetRow(rowIndex + 4).GetCell(4).SetCellValue("规格\r\nSpecification");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 5, 5));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("材质\r\nMaterial");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 6, 6));
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("固定支架间距\r\nFixed Support SoacingM");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 7, 7));
            ws.GetRow(rowIndex + 4).GetCell(7).SetCellValue("设计压力\r\nDesign Pressure");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 8, 8));
            ws.GetRow(rowIndex + 4).GetCell(8).SetCellValue("设计温度\r\nDesign Temperature\r\n℃");
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 9, 11));
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("轴/角向预变形量\r\nAxial/Angular Predeformation");
            ws.GetRow(rowIndex + 5).GetCell(9).SetCellValue("单位\r\nUnit");
            ws.GetRow(rowIndex + 5).GetCell(10).SetCellValue("设计值\r\nDesign Value");
            ws.GetRow(rowIndex + 5).GetCell(11).SetCellValue("实测值\r\nActual Value");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 12, 12));
            ws.GetRow(rowIndex + 4).GetCell(12).SetCellValue("检验结果\r\nInspection Result");

            //这里创建行数据
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 23, style, 0, 12, true);
            for (int i = 6; i < 24; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
            }

            #endregion

            #region 尾部
            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 24, rowIndex + 30, style, 0, 12, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 4, 8));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 9, 12));
            ws.GetRow(rowIndex + 24).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 24).GetCell(4).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 24).GetCell(9).SetCellValue("施工单位\r\nConstruction Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 1));
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 25).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 9, 12));
            ws.GetRow(rowIndex + 25).GetCell(9).SetCellValue("记录人 ：\r\nRecord Prepared by:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 9, 12));
            ws.GetRow(rowIndex + 27).GetCell(9).SetCellValue("质量检查员：\r\nQuality Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 9, 12));
            ws.GetRow(rowIndex + 27).GetCell(9).SetCellValue("焊接责任工程师：\r\nWelding Engineer:");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 3));
            ws.GetRow(rowIndex + 30).GetCell(0).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 4, 8));
            ws.GetRow(rowIndex + 30).GetCell(4).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 9, 12));
            ws.GetRow(rowIndex + 30).GetCell(9).SetCellValue("日期Date：            年          月         日");

            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 12), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 12, 12), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 12), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 3, 3), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 8, 8), ws);

            ws.GetRow(rowIndex + 26).Height = ws.GetRow(rowIndex + 28).Height = ws.GetRow(rowIndex + 29).Height = 7 * 20;
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //16-TP-08-静电接地清单UG-FW-001
        private void template16(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 14, style, 0, 17, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 1 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 10 * 256);
            ws.SetColumnWidth(8, 10 * 256);
            ws.SetColumnWidth(9, 11 * 256);
            ws.SetColumnWidth(10, 9 * 256);
            ws.SetColumnWidth(11, 8 * 256);
            ws.SetColumnWidth(12, 1 * 256);
            ws.SetColumnWidth(13, 9 * 256);
            ws.SetColumnWidth(14, 9 * 256);
            ws.SetColumnWidth(15, 9 * 256);
            ws.SetColumnWidth(16, 8 * 256);
            ws.SetColumnWidth(17, 1 * 256);
            //设置前3行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;

            //设置3-15行的行高度
            for (int i = 3; i < 15; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
            }

            RegionUtil.SetBorderBottom(2, new CellRangeAddress(0, 0, 1, 1), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 1, 17, 17), ws);

            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 16, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 17, 17), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 2, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(2, 2, 2, 16), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 14, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 1, 1), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 16, 16), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 17, 17), ws);


            RegionUtil.SetBorderLeft(2, new CellRangeAddress(9, 14, 2, 2), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(7, 7, 2, 16), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(8, 8, 2, 16), ws);
            //插入图片  
            InsertImage(hssfworkbook, ws, 3, 2, 4, 3, img1, 1.2, 1.8);
            InsertImage(hssfworkbook, ws, 3, 3, 4, 4, img2, 1.9, 1.9);
            InsertImage(hssfworkbook, ws, 3, 13, 4, 14, img3, 1.5, 1.5);
            InsertImage(hssfworkbook, ws, 3, 15, 4, 16, img4, 1.5, 1.5);

            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 13));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("BASF (GUANGDONG) INTEGRATED PROJECT");
            ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 13));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("管道静电接地清单");
            ws.GetRow(rowIndex + 5).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 13));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("LIST OF PIPING ELECTROSTATIC GROUNDING");
            ws.GetRow(rowIndex + 6).GetCell(5).CellStyle = setStyle;

            var cellStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("Test Package No");
            ws.GetRow(rowIndex + 9).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("UG-130-FW-HT-001");
            ws.GetRow(rowIndex + 9).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("Area");
            ws.GetRow(rowIndex + 9).GetCell(9).CellStyle = cellStyle2;
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("C400");

            ws.GetRow(rowIndex + 10).GetCell(2).SetCellValue("试压包号");
            ws.GetRow(rowIndex + 10).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("区域");
            ws.GetRow(rowIndex + 10).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(2).SetCellValue("System No");
            ws.GetRow(rowIndex + 11).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("FIRE WATER");
            ws.GetRow(rowIndex + 11).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Test Pressure");
            ws.GetRow(rowIndex + 11).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(13).SetCellValue("2");
            ws.GetRow(rowIndex + 11).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("系统号");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("试验压力");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(9).SetCellValue("Test Type");
            ws.GetRow(rowIndex + 13).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(13).SetCellValue("Hydro Test");
            ws.GetRow(rowIndex + 13).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 14).GetCell(9).SetCellValue("试验方式");
            ws.GetRow(rowIndex + 14).GetCell(9).CellStyle = cellStyle2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 13));
            #endregion

            #region  表格部分


            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, 15, rowIndex + 49, style, 0, 17, true);
            for (int i = 15; i < 50; i++)
            {
                ws.GetRow(i).Height = 20 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 7));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 8, 9));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 10, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 15));
            }
            ws.GetRow(15).Height = 28 * 20;
            //数据表头部分
            ws.GetRow(rowIndex + 15).GetCell(2).SetCellValue("No\r\n序号");
            ws.GetRow(rowIndex + 15).GetCell(3).SetCellValue("Isometric Drawing No\r\n单线图号");
            ws.GetRow(rowIndex + 15).GetCell(8).SetCellValue("接头型式\r\nConnection Type");
            ws.GetRow(rowIndex + 15).GetCell(10).SetCellValue("规格\r\nSpecification");
            ws.GetRow(rowIndex + 15).GetCell(13).SetCellValue("材质\r\nMaterial");
            ws.GetRow(rowIndex + 15).GetCell(16).SetCellValue("Remark\r\n备注");

            #endregion

            #region 尾部

            //此处的尾部行数需要根据 得到的动态数据量 来计算，默认写死从50行开始。
            ws = ExcelCreateRow(ws, hssfworkbook, 49, rowIndex + 55, style, 0, 17, true);
            for (int i = 49; i <= 55; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
            }

            for (int i = 2; i < 17; i++)
            {
                ws.GetRow(rowIndex + 55).GetCell(i).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            }
            ws.GetRow(rowIndex + 55).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(16).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.None, BorderStyle.Medium);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 5, 6));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 7, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 10, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 14, 16));
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 2, 4));
            ws.GetRow(rowIndex + 53).GetCell(2).SetCellValue("PREPARED");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 5, 6));
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("REVIEW");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 7, 9));
            ws.GetRow(rowIndex + 53).GetCell(7).SetCellValue("JIANLI");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 10, 13));
            ws.GetRow(rowIndex + 53).GetCell(10).SetCellValue("Worley");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 14, 16));
            ws.GetRow(rowIndex + 53).GetCell(14).SetCellValue("BASF");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 54, rowIndex + 54, 2, 6));
            ws.GetRow(rowIndex + 54).GetCell(2).SetCellValue("CC7");
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //17-管道焊接接头热处理报告SHT 3503-J411
        private void template17(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 3, style, 1, 12, true);
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 13 * 256);
            ws.SetColumnWidth(2, 12 * 256);
            ws.SetColumnWidth(3, 12 * 256);
            ws.SetColumnWidth(4, 10 * 256);
            ws.SetColumnWidth(5, 10 * 256);
            ws.SetColumnWidth(6, 10 * 256);
            ws.SetColumnWidth(7, 10 * 256);
            ws.SetColumnWidth(8, 12 * 256);
            ws.SetColumnWidth(9, 12 * 256);
            ws.SetColumnWidth(10, 12 * 256);
            ws.SetColumnWidth(11, 15 * 256);
            ws.SetColumnWidth(12, 15 * 256);

            ws.GetRow(rowIndex + 1).Height = 18 * 20 * 5;
            ws.GetRow(rowIndex + 2).Height = 18 * 20;
            ws.GetRow(rowIndex + 3).Height = 18 * 20 * 3;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 4));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503—J411-1");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 5, 8));
            ws.GetRow(rowIndex + 1).GetCell(5).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(5).SetCellValue("管道焊接接头热处理报告\nPiping Welded Joint Heat Treatment Report  ");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 9, 12));
            ws.GetRow(rowIndex + 1).GetCell(9).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(9).SetCellValue("工程名称:\nProject Name:\n\n\n单位工程名称:\nUnit Name:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 2, 12));
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("Report No.");

            ws.GetRow(rowIndex + 3).GetCell(1).SetCellValue("Heat Treatment Method");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 2, 6));
            ws.GetRow(rowIndex + 3).GetCell(7).SetCellValue("Heat Treatment Equipment");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 8, 12));

            #endregion           

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 4, rowIndex + 12, style, 1, 12, true);
            for (int i = 4; i < 13; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
                if (4 == i)
                {
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 1, 1));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 2, 2));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 3, 3));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 5));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 7));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 8, 8));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 9, 9));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 10, 10));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 11, 11));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 12, 12));
                }
                if (5 == i)
                    continue;
            }
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("Piping No./Line No.");
            ws.GetRow(rowIndex + 4).GetCell(2).SetCellValue("Weld No.");
            ws.GetRow(rowIndex + 4).GetCell(3).SetCellValue("Temp. Measuring Point No.");
            ws.GetRow(rowIndex + 4).GetCell(4).SetCellValue("HT Temperature ℃");
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("Holding Time h");
            ws.GetRow(rowIndex + 4).GetCell(8).SetCellValue("Material");
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("Specification");
            ws.GetRow(rowIndex + 4).GetCell(10).SetCellValue("Heat Treatment Date");
            ws.GetRow(rowIndex + 4).GetCell(11).SetCellValue("Recording Curve No.");
            ws.GetRow(rowIndex + 4).GetCell(12).SetCellValue("Hardness Report No.");

            ws.GetRow(rowIndex + 5).GetCell(4).SetCellValue("Required");
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("Actual");
            ws.GetRow(rowIndex + 5).GetCell(6).SetCellValue("Required");
            ws.GetRow(rowIndex + 5).GetCell(7).SetCellValue("Actual");

            #endregion

            #region 尾部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 13, rowIndex + 15, style, 1, 12, true);
            ws.GetRow(rowIndex + 13).Height = 18 * 20;
            ws.GetRow(rowIndex + 14).Height = 18 * 20;
            ws.GetRow(rowIndex + 15).Height = 18 * 20 * 4;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 13, rowIndex + 13, 1, 12));
            ws.GetRow(rowIndex + 13).GetCell(1).SetCellValue("Conclusion:");
            ws.GetRow(rowIndex + 13).GetCell(1).CellStyle = style2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 1, 3));
            ws.GetRow(rowIndex + 14).GetCell(1).SetCellValue("Owner/Supervision Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 4, 6));
            ws.GetRow(rowIndex + 14).GetCell(4).SetCellValue("General Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 7, 9));
            ws.GetRow(rowIndex + 14).GetCell(7).SetCellValue("Construction Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 10, 12));
            ws.GetRow(rowIndex + 14).GetCell(10).SetCellValue("Heat Treatment Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 1, 3));
            ws.GetRow(rowIndex + 15).GetCell(1).SetCellValue(" Discipline Engineer:\n\n\n\n Date:");
            ws.GetRow(rowIndex + 15).GetCell(1).CellStyle = style2;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 4, 6));
            ws.GetRow(rowIndex + 15).GetCell(4).SetCellValue(" Discipline Engineer:\n\n\n\n Date:");
            ws.GetRow(rowIndex + 15).GetCell(4).CellStyle = style2;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 7, 9));
            ws.GetRow(rowIndex + 15).GetCell(7).SetCellValue(" Foreman:\n Quality Inspector:\n Discipline Engineer:\n\n Date:");
            ws.GetRow(rowIndex + 15).GetCell(7).CellStyle = style2;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 10, 12));
            ws.GetRow(rowIndex + 15).GetCell(10).SetCellValue(" Operator:\n Discipline Engineer:\n\n\n Date:");
            ws.GetRow(rowIndex + 15).GetCell(10).CellStyle = style2;
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //18-金属材料化学成分检验报告SHT 3503-J129
        private void template18(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 4, style, 1, 15, true);
            ws.SetColumnWidth(0, 2 * 256);
            for (int i = 1; i < 16; i++)
            {
                if (i == 3 || i == 4)
                    ws.SetColumnWidth(i, 4 * 256);
                else if (i == 15)
                    ws.SetColumnWidth(i, 8 * 256);
                else
                    ws.SetColumnWidth(i, 5 * 256);
            }
            ws.GetRow(rowIndex + 1).Height = 20 * 20 * 6;
            for (int i = 2; i < 5; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20 * 3;
            }
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 4));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503—J129");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 5, 10));
            ws.GetRow(rowIndex + 1).GetCell(5).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(5).SetCellValue("金属材料化学成分检验报告\nMetal Material Chemical Composition Test Report\n\n第   页 共   页  Page   of   ");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 11, 15));
            ws.GetRow(rowIndex + 1).GetCell(11).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(11).SetCellValue(" 工程名称：\n Project Name:\n\n\n 单位工程名称：\n Unit Name:");

            for (int i = 2; i < 5; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 7));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 8, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 15));
            }
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("委托单位\nEntrusted by");
            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("施工单位\nConstruction Contractor");
            ws.GetRow(rowIndex + 2).GetCell(11).SetCellValue("报告编号\nReport No.");
            ws.GetRow(rowIndex + 3).GetCell(1).SetCellValue("检件名称\nTest Piece Description");
            ws.GetRow(rowIndex + 3).GetCell(6).SetCellValue("检验标准\nTest Criteria");
            ws.GetRow(rowIndex + 3).GetCell(11).SetCellValue("被检验材料标准\nMaterial Specification");
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("检验方法\nTest Method");
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("设备型号\nEquipment Model");
            ws.GetRow(rowIndex + 4).GetCell(11).SetCellValue("检件材质\nTest Piece Material");
            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 5, rowIndex + 17, style, 1, 15, true);
            for (int i = 5; i < 18; i++)
            {

                if (i == 6)
                {
                    ws.GetRow(rowIndex + i).Height = 60 * 20;
                    continue;
                }
                if (i == 5)
                {
                    ws.GetRow(rowIndex + i).Height = 60 * 20;
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 1, 2));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 3, 4));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 5, 5));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 15));
                }
                else
                {
                    ws.GetRow(rowIndex + i).Height = 20 * 20;
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                }

            }
            ws.GetRow(rowIndex + 5).GetCell(1).SetCellValue("质量证明文件编号/炉批号\nQuality Certificate No./Heat No. or Lot No.");
            ws.GetRow(rowIndex + 5).GetCell(3).SetCellValue("检验部位编号\nTest Position No.");
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("规格\nSpecification");
            ws.GetRow(rowIndex + 5).GetCell(6).SetCellValue("元素含量%\nElement Content");

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 18, rowIndex + 19, style, 1, 15, true);
            ws.GetRow(rowIndex + 18).Height = 20 * 20 * 4;
            ws.GetRow(rowIndex + 19).Height = 90 * 20;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 1, 15));
            ws.GetRow(rowIndex + 18).GetCell(1).SetCellValue(" 检验结论Conclusion：\n 共检验点，符合标准要求点，不符合标准要求点，具体检验部位详见示意图。\n Totally points are tested, where points are conforming and points are nonconforming. For specific test positions, see the sketch.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 1, 5));
            ws.GetRow(rowIndex + 19).GetCell(1).SetCellValue("\n 试验人Tested by：\n\n\n 资格Qualification：");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 6, 10));
            ws.GetRow(rowIndex + 19).GetCell(6).SetCellValue("\n 审核人Reviewed by：\n\n\n 资格Qualification：");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 11, 15));
            ws.GetRow(rowIndex + 19).GetCell(11).SetCellValue(" 检测单位：（公章）\n\n Inspection Agency: (Official Seal)\n\n 报告日期Date：    年  月  日");

            ws.GetRow(rowIndex + 18).GetCell(1).CellStyle = ws.GetRow(rowIndex + 19).GetCell(1).CellStyle = ws.GetRow(rowIndex + 19).GetCell(6).CellStyle = ws.GetRow(rowIndex + 19).GetCell(11).CellStyle = style2;
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //19-硬度检查报告SHT 3503-J130
        private void template19(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 5, style, 1, 12, true);
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 10 * 256);
            ws.SetColumnWidth(2, 5 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 10 * 256);
            ws.SetColumnWidth(6, 5 * 256);
            ws.SetColumnWidth(7, 5 * 256);
            ws.SetColumnWidth(8, 5 * 256);
            ws.SetColumnWidth(9, 10 * 256);
            ws.SetColumnWidth(10, 5 * 256);
            ws.SetColumnWidth(11, 5 * 256);
            ws.SetColumnWidth(12, 5 * 256);

            ws.GetRow(rowIndex + 1).Height = 18 * 20 * 7;
            ws.GetRow(rowIndex + 2).Height = ws.GetRow(rowIndex + 3).Height = ws.GetRow(rowIndex + 4).Height = ws.GetRow(rowIndex + 5).Height = 41 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 3));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503—J130");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 4, 9));
            ws.GetRow(rowIndex + 1).GetCell(4).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(4).SetCellValue("硬度检测报告\nHardness Test Report\n\n第   页 共   页  Page  of  ");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 10, 12));
            ws.GetRow(rowIndex + 1).GetCell(10).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(10).SetCellValue("工程名称:\nProject Name:\n\n\n单位工程名称:\nUnit Name:");

            for (int i = 2; i < 6; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 4));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 10, 12));
            }
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("委托单位\nEntrusted by");
            ws.GetRow(rowIndex + 2).GetCell(5).SetCellValue("施工单位\nConstruction Contractor");
            ws.GetRow(rowIndex + 2).GetCell(9).SetCellValue("报告编号\nReport No.");
            ws.GetRow(rowIndex + 3).GetCell(1).SetCellValue("检件名称\nTest Piece Description");
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("检测标准\nTest Criteria");
            ws.GetRow(rowIndex + 3).GetCell(9).SetCellValue("验收标准\nMaterial Specification");
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("检件规格\nTest Piece Specification");
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("检件材质\nTest Piece Material");
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("检测比例\nTest Percentage");
            ws.GetRow(rowIndex + 5).GetCell(1).SetCellValue("检测方法\nTest Position No.");
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("热处理状态\nHT Status");
            ws.GetRow(rowIndex + 5).GetCell(9).SetCellValue("设备型号\nEquipment Model");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 16, style, 1, 12, true);

            for (int i = 6; i < 17; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 12));
                if (i == 6)
                    ws.GetRow(rowIndex + i).Height = 41 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 22 * 20;
            }
            ws.GetRow(rowIndex + 6).GetCell(1).SetCellValue("检测部位编号\nTest Position No.");
            ws.GetRow(rowIndex + 6).GetCell(3).SetCellValue("硬度值\nHardness Value");
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("检测部位编号\nTest Position No.");
            ws.GetRow(rowIndex + 6).GetCell(7).SetCellValue("硬度值\nHardness Value");
            ws.GetRow(rowIndex + 6).GetCell(9).SetCellValue("检测部位编号\nTest Position No.");
            ws.GetRow(rowIndex + 6).GetCell(11).SetCellValue("硬度值\nHardness Value");
            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 17, rowIndex + 18, style, 1, 12, true);
            ws.GetRow(rowIndex + 17).Height = 18 * 20 * 4;
            ws.GetRow(rowIndex + 18).Height = 18 * 20 * 5;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 1, 12));
            ws.GetRow(rowIndex + 17).GetCell(1).SetCellValue("检测结论：\nConclusion:\n共检测点，符合标准要求点，不符合标准要求点，具体检测部位详见示意图。\nTotally points are tested, where points are conforming and points are nonconforming. For specific test positions, see the sketch.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 1, 4));
            ws.GetRow(rowIndex + 18).GetCell(1).SetCellValue("\n 试验人Tested by：\n\n\n 资格Qualification：");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 5, 8));
            ws.GetRow(rowIndex + 18).GetCell(5).SetCellValue("\n 审核人Reviewed by：\n\n\n 资格Qualification：");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 9, 12));
            ws.GetRow(rowIndex + 18).GetCell(9).SetCellValue(" 检测单位：（公章）\n\n Inspection Agency: (Official Seal)\n\n 报告日期Date：    年  月  日");

            ws.GetRow(rowIndex + 17).GetCell(1).CellStyle = ws.GetRow(rowIndex + 18).GetCell(1).CellStyle = ws.GetRow(rowIndex + 18).GetCell(5).CellStyle = ws.GetRow(rowIndex + 18).GetCell(9).CellStyle = style2;

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //21-管道焊接工作记录SHT 3503-J415
        private void template21_old(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 3, style, 0, 12, true);

            //设置列宽
            ws.SetColumnWidth(0, 17 * 256);
            ws.SetColumnWidth(1, 12 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            ws.SetColumnWidth(3, 17 * 256);
            ws.SetColumnWidth(4, 14 * 256);
            ws.SetColumnWidth(5, 12 * 256);
            ws.SetColumnWidth(6, 15 * 256);
            ws.SetColumnWidth(7, 12 * 256);
            ws.SetColumnWidth(8, 13 * 256);
            ws.SetColumnWidth(9, 12 * 256);
            ws.SetColumnWidth(10, 12 * 256);
            ws.SetColumnWidth(11, 17 * 256);
            ws.SetColumnWidth(12, 12 * 256);

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 0, 1));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503-J415-1");

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 2, 9));
            ws.GetRow(rowIndex).GetCell(2).SetCellValue("管道焊接工作记录\r\nPiping Welding Record");

            ws.AddMergedRegion(new CellRangeAddress(0, 0, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(1, 1, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(2, 2, 10, 12));
            ws.AddMergedRegion(new CellRangeAddress(3, 3, 10, 12));

            ws.GetRow(rowIndex).GetCell(10).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区");
            ws.GetRow(rowIndex + 1).GetCell(10).SetCellValue("Project Name:BASF (Guangdong) Integrated Project");
            ws.GetRow(rowIndex + 2).GetCell(10).SetCellValue("单位工程名称：埋地消防系统");
            ws.GetRow(rowIndex + 3).GetCell(10).SetCellValue("Unit Name：FW");




            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 4, rowIndex + 5, style, 0, 12, true);

            ws.GetRow(rowIndex + 4).Height = 30 * 20;
            ws.GetRow(rowIndex + 5).Height = 45 * 20;
            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 0, 0));
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("管道编号/单线号\r\nPiping No./Line No");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 1, 2));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("焊口编号\r\nWeld No.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 3, 3));
            ws.GetRow(rowIndex + 4).GetCell(3).SetCellValue("焊工代号\r\nWelder's Stamp No.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 4, 4));
            ws.GetRow(rowIndex + 4).GetCell(4).SetCellValue("规格mm\r\nSpecification\r\nmm");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 5, 5));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("材质\r\nMaterial");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 6, 6));
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("焊接位置\r\nWelding\r\nPosition");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 7, 8));
            ws.GetRow(rowIndex + 4).GetCell(7).SetCellValue("焊接方法\r\nWelding Process");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 9, 10));
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("焊材牌号\r\nWelding Material Designation");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 11, 11));
            ws.GetRow(rowIndex + 4).GetCell(11).SetCellValue("实际预热温度℃\r\nActual Preheating Temperature ℃");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 12, 12));
            ws.GetRow(rowIndex + 4).GetCell(12).SetCellValue("焊接日期\r\nWelding Date");

            //这里创建行数据
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 23, style, 0, 12, true);
            for (int i = 6; i < 24; i++)
            {
                ws.GetRow(rowIndex + i).Height = 19 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
            }

            #endregion

            #region 尾部
            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 24, rowIndex + 30, style, 0, 12, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 4, 8));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 9, 12));
            ws.GetRow(rowIndex + 24).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 24).GetCell(4).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 24).GetCell(9).SetCellValue("施工单位\r\nConstruction Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 1));
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 25).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 9, 12));
            ws.GetRow(rowIndex + 25).GetCell(9).SetCellValue("记录人 ：\r\nRecord Prepared by:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 9, 12));
            ws.GetRow(rowIndex + 27).GetCell(9).SetCellValue("质量检查员：\r\nQuality Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 9, 12));
            ws.GetRow(rowIndex + 27).GetCell(9).SetCellValue("焊接责任工程师：\r\nWelding Engineer:");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 3));
            ws.GetRow(rowIndex + 30).GetCell(0).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 4, 8));
            ws.GetRow(rowIndex + 30).GetCell(4).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 9, 12));
            ws.GetRow(rowIndex + 30).GetCell(9).SetCellValue("日期Date：            年          月         日");

            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 12), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 12, 12), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 12), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 3, 3), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 8, 8), ws);

            ws.GetRow(rowIndex + 26).Height = ws.GetRow(rowIndex + 28).Height = ws.GetRow(rowIndex + 29).Height = 2 * 20;
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //21-管道焊接工作记录SHT 3503-J415
        private void template21(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 15, true, false, "宋体");
            var styleTwo = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 9.5, true, false, "宋体");
            var styleThree = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 9.5, true, false, "宋体");
            var style4 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10.5, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 3, style, 0, 14, true);

            //设置列宽
            ws.SetColumnWidth(0, 18 * 256);
            ws.SetColumnWidth(1, 9 * 256);
            ws.SetColumnWidth(2, 6 * 256);
            ws.SetColumnWidth(3, 12 * 256);
            ws.SetColumnWidth(4, 18 * 256);
            ws.SetColumnWidth(5, 19 * 256);
            ws.SetColumnWidth(6, 13 * 256);
            ws.SetColumnWidth(7, 13 * 256);
            ws.SetColumnWidth(8, 14 * 256);
            ws.SetColumnWidth(9, 13 * 256);
            ws.SetColumnWidth(10, 13 * 256);
            ws.SetColumnWidth(11, 10 * 256);
            ws.SetColumnWidth(12, 16 * 256);
            ws.SetColumnWidth(13, 14 * 256);
            ws.SetColumnWidth(14, 19 * 256);

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 0, 1));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503-J415-1");
            ws.GetRow(rowIndex).GetCell(0).CellStyle = styleThree;

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 2, 10));
            ws.GetRow(rowIndex).GetCell(2).SetCellValue("管道焊接工作记录\r\nPiping Welding Record");

            ws.AddMergedRegion(new CellRangeAddress(0, 0, 11, 14));
            ws.AddMergedRegion(new CellRangeAddress(1, 1, 11, 14));
            ws.AddMergedRegion(new CellRangeAddress(2, 2, 11, 14));
            ws.AddMergedRegion(new CellRangeAddress(3, 3, 11, 14));

            ws.GetRow(rowIndex).GetCell(11).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区");
            ws.GetRow(rowIndex + 1).GetCell(11).SetCellValue("Project Name:BASF (Guangdong) Integrated Project");
            ws.GetRow(rowIndex + 2).GetCell(11).SetCellValue("单位工程名称：埋地消防系统");
            ws.GetRow(rowIndex + 3).GetCell(11).SetCellValue("Unit Name：FW");
            ws.GetRow(rowIndex).GetCell(11).CellStyle = ws.GetRow(rowIndex + 1).GetCell(11).CellStyle = ws.GetRow(rowIndex + 2).GetCell(11).CellStyle = ws.GetRow(rowIndex + 3).GetCell(11).CellStyle = styleTwo;

            ws.GetRow(rowIndex).Height = ws.GetRow(rowIndex + 1).Height = ws.GetRow(rowIndex + 2).Height = ws.GetRow(rowIndex + 3).Height = 25 * 20;


            //画线
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex, rowIndex, 11, 14), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 1, rowIndex + 1, 11, 14), ws);
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex + 1, rowIndex + 1, 11, 14), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 2, rowIndex + 2, 11, 14), ws);
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex + 2, rowIndex + 2, 11, 14), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 3, rowIndex + 3, 11, 14), ws);


            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 4, rowIndex + 5, style4, 0, 14, true);

            ws.GetRow(rowIndex + 4).Height = 25 * 20;
            ws.GetRow(rowIndex + 5).Height = 25 * 20;
            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 0, 0));
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("管道编号/单线号\r\nPiping No./Line No");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 1, 2));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("焊口编号\r\nWeld No.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 3, 3));
            ws.GetRow(rowIndex + 4).GetCell(3).SetCellValue("焊接形式\r\nWeld Type.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 4, 4));
            ws.GetRow(rowIndex + 4).GetCell(4).SetCellValue("焊工代号\r\nWelder's Stamp No.");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 5, 5));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("规格mm\r\nSpecification mm");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 6, 6));
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("材质\r\nMaterial");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 7, 7));
            ws.GetRow(rowIndex + 4).GetCell(7).SetCellValue("焊接位置\r\nWelding\r\nPosition");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 8, 9));
            ws.GetRow(rowIndex + 4).GetCell(8).SetCellValue("焊接方法\r\nWelding Process");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 10, 11));
            ws.GetRow(rowIndex + 4).GetCell(10).SetCellValue("焊材牌号\r\nWelding Material Designation");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 12, 12));
            ws.GetRow(rowIndex + 4).GetCell(12).SetCellValue("实际预热温度℃\r\nActual Preheating Temperature ℃");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 13, 13));
            ws.GetRow(rowIndex + 4).GetCell(13).SetCellValue("焊接日期\r\nWelding Date");
            ws.AddMergedRegion(new CellRangeAddress(4, 5, 14, 14));
            ws.GetRow(rowIndex + 4).GetCell(14).SetCellValue("无损检查报告\r\nNDE Report.");

            ws.GetRow(rowIndex + 4).GetCell(0).CellStyle = ws.GetRow(rowIndex + 4).GetCell(1).CellStyle
                = ws.GetRow(rowIndex + 4).GetCell(3).CellStyle = ws.GetRow(rowIndex + 4).GetCell(4).CellStyle
                = ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = ws.GetRow(rowIndex + 4).GetCell(6).CellStyle
                = ws.GetRow(rowIndex + 4).GetCell(7).CellStyle = ws.GetRow(rowIndex + 4).GetCell(8).CellStyle
                = ws.GetRow(rowIndex + 4).GetCell(10).CellStyle = ws.GetRow(rowIndex + 4).GetCell(12).CellStyle
                = ws.GetRow(rowIndex + 4).GetCell(13).CellStyle = ws.GetRow(rowIndex + 4).GetCell(14).CellStyle = styleThree;

            //这里创建行数据
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 23, style, 0, 14, true);
            for (int i = 6; i < 24; i++)
            {
                ws.GetRow(rowIndex + i).Height = 19 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 8, 9));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 10, 11));
            }

            #endregion

            #region 尾部
            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false);
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 24, rowIndex + 30, style, 0, 14, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 5, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 10, 14));
            ws.GetRow(rowIndex + 24).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 24).GetCell(0).CellStyle = style1;
            ws.GetRow(rowIndex + 24).GetCell(5).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 24).GetCell(5).CellStyle = style1;
            ws.GetRow(rowIndex + 24).GetCell(10).SetCellValue("施工单位\r\nConstruction Contractor");
            ws.GetRow(rowIndex + 24).GetCell(10).CellStyle = style1;
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 14), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 1));
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 25).Height = 31 * 20;
            ws.GetRow(rowIndex + 27).Height = 31 * 20;
            ws.GetRow(rowIndex + 29).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 5, 6));
            ws.GetRow(rowIndex + 25).GetCell(5).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 10, 14));
            ws.GetRow(rowIndex + 25).GetCell(10).SetCellValue("记录人 ：\r\nRecord Prepared by:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 10, 14));
            ws.GetRow(rowIndex + 27).GetCell(10).SetCellValue("质量检查员：\r\nQuality Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 29, rowIndex + 29, 10, 14));
            ws.GetRow(rowIndex + 29).GetCell(10).SetCellValue("焊接责任工程师：\r\nWelding Engineer:");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 4));
            ws.GetRow(rowIndex + 30).GetCell(0).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 5, 9));
            ws.GetRow(rowIndex + 30).GetCell(5).SetCellValue("日期Date：                   年        月        日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 30, rowIndex + 30, 10, 14));
            ws.GetRow(rowIndex + 30).GetCell(10).SetCellValue("日期Date：            年          月         日");

            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 14), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 14, 14), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 30, rowIndex + 30, 0, 14), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 4, 4), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 24, rowIndex + 30, 9, 9), ws);

            ws.GetRow(rowIndex + 26).Height = ws.GetRow(rowIndex + 28).Height = 5 * 20;
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }
        //22-射线检测比例确认表SHT 3503-J412-2007
        private void template22_old(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 4, style, 0, 20, true);

            //设置列宽
            ws.SetColumnWidth(0, 11 * 256);
            ws.SetColumnWidth(1, 5 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 6 * 256);
            ws.SetColumnWidth(6, 6 * 256);
            ws.SetColumnWidth(7, 6 * 256);
            ws.SetColumnWidth(8, 6 * 256);
            ws.SetColumnWidth(9, 6 * 256);
            ws.SetColumnWidth(10, 6 * 256);
            ws.SetColumnWidth(11, 6 * 256);
            ws.SetColumnWidth(12, 21 * 256);

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 0, 2));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503-J412-1-2007");

            ws.AddMergedRegion(new CellRangeAddress(0, 0, 3, 17));
            ws.GetRow(rowIndex).GetCell(3).SetCellValue("管道焊接接头射线检测比例确认表（一）");
            ws.GetRow(rowIndex).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true);
            ws.AddMergedRegion(new CellRangeAddress(1, 2, 3, 17));
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("Pipeline Welding Joints Radiographic Examination Rate Confirmation Form（I）");
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true);

            ws.AddMergedRegion(new CellRangeAddress(0, 3, 18, 20));
            ws.AddMergedRegion(new CellRangeAddress(3, 3, 3, 17));

            ws.GetRow(rowIndex).GetCell(18).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区\nProject Name：BASF (Guangdong) Integrated Project\n单元名称：Citral\nUnit Name:Citral");
            ws.GetRow(rowIndex).GetCell(18).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);

            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("共  1  页   第  1  页");

            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("执行标准\r\nApplicable code");

            ws.AddMergedRegion(new CellRangeAddress(4, 4, 1, 5));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 8, 15));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 16, 17));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 18, 20));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("NB/T47013.2-2015");
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("检测方法\r\nExam. Method");
            ws.GetRow(rowIndex + 4).GetCell(8).SetCellValue("射线检测\r\nRT");
            ws.GetRow(rowIndex + 4).GetCell(16).SetCellValue("检测比例\r\nExam. Rate");
            ws.GetRow(rowIndex + 4).GetCell(18).SetCellValue("5%");

            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 5, rowIndex + 6, style, 0, 20, true);

            ws.GetRow(rowIndex + 5).Height = 28 * 20;
            ws.GetRow(rowIndex + 6).Height = 42 * 20;

            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 0, 1));
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("管道编号\r\nPipeline No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 2, 2));
            ws.GetRow(rowIndex + 5).GetCell(2).SetCellValue("材质\r\nMaterial");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 3, 4));
            ws.GetRow(rowIndex + 5).GetCell(3).SetCellValue("规  格/Size");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 3, 4));
            ws.GetRow(rowIndex + 6).GetCell(3).SetCellValue("mm");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 8));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("管道焊接接头\r\nWelding Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 9, 12));
            ws.GetRow(rowIndex + 5).GetCell(9).SetCellValue("施焊焊工\r\nWelder");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 13, 16));
            ws.GetRow(rowIndex + 5).GetCell(13).SetCellValue("检测焊接接头\r\nExanined Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 17, 19));
            ws.GetRow(rowIndex + 5).GetCell(17).SetCellValue("实际检测比例");

            ws.GetRow(rowIndex + 5).GetCell(20).SetCellValue("检测报告编号");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 6));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("总数\r\nTotal");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 7, 8));
            ws.GetRow(rowIndex + 6).GetCell(7).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 9, 10));
            ws.GetRow(rowIndex + 6).GetCell(9).SetCellValue("焊工代号\r\nWelder No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 11, 12));
            ws.GetRow(rowIndex + 6).GetCell(11).SetCellValue("施焊数量\r\nWelded Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 13, 14));
            ws.GetRow(rowIndex + 6).GetCell(13).SetCellValue("总数\r\nTotal Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 15, 16));
            ws.GetRow(rowIndex + 6).GetCell(15).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 17, 19));
            ws.GetRow(rowIndex + 6).GetCell(17).SetCellValue("Actual exam. Rate");

            ws.GetRow(rowIndex + 6).GetCell(20).SetCellValue("Examination Report No.");

            //这里创建行数据
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 7, rowIndex + 16, style, 0, 20, true);
            for (int i = 7; i < 15; i++)
            {
                ws.GetRow(rowIndex + i).Height = 25 * 20;
            }
            //这里循环数据
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("小计\r\nTotal");

            #endregion

            #region 尾部

            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("备注\r\nRemark");
            ws.GetRow(rowIndex + 16).GetCell(1).SetCellValue("焊口位置与检测焊口见管道单线图与无损检测报告。\r\nPlease refer to Pipeline Iso-drawing and NDE Report for joints position and examined joints.");
            ws.GetRow(rowIndex + 16).GetCell(1).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 1, 20));


            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false);

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 17, rowIndex + 24, style, 0, 20, true);

            ws.GetRow(rowIndex + 17).GetCell(20).CellStyle = style1;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 0, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 4, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 10, 16));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 17, 20));

            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 17).GetCell(4).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 17).GetCell(10).SetCellValue("检 测 单 位\r\nExamination Contractor");
            ws.GetRow(rowIndex + 17).GetCell(17).SetCellValue("施 工 单 位\r\nConstruction Company");
            ws.GetRow(rowIndex + 17).GetCell(0).CellStyle = ws.GetRow(rowIndex + 17).GetCell(4).CellStyle = ws.GetRow(rowIndex + 17).GetCell(10).CellStyle = ws.GetRow(rowIndex + 17).GetCell(17).CellStyle = style1;
            ws.GetRow(rowIndex + 17).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 3));
            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 18).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 4, 9));
            ws.GetRow(rowIndex + 18).GetCell(4).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 10, 16));
            ws.GetRow(rowIndex + 18).GetCell(10).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 17, 20));
            ws.GetRow(rowIndex + 18).GetCell(17).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 17, 20));
            ws.GetRow(rowIndex + 20).GetCell(17).SetCellValue("质量检查员：\r\nQuality Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 17, 20));
            ws.GetRow(rowIndex + 20).GetCell(17).SetCellValue("制表：\r\nPrepared:");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 3));
            ws.GetRow(rowIndex + 24).GetCell(0).SetCellValue("日期Date：   年     月     日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 4, 9));
            ws.GetRow(rowIndex + 24).GetCell(4).SetCellValue("日期Date：       年      月      日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 10, 16));
            ws.GetRow(rowIndex + 24).GetCell(10).SetCellValue("日期Date：                                         年      月      日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 24, 17, 20));
            ws.GetRow(rowIndex + 24).GetCell(17).SetCellValue("日期Date：        年      月      日");
            ws.GetRow(rowIndex + 19).Height = ws.GetRow(rowIndex + 21).Height = ws.GetRow(rowIndex + 22).Height = ws.GetRow(rowIndex + 23).Height = 2 * 20;


            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 20), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 18, rowIndex + 24, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 24, 20, 20), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 24, rowIndex + 24, 0, 20), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 24, 3, 3), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 24, 9, 9), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 24, 16, 16), ws);

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //22-射线检测比例确认表SHT 3503-J412-2007
        private void template22(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10.5, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 4, style, 0, 20, true);

            //设置列宽
            ws.SetColumnWidth(0, 13 * 256);
            ws.SetColumnWidth(1, 6 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 7 * 256);
            ws.SetColumnWidth(6, 7 * 256);
            ws.SetColumnWidth(7, 7 * 256);
            ws.SetColumnWidth(8, 7 * 256);
            ws.SetColumnWidth(9, 7 * 256);
            ws.SetColumnWidth(10, 7 * 256);
            ws.SetColumnWidth(11, 7 * 256);
            ws.SetColumnWidth(12, 7 * 256);
            ws.SetColumnWidth(13, 7 * 256);
            ws.SetColumnWidth(14, 7 * 256);
            ws.SetColumnWidth(15, 7 * 256);
            ws.SetColumnWidth(16, 7 * 256);
            ws.SetColumnWidth(17, 5 * 256);
            ws.SetColumnWidth(18, 7 * 256);
            ws.SetColumnWidth(19, 7 * 256);
            ws.SetColumnWidth(20, 25 * 256);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex + 3, 0, 2));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503-J412-1-2007");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 3, 17));
            ws.GetRow(rowIndex).GetCell(3).SetCellValue("管道焊接接头射线检测比例确认表（一）");
            ws.GetRow(rowIndex).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 2, 3, 17));
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("Pipeline Welding Joints Radiographic Examination Rate Confirmation Form（I）");
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 18, 20));
            ws.GetRow(rowIndex).GetCell(18).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex+1, rowIndex+1, 18, 20));
            ws.GetRow(rowIndex+1).GetCell(18).SetCellValue("Project Name：BASF (Guangdong) Integrated Project");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 18, 20));
            ws.GetRow(rowIndex + 2).GetCell(18).SetCellValue("单元名称：Citral");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 18, 20));
            ws.GetRow(rowIndex + 3).GetCell(18).SetCellValue("Unit Name:Citral");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 3, 17));

            ws.GetRow(rowIndex).GetCell(18).CellStyle = ws.GetRow(rowIndex + 1).GetCell(18).CellStyle = ws.GetRow(rowIndex + 2).GetCell(18).CellStyle = ws.GetRow(rowIndex + 3).GetCell(18).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 10.5, true, false);
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex , rowIndex, 18, 20), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 1, rowIndex + 1, 18, 20), ws);
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex + 1, rowIndex + 1, 18, 20), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 2, rowIndex + 2, 18, 20), ws);
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex + 2, rowIndex + 2, 18, 20), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 3, rowIndex + 3, 18, 20), ws);


            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("共  1  页   第  1  页");

            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("执行标准\r\nApplicable code");

            ws.AddMergedRegion(new CellRangeAddress(4, 4, 1, 5));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 8, 15));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 16, 17));
            ws.AddMergedRegion(new CellRangeAddress(4, 4, 18, 20));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("NB/T47013.2-2015");
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("检测方法\r\nExam. Method");
            ws.GetRow(rowIndex + 4).GetCell(8).SetCellValue("射线检测\r\nRT");
            ws.GetRow(rowIndex + 4).GetCell(16).SetCellValue("检测比例\r\nExam. Rate");
            ws.GetRow(rowIndex + 4).GetCell(18).SetCellValue("5%");

            ws.GetRow(rowIndex).Height = 27 * 20;
            ws.GetRow(rowIndex + 1).Height = 27 * 20;
            ws.GetRow(rowIndex + 2).Height = 15 * 20;
            ws.GetRow(rowIndex + 3).Height = 20 * 20;
            ws.GetRow(rowIndex + 4).Height = 40 * 20;

            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 5, rowIndex + 6, style, 0, 20, true);

            ws.GetRow(rowIndex + 5).Height = 29 * 20;
            ws.GetRow(rowIndex + 6).Height = 43 * 20;

            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 0, 1));
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("管道编号\r\nPipeline No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 2, 2));
            ws.GetRow(rowIndex + 5).GetCell(2).SetCellValue("材质\r\nMaterial");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 3, 4));
            ws.GetRow(rowIndex + 5).GetCell(3).SetCellValue("规 格/Size");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 3, 4));
            ws.GetRow(rowIndex + 6).GetCell(3).SetCellValue("mm");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 8));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("管道焊接接头\r\nWelding Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 9, 12));
            ws.GetRow(rowIndex + 5).GetCell(9).SetCellValue("施焊焊工\r\nWelder");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 13, 16));
            ws.GetRow(rowIndex + 5).GetCell(13).SetCellValue("检测焊接接头\r\nExanined Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 17, 19));
            ws.GetRow(rowIndex + 5).GetCell(17).SetCellValue("实际检测比例");

            ws.GetRow(rowIndex + 5).GetCell(20).SetCellValue("检测报告编号");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 6));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("总数\r\nTotal");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 7, 8));
            ws.GetRow(rowIndex + 6).GetCell(7).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 9, 10));
            ws.GetRow(rowIndex + 6).GetCell(9).SetCellValue("焊工代号\r\nWelder No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 11, 12));
            ws.GetRow(rowIndex + 6).GetCell(11).SetCellValue("施焊数量\r\nWelded Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 13, 14));
            ws.GetRow(rowIndex + 6).GetCell(13).SetCellValue("总数\r\nTotal Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 15, 16));
            ws.GetRow(rowIndex + 6).GetCell(15).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 17, 19));
            ws.GetRow(rowIndex + 6).GetCell(17).SetCellValue("Actual exam. Rate");

            ws.GetRow(rowIndex + 6).GetCell(20).SetCellValue("Examination Report No.");
            RegionUtil.SetBorderBottom(0, new CellRangeAddress(rowIndex+5, rowIndex+5, 17, 20), ws);
            RegionUtil.SetBorderTop(0, new CellRangeAddress(rowIndex + 6, rowIndex + 6, 17, 20), ws);

            //这里创建行数据 17-16
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 7, rowIndex + 16, style, 0, 20, true);
            for (int i = 7; i < 16; i++)
            {
                ws.GetRow(rowIndex + i).Height = 28 * 20;
                if (i == 7)
                {
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + 10, 0, 1));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + 10, 2, 2));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + 10, 3, 4));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + 10, 5, 6));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + 10, 7, 8));
                }
                if (i > 10)
                {
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                }
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 14));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 15, 16));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 17, 19));

            }
            //这里循环数据
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("小计\r\nTotal");

            //模拟数据
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("1701-130-9062.058-0000");
            ws.GetRow(rowIndex + 7).GetCell(2).SetCellValue("A53-B");
            ws.GetRow(rowIndex + 7).GetCell(3).SetCellValue("114");
            ws.GetRow(rowIndex + 7).GetCell(5).SetCellValue("18");
            ws.GetRow(rowIndex + 7).GetCell(7).SetCellValue("1");
            ws.GetRow(rowIndex + 7).GetCell(9).SetCellValue("W7004");
            ws.GetRow(rowIndex + 8).GetCell(9).SetCellValue("W7010");
            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("W7011");
            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("W7013");

            ws.GetRow(rowIndex + 7).GetCell(11).SetCellValue("6");
            ws.GetRow(rowIndex + 8).GetCell(11).SetCellValue("3");
            ws.GetRow(rowIndex + 9).GetCell(11).SetCellValue("6");
            ws.GetRow(rowIndex + 10).GetCell(11).SetCellValue("1");

            ws.GetRow(rowIndex + 7).GetCell(13).SetCellValue("1");
            ws.GetRow(rowIndex + 8).GetCell(13).SetCellValue("3");
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("6");
            ws.GetRow(rowIndex + 10).GetCell(13).SetCellValue("1");

            ws.GetRow(rowIndex + 7).GetCell(15).SetCellValue("0");
            ws.GetRow(rowIndex + 8).GetCell(15).SetCellValue("0");
            ws.GetRow(rowIndex + 9).GetCell(15).SetCellValue("0");
            ws.GetRow(rowIndex + 10).GetCell(15).SetCellValue("1");

            ws.GetRow(rowIndex + 7).GetCell(17).SetCellValue("16.87%");
            ws.GetRow(rowIndex + 8).GetCell(17).SetCellValue("100.00%");
            ws.GetRow(rowIndex + 9).GetCell(17).SetCellValue("100.00%");
            ws.GetRow(rowIndex + 10).GetCell(17).SetCellValue("50.00%");

            ws.GetRow(rowIndex + 7).GetCell(20).SetCellValue("RT-0010");
            ws.GetRow(rowIndex + 8).GetCell(20).SetCellValue("RT-009\r\nRT-0010");
            ws.GetRow(rowIndex + 9).GetCell(20).SetCellValue("RT-0010");
            ws.GetRow(rowIndex + 10).GetCell(20).SetCellValue("RT-037");

            #endregion

            #region 尾部

            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("备注\r\nRemark");
            ws.GetRow(rowIndex + 16).GetCell(1).SetCellValue("焊口位置与检测焊口见管道单线图与无损检测报告。\r\nPlease refer to Pipeline Iso-drawing and NDE Report for joints position and examined joints.");
            ws.GetRow(rowIndex + 16).GetCell(1).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 10.5, true, false);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 1, 20));
            ws.GetRow(rowIndex + 16).Height = 29 * 20;


            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 10.5, true, false);
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10.5, true, false);
            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Bottom, NPOI.SS.UserModel.HorizontalAlignment.Left, 10.5, true, false);

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 17, rowIndex + 23, style, 0, 20, true);

            ws.GetRow(rowIndex + 17).GetCell(20).CellStyle = style1;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 0, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 4, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 10, 16));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 17, 20));

            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 17).GetCell(4).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 17).GetCell(10).SetCellValue("检 测 单 位\r\nExamination Contractor");
            ws.GetRow(rowIndex + 17).GetCell(17).SetCellValue("施 工 单 位\r\nConstruction Company");
            ws.GetRow(rowIndex + 17).GetCell(0).CellStyle = ws.GetRow(rowIndex + 17).GetCell(4).CellStyle = ws.GetRow(rowIndex + 17).GetCell(10).CellStyle = ws.GetRow(rowIndex + 17).GetCell(17).CellStyle = style1;
            ws.GetRow(rowIndex + 17).Height = 33 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 3));
            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 18).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 4, 9));
            ws.GetRow(rowIndex + 18).GetCell(4).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 10, 16));
            ws.GetRow(rowIndex + 18).GetCell(10).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 17, 20));
            ws.GetRow(rowIndex + 18).GetCell(17).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 17, 20));
            ws.GetRow(rowIndex + 20).GetCell(17).SetCellValue("质量检查员：\r\nQuality Inspector:");
            ws.GetRow(rowIndex + 20).Height = 31 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 22, rowIndex + 22, 17, 20));
            ws.GetRow(rowIndex + 22).GetCell(17).SetCellValue("制表：\r\nPrepared:");
            ws.GetRow(rowIndex + 22).Height = 31 * 20;


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 0, 3));
            ws.GetRow(rowIndex + 23).GetCell(0).SetCellValue("日期Date：   年     月     日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 4, 9));
            ws.GetRow(rowIndex + 23).GetCell(4).SetCellValue("日期Date：       年      月      日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 10, 16));
            ws.GetRow(rowIndex + 23).GetCell(10).SetCellValue("日期Date：           年      月      日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 17, 20));
            ws.GetRow(rowIndex + 23).GetCell(17).SetCellValue("日期Date：        年      月      日");
            ws.GetRow(rowIndex + 23).Height = 29 * 20;

            ws.GetRow(rowIndex + 23).GetCell(0).CellStyle = ws.GetRow(rowIndex + 23).GetCell(4).CellStyle = ws.GetRow(rowIndex + 23).GetCell(10).CellStyle = ws.GetRow(rowIndex + 23).GetCell(17).CellStyle = style2;

            ws.GetRow(rowIndex + 19).Height = ws.GetRow(rowIndex + 21).Height = 14 * 20;


            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 20), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 20, 20), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 0, 20), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 3, 3), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 9, 9), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 23, 16, 16), ws);

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //23-TP-09-超声&PAUT&TOFD检测比例确认表
        private void template23(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            #region 头部
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "宋体");
            int rowIndex = 0;
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 5, style, 0, 20, true);

            for (int i = 0; i < 21; i++)
            {
                ws.GetRow(rowIndex).GetCell(i).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10);
            }
            //设置列宽
            ws.SetColumnWidth(0, 11 * 256);
            ws.SetColumnWidth(1, 6 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            ws.SetColumnWidth(3, 6 * 256);
            ws.SetColumnWidth(4, 6 * 256);
            ws.SetColumnWidth(5, 7 * 256);
            ws.SetColumnWidth(6, 7 * 256);
            ws.SetColumnWidth(7, 7 * 256);
            ws.SetColumnWidth(8, 7 * 256);
            ws.SetColumnWidth(9, 7 * 256);
            ws.SetColumnWidth(10, 7 * 256);
            ws.SetColumnWidth(11, 7 * 256);
            ws.SetColumnWidth(12, 7 * 256);
            ws.SetColumnWidth(13, 7 * 256);
            ws.SetColumnWidth(14, 7 * 256);
            ws.SetColumnWidth(15, 7 * 256);
            ws.SetColumnWidth(16, 7 * 256);
            ws.SetColumnWidth(17, 7 * 256);
            ws.SetColumnWidth(18, 7 * 256);
            ws.SetColumnWidth(19, 7 * 256);
            ws.SetColumnWidth(20, 24 * 256);



            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 4, 0, 2));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503-J412-1-2007");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 3, 17));
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("管道焊接接头超声/PAUT/TOFD检测比例确认表（一）");
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 3, 3, 17));
            ws.GetRow(rowIndex + 2).GetCell(3).SetCellValue("Pipeline Welding Joints Ultrasonic Examination/PAUT/TOFD Rate Confirmation Form（I）");
            ws.GetRow(rowIndex + 2).GetCell(3).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 4, 18, 20));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 3, 17));


            ws.GetRow(rowIndex + 1).GetCell(18).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false);
            ws.GetRow(rowIndex + 1).GetCell(18).SetCellValue("工程名称：巴斯夫（广东）一体化项目专用化学品二区\nProject Name：BASF (Guangdong) Integrated Project\n单元名称：Citral\nUnit Name:Citral");

            ws.GetRow(rowIndex + 4).GetCell(3).SetCellValue("共  1  页   第  1  页");



            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 1, 5));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 6, 7));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 8, 15));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 16, 17));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 18, 20));
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("执行标准\r\nApplicable code");
            ws.GetRow(rowIndex + 5).GetCell(1).SetCellValue("NB/T47013.3-2015");
            ws.GetRow(rowIndex + 5).GetCell(6).SetCellValue("检测方法\r\nExam. Method");
            ws.GetRow(rowIndex + 5).GetCell(8).SetCellValue("超声检测\r\nUT");
            ws.GetRow(rowIndex + 5).GetCell(16).SetCellValue("检测比例\r\nExam. Rate");
            ws.GetRow(rowIndex + 5).GetCell(18).SetCellValue("95%");


            //表头部分设置行高
            ws.GetRow(rowIndex).Height = 13 * 20;
            ws.GetRow(rowIndex + 1).Height = 27 * 20;
            ws.GetRow(rowIndex + 2).Height = 27 * 20;
            ws.GetRow(rowIndex + 4).Height = 19 * 20;
            ws.GetRow(rowIndex + 5).Height = 39 * 20;
            #endregion

            #region 表格部分
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 7, style, 0, 20, true);

            ws.GetRow(rowIndex + 6).Height = 28 * 20;
            ws.GetRow(rowIndex + 7).Height = 42 * 20;


            //设置表头部分
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 7, 0, 1));
            ws.GetRow(rowIndex + 6).GetCell(0).SetCellValue("管道编号\r\nPipeline No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 7, 2, 2));
            ws.GetRow(rowIndex + 6).GetCell(2).SetCellValue("材质\r\nMaterial");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 3, 4));
            ws.GetRow(rowIndex + 6).GetCell(3).SetCellValue("规  格/Size");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 3, 4));
            ws.GetRow(rowIndex + 7).GetCell(3).SetCellValue("mm");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 8));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("管道焊接接头\r\nWelding Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 9, 12));
            ws.GetRow(rowIndex + 6).GetCell(9).SetCellValue("施焊焊工\r\nWelder");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 13, 16));
            ws.GetRow(rowIndex + 6).GetCell(13).SetCellValue("检测焊接接头\r\nExanined Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 17, 19));
            ws.GetRow(rowIndex + 6).GetCell(17).SetCellValue("实际检测比例");

            ws.GetRow(rowIndex + 6).GetCell(20).SetCellValue("检测报告编号");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 5, 6));
            ws.GetRow(rowIndex + 7).GetCell(5).SetCellValue("总数\r\nTotal");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 7, 8));
            ws.GetRow(rowIndex + 7).GetCell(7).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 9, 10));
            ws.GetRow(rowIndex + 7).GetCell(9).SetCellValue("焊工代号\r\nWelder No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 11, 12));
            ws.GetRow(rowIndex + 7).GetCell(11).SetCellValue("施焊数量\r\nWelded Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 13, 14));
            ws.GetRow(rowIndex + 7).GetCell(13).SetCellValue("总数\r\nTotal Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 15, 16));
            ws.GetRow(rowIndex + 7).GetCell(15).SetCellValue("固定口数\r\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 17, 19));
            ws.GetRow(rowIndex + 7).GetCell(17).SetCellValue("Actual exam. Rate");

            ws.GetRow(rowIndex + 7).GetCell(20).SetCellValue("Examination Report No.");

            //这里创建行数据
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 8, rowIndex + 18, style, 0, 20, true);
            for (int i = 8; i < 16; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
            }
            //这里循环数据
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("小计\r\nTotal");
            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("备注\r\nRemark");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 1, 20));
            ws.GetRow(rowIndex + 17).GetCell(1).SetCellValue("焊口位置与检测焊口见管道单线图与无损检测报告。\r\nPlease refer to Pipeline Iso-drawing and NDE Report for joints position and examined joints.");
            ws.GetRow(rowIndex + 17).GetCell(1).CellStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false);

            #endregion

            #region 尾部


            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, true, false);
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 18, rowIndex + 25, style, 0, 20, true);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 4, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 10, 16));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 18, rowIndex + 18, 17, 20));

            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue("建设/监理单位\r\nOwner/Supervision Contractor");
            ws.GetRow(rowIndex + 18).GetCell(4).SetCellValue("总承包单位\r\nGeneral Contractor");
            ws.GetRow(rowIndex + 18).GetCell(10).SetCellValue("检 测 单 位\r\nExamination Contractor");
            ws.GetRow(rowIndex + 18).GetCell(17).SetCellValue("施 工 单 位\r\nConstruction Company");
            ws.GetRow(rowIndex + 18).Height = 32 * 20;
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false);
            ws.GetRow(rowIndex + 18).GetCell(0).CellStyle = ws.GetRow(rowIndex + 18).GetCell(4).CellStyle = ws.GetRow(rowIndex + 18).GetCell(10).CellStyle = ws.GetRow(rowIndex + 18).GetCell(17).CellStyle = style1;


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 0, 3));
            ws.GetRow(rowIndex + 19).GetCell(0).SetCellValue("专业工程师\r\nDiscipline Engineer:");
            ws.GetRow(rowIndex + 19).Height = 32 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 4, 9));
            ws.GetRow(rowIndex + 19).GetCell(4).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 10, 16));
            ws.GetRow(rowIndex + 19).GetCell(10).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 17, 20));
            ws.GetRow(rowIndex + 19).GetCell(17).SetCellValue("专业工程师\r\nDiscipline Engineer:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 21, 17, 20));
            ws.GetRow(rowIndex + 21).GetCell(17).SetCellValue("质量检查员：\r\nQuality Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 23, rowIndex + 23, 17, 20));
            ws.GetRow(rowIndex + 23).GetCell(17).SetCellValue("制表：\r\nPrepared:");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 3));
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("日期Date：   年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 4, 9));
            ws.GetRow(rowIndex + 25).GetCell(4).SetCellValue("日期Date：   年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 10, 16));
            ws.GetRow(rowIndex + 25).GetCell(10).SetCellValue("日期Date：   年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 17, 20));
            ws.GetRow(rowIndex + 25).GetCell(17).SetCellValue("日期Date：   年   月   日");


            RegionUtil.SetBorderTop(1, new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 20), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 18, rowIndex + 18, 0, 20), ws);
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex + 18, rowIndex + 25, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 25, 20, 20), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 20), ws);

            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 25, 3, 3), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 25, 9, 9), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 18, rowIndex + 25, 16, 16), ws);

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //水平垂直居中
            ws.HorizontallyCenter = true;
            ws.VerticallyCenter = true;

            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //24-TP-10-渗透&MT检测比例确认表
        private void template24(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            #region 头部
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Right, 10, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex, style1, 0, 20, true);

            //设置行宽度
            ws.SetColumnWidth(0, 13 * 256);
            ws.SetColumnWidth(1, 3 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            for (int i = 3; i < 20; i++)
            {
                ws.SetColumnWidth(1, 3 * 256);
            }
            ws.SetColumnWidth(20, 23 * 256);

            //设置行高度
            ws.GetRow(rowIndex).Height = 10 * 20;
            ws.GetRow(rowIndex).GetCell(20).CellStyle = style1;
            ws.GetRow(rowIndex).GetCell(20).SetCellValue("Form No. TP-10");

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 2, style, 0, 20, true);
            //设置行高度
            ws.GetRow(rowIndex + 1).Height = 10 * 20 * 9;
            ws.GetRow(rowIndex + 2).Height = 10 * 20 * 3;

            //合并单元格和填充文本
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 0, 2));
            ws.GetRow(rowIndex + 1).GetCell(0).SetCellValue("");

            var style3 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 3, 17));
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = style3;
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("管道焊接接头渗透/磁粉检测比例确认表（一）\nPipeline Welding Joints Penetrant/Magnetic Examination Rate Confirmation Form（I）\n共  1  页   第  1  页");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false, "Arial Unicode MS");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 18, 20));
            ws.GetRow(rowIndex + 1).GetCell(18).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(18).SetCellValue("\n 工程名称：巴斯夫（广东）一体化项目\n Project Name：BASF (Guangdong) Integrated Project\n 单元名称：Citral\n Unit Name:Citral");

            ws.GetRow(rowIndex + 2).GetCell(0).SetCellValue("执行标准\nApplicable code");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 1, 5));
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("NB/T47013.3-2015");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 6, 7));
            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("检测方法\nExam. Method");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 8, 15));
            ws.GetRow(rowIndex + 2).GetCell(8).SetCellValue("渗透检测\nPT");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 16, 17));
            ws.GetRow(rowIndex + 2).GetCell(16).SetCellValue("检测比例\nExam. Rate");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 18, 20));
            ws.GetRow(rowIndex + 2).GetCell(18).SetCellValue("95%");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 3, rowIndex + 13, style, 0, 20, true);
            //设置高度和合并列填充文本
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 0, 1));
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("管道编号\nPipeline No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 2, 2));
            ws.GetRow(rowIndex + 3).GetCell(2).SetCellValue("材质\nMaterial");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 3, 4));
            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("规  格/Size\n mm");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 8));
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("管道焊接接头\nWelding Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 9, 12));
            ws.GetRow(rowIndex + 3).GetCell(9).SetCellValue("施焊焊工\nWelder");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 13, 16));
            ws.GetRow(rowIndex + 3).GetCell(13).SetCellValue("检测焊接接头\nExanined Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 6));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("总数\nTotal");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 7, 8));
            ws.GetRow(rowIndex + 4).GetCell(7).SetCellValue("固定口数\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 9, 10));
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("焊工代号\nWelder No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 11, 12));
            ws.GetRow(rowIndex + 4).GetCell(11).SetCellValue("施焊数量\nWelded Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 13, 14));
            ws.GetRow(rowIndex + 4).GetCell(13).SetCellValue("总数\nTotal Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 15, 16));
            ws.GetRow(rowIndex + 4).GetCell(15).SetCellValue("固定口数\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 17, 19));
            ws.GetRow(rowIndex + 3).GetCell(17).SetCellValue("实际检测比例\nActual exam. Rate");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 20, 20));
            ws.GetRow(rowIndex + 3).GetCell(20).SetCellValue("检测报告编号\nExamination Report No.");


            for (int i = 3; i < 14; i++)
            {
                if (i == 3 || i == 4)
                {
                    ws.GetRow(rowIndex + i).Height = 30 * 20;
                    continue;
                }

                if (i == 13)
                    ws.GetRow(rowIndex + i).Height = 30 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 19 * 20;

                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 14));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 15, 16));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 17, 19));
            }
            ws.GetRow(rowIndex + 13).GetCell(0).SetCellValue("小计\nTotal");
            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 14, rowIndex + 16, style, 0, 20, true);
            //设置行高
            ws.GetRow(rowIndex + 14).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 15).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 16).Height = 20 * 20 * 7;

            ws.GetRow(rowIndex + 14).GetCell(0).SetCellValue("备注\nRemark");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 1, 20));

            ws.GetRow(rowIndex + 14).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 14).GetCell(1).SetCellValue("焊口位置与检测焊口见管道单线图与无损检测报告。\nPlease refer to Pipeline Iso-drawing and NDE Report for joints position and examined joints.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 0, 3));
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("建 设 / 监 理 单 位\nOwner/JianLi Company");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 4, 9));
            ws.GetRow(rowIndex + 15).GetCell(4).SetCellValue("总 承 包 单 位\nGeneral Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 10, 16));
            ws.GetRow(rowIndex + 15).GetCell(10).SetCellValue("检 测 单 位\nExamination Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 17, 20));
            ws.GetRow(rowIndex + 15).GetCell(17).SetCellValue("施 工 单 位\nConstruction Company");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 0, 3));
            ws.GetRow(rowIndex + 16).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 4, 9));
            ws.GetRow(rowIndex + 16).GetCell(4).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(4).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 10, 16));
            ws.GetRow(rowIndex + 16).GetCell(10).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(10).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 17, 20));
            ws.GetRow(rowIndex + 16).GetCell(17).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(17).SetCellValue("专业工程师\n Discipline Engineer: \n\n 质量检查员：\n Quality Inspector:\n\n 制表：\n Prepared：\n\n 日期Date：    年   月   日");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //水平垂直居中
            ws.HorizontallyCenter = true;
            ws.VerticallyCenter = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //24-TP-10-渗透&MT检测比例确认表
        private void template25_1(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            #region 头部
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Right, 10, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex, style1, 0, 20, true);

            //设置行宽度
            ws.SetColumnWidth(0, 13 * 256);
            ws.SetColumnWidth(1, 3 * 256);
            ws.SetColumnWidth(2, 10 * 256);
            for (int i = 3; i < 20; i++)
            {
                ws.SetColumnWidth(1, 3 * 256);
            }
            ws.SetColumnWidth(20, 23 * 256);

            //设置行高度
            ws.GetRow(rowIndex).Height = 10 * 20;
            ws.GetRow(rowIndex).GetCell(20).CellStyle = style1;
            ws.GetRow(rowIndex).GetCell(20).SetCellValue("Form No. TP-10");

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 2, style, 0, 20, true);
            //设置行高度
            ws.GetRow(rowIndex + 1).Height = 10 * 20 * 9;
            ws.GetRow(rowIndex + 2).Height = 10 * 20 * 3;

            //合并单元格和填充文本
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 0, 2));
            ws.GetRow(rowIndex + 1).GetCell(0).SetCellValue("");

            var style3 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 3, 17));
            ws.GetRow(rowIndex + 1).GetCell(3).CellStyle = style3;
            ws.GetRow(rowIndex + 1).GetCell(3).SetCellValue("管道焊接接头PMI检测比例确认表（一）\nPipeline Welding Joints PMI Examination Rate Confirmation Form（I）\n共  1  页   第  1  页");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false, "Arial Unicode MS");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 18, 20));
            ws.GetRow(rowIndex + 1).GetCell(18).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(18).SetCellValue("\n 工程名称：巴斯夫（广东）一体化项目\n Project Name：BASF (Guangdong) Integrated Project\n 单元名称：Citral\n Unit Name:Citral");

            ws.GetRow(rowIndex + 2).GetCell(0).SetCellValue("执行标准\nApplicable code");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 1, 5));
            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 6, 7));
            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("检测方法\nExam. Method");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 8, 15));
            ws.GetRow(rowIndex + 2).GetCell(8).SetCellValue("PMI检测");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 16, 17));
            ws.GetRow(rowIndex + 2).GetCell(16).SetCellValue("检测比例\nExam. Rate");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 18, 20));
            ws.GetRow(rowIndex + 2).GetCell(18).SetCellValue("2%");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 3, rowIndex + 13, style, 0, 20, true);
            //设置高度和合并列填充文本
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 0, 1));
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("管道编号\nPipeline No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 2, 2));
            ws.GetRow(rowIndex + 3).GetCell(2).SetCellValue("材质\nMaterial");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 3, 4));
            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("规  格/Size\n mm");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 8));
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("管道焊接接头\nWelding Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 9, 12));
            ws.GetRow(rowIndex + 3).GetCell(9).SetCellValue("施焊焊工\nWelder");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 13, 16));
            ws.GetRow(rowIndex + 3).GetCell(13).SetCellValue("检测焊接接头\nExanined Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 6));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("总数\nTotal");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 7, 8));
            ws.GetRow(rowIndex + 4).GetCell(7).SetCellValue("固定口数\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 9, 10));
            ws.GetRow(rowIndex + 4).GetCell(9).SetCellValue("焊工代号\nWelder No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 11, 12));
            ws.GetRow(rowIndex + 4).GetCell(11).SetCellValue("施焊数量\nWelded Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 13, 14));
            ws.GetRow(rowIndex + 4).GetCell(13).SetCellValue("总数\nTotal Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 15, 16));
            ws.GetRow(rowIndex + 4).GetCell(15).SetCellValue("固定口数\nField Joints");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 17, 19));
            ws.GetRow(rowIndex + 3).GetCell(17).SetCellValue("实际检测比例\nActual exam. Rate");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 20, 20));
            ws.GetRow(rowIndex + 3).GetCell(20).SetCellValue("检测报告编号\nExamination Report No.");


            for (int i = 3; i < 14; i++)
            {
                if (i == 3 || i == 4)
                {
                    ws.GetRow(rowIndex + i).Height = 30 * 20;
                    continue;
                }

                if (i == 13)
                    ws.GetRow(rowIndex + i).Height = 30 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 19 * 20;

                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 14));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 15, 16));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 17, 19));
            }
            ws.GetRow(rowIndex + 13).GetCell(0).SetCellValue("小计\nTotal");
            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 14, rowIndex + 16, style, 0, 20, true);
            //设置行高
            ws.GetRow(rowIndex + 14).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 15).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 16).Height = 20 * 20 * 7;

            ws.GetRow(rowIndex + 14).GetCell(0).SetCellValue("备注\nRemark");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 14, rowIndex + 14, 1, 20));

            ws.GetRow(rowIndex + 14).GetCell(1).CellStyle = style2;
            ws.GetRow(rowIndex + 14).GetCell(1).SetCellValue("焊口位置与检测焊口见管道单线图与无损检测报告。\nPlease refer to Pipeline Iso-drawing and NDE Report for joints position and examined joints.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 0, 3));
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("建 设 / 监 理 单 位\nOwner/JianLi Company");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 4, 9));
            ws.GetRow(rowIndex + 15).GetCell(4).SetCellValue("总 承 包 单 位\nGeneral Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 10, 16));
            ws.GetRow(rowIndex + 15).GetCell(10).SetCellValue("检 测 单 位\nExamination Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 15, rowIndex + 15, 17, 20));
            ws.GetRow(rowIndex + 15).GetCell(17).SetCellValue("施 工 单 位\nConstruction Company");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 0, 3));
            ws.GetRow(rowIndex + 16).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 4, 9));
            ws.GetRow(rowIndex + 16).GetCell(4).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(4).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 10, 16));
            ws.GetRow(rowIndex + 16).GetCell(10).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(10).SetCellValue("专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：    年   月   日");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 17, 20));
            ws.GetRow(rowIndex + 16).GetCell(17).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(17).SetCellValue("专业工程师\n Discipline Engineer: \n\n 质量检查员：\n Quality Inspector:\n\n 制表：\n Prepared：\n\n 日期Date：    年   月   日");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //水平垂直居中
            ws.HorizontallyCenter = true;
            ws.VerticallyCenter = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //25-管道无损检测结果汇总表SHT 3503-J412-2017
        private void template25(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 3, style, 1, 18, true);
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 10 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 8 * 256);
            ws.SetColumnWidth(4, 8 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 10 * 256);
            ws.SetColumnWidth(7, 8 * 256);
            ws.SetColumnWidth(8, 8 * 256);
            ws.SetColumnWidth(9, 8 * 256);
            ws.SetColumnWidth(10, 8 * 256);
            ws.SetColumnWidth(11, 10 * 256);
            ws.SetColumnWidth(12, 8 * 256);
            ws.SetColumnWidth(13, 8 * 256);
            ws.SetColumnWidth(14, 8 * 256);
            ws.SetColumnWidth(15, 10 * 256);
            ws.SetColumnWidth(16, 8 * 256);
            ws.SetColumnWidth(17, 8 * 256);
            ws.SetColumnWidth(18, 8 * 256);
            ws.GetRow(1).Height = 20 * 20 * 5;
            ws.GetRow(2).Height = 20 * 20 * 2;
            ws.GetRow(3).Height = 20 * 20 * 2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 5));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503-J412-1");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 6, 13));
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.GetRow(rowIndex + 1).GetCell(6).CellStyle = style1;
            ws.GetRow(rowIndex + 1).GetCell(6).SetCellValue("管道无损检测结果汇总表\nSummary of Piping NDT Results\n第  页 共  页 Page    of     ");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 14, 18));
            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.GetRow(rowIndex + 1).GetCell(14).CellStyle = style2;
            ws.GetRow(rowIndex + 1).GetCell(14).SetCellValue("工程名称:\nProject Name:\n\n\n\n单位工程名称:\nUnit Name:");

            ws.GetRow(rowIndex + 2).GetCell(1).SetCellValue("Supervision Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 2, 5));

            ws.GetRow(rowIndex + 2).GetCell(6).SetCellValue("Construction Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 7, 10));

            ws.GetRow(rowIndex + 2).GetCell(11).SetCellValue("Test Criteria");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 12, 14));

            ws.GetRow(rowIndex + 2).GetCell(15).SetCellValue("Piping Class");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 16, 18));

            ws.GetRow(rowIndex + 3).GetCell(1).SetCellValue("Area No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 2, 4));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 6));
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("Test Type No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 7, 10));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 11, 12));
            ws.GetRow(rowIndex + 3).GetCell(11).SetCellValue("Piping No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 13, 18));

            #endregion

            #region 表格部分
            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 4, rowIndex + 16, style, 1, 18, true);

            //第一部分表格部分
            ws.GetRow(rowIndex + 4).Height = 18 * 20 * 2;
            ws.GetRow(rowIndex + 5).Height = 18 * 20 * 2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 5, 1, 1));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("Test Method");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 2, 9));
            ws.GetRow(rowIndex + 4).GetCell(2).SetCellValue("Test Quantity Statistics\n(RT Unit:Weld/Film;UT/MT/PT/ Unit:Weld/Meter)");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 10, 18));
            ws.GetRow(rowIndex + 4).GetCell(10).SetCellValue("Non-conformity Statistics\n(RT Unit:Weld/Film;UT/MT/PT/ Unit:Weld/Meter)");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 2, 3));
            ws.GetRow(rowIndex + 5).GetCell(2).SetCellValue("Butt-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 4, 5));
            ws.GetRow(rowIndex + 5).GetCell(4).SetCellValue("Fillet-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 6, 7));
            ws.GetRow(rowIndex + 5).GetCell(6).SetCellValue("Branch Connection");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 8, 9));
            ws.GetRow(rowIndex + 5).GetCell(8).SetCellValue("Groove & Others");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 10, 11));
            ws.GetRow(rowIndex + 5).GetCell(10).SetCellValue("Butt-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 12, 13));
            ws.GetRow(rowIndex + 5).GetCell(12).SetCellValue("Fillet-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 14, 15));
            ws.GetRow(rowIndex + 5).GetCell(14).SetCellValue("Branch Connection");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 16, 18));
            ws.GetRow(rowIndex + 5).GetCell(16).SetCellValue("Groove & Others");

            ws.GetRow(rowIndex + 6).GetCell(1).SetCellValue("RT");
            ws.GetRow(rowIndex + 7).GetCell(1).SetCellValue("UT");
            ws.GetRow(rowIndex + 8).GetCell(1).SetCellValue("MT");
            ws.GetRow(rowIndex + 9).GetCell(1).SetCellValue("PT");


            for (int i = 6; i < 11; i++)
            {
                ws.GetRow(i).Height = 18 * 20;

                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 3));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 7));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 8, 9));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 10, 11));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 12, 13));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 14, 15));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 16, 18));
                if (i == 10)
                    continue;

                if (i == 6 || i == 7)
                {
                    ws.GetRow(rowIndex + i).GetCell(4).SetCellValue("-");
                    ws.GetRow(rowIndex + i).GetCell(12).SetCellValue("-");
                }
                else
                {
                    ws.GetRow(rowIndex + i).GetCell(4).SetCellValue("/");
                    ws.GetRow(rowIndex + i).GetCell(12).SetCellValue("/");
                }


                ws.GetRow(rowIndex + i).GetCell(2).SetCellValue("/");
                ws.GetRow(rowIndex + i).GetCell(6).SetCellValue("/");
                ws.GetRow(rowIndex + i).GetCell(8).SetCellValue("/");
                ws.GetRow(rowIndex + i).GetCell(10).SetCellValue("/");
                ws.GetRow(rowIndex + i).GetCell(14).SetCellValue("/");
                ws.GetRow(rowIndex + i).GetCell(16).SetCellValue("/");
            }

            //第二部分表格部分
            ws.GetRow(rowIndex + 11).Height = 20 * 20 * 3;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 1, 2));
            ws.GetRow(rowIndex + 11).GetCell(1).SetCellValue("Line No.");

            ws.GetRow(rowIndex + 11).GetCell(3).SetCellValue("weld No.");
            ws.GetRow(rowIndex + 11).GetCell(4).SetCellValue("Welder's Stamp No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 5, 6));
            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("Test Lot No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 7, 8));
            ws.GetRow(rowIndex + 11).GetCell(7).SetCellValue("RT/UT Result");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 9, 10));
            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Report No.");
            ws.GetRow(rowIndex + 11).GetCell(11).SetCellValue("MT/PT Result");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 12, 13));
            ws.GetRow(rowIndex + 11).GetCell(12).SetCellValue("Report No.");
            ws.GetRow(rowIndex + 11).GetCell(14).SetCellValue("Result");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 15, 16));
            ws.GetRow(rowIndex + 11).GetCell(15).SetCellValue("Report No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 11, rowIndex + 11, 17, 18));
            ws.GetRow(rowIndex + 11).GetCell(17).SetCellValue("Remarks");

            for (int i = 12; i < 17; i++)
            {
                ws.GetRow(rowIndex + i).Height = 18 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 10));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 12, 13));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 15, 16));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 17, 18));
            }
            #endregion

            #region 尾部

            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 17, rowIndex + 17, style, 1, 18, true);
            ws.GetRow(rowIndex + 17).Height = 20 * 20 * 5;

            var setStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            setStyle2.WrapText = true;
            ws.GetRow(rowIndex + 17).GetCell(1).CellStyle = ws.GetRow(rowIndex + 17).GetCell(7).CellStyle = ws.GetRow(rowIndex + 17).GetCell(13).CellStyle = setStyle2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 1, 6));
            ws.GetRow(rowIndex + 17).GetCell(1).SetCellValue(" Responsible Inspector:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 7, 12));
            ws.GetRow(rowIndex + 17).GetCell(7).SetCellValue(" Technical Superintendent:\n\n\n\n\n Quality Superintendent:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 17, rowIndex + 17, 13, 18));
            ws.GetRow(rowIndex + 17).GetCell(13).SetCellValue(" Inspection Agency: (Seal)\n\n\n\n\n Date:");


            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //26-管道无损检测数量统计表SHT 3503-J413-2017
        private void template26(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 6, style, 1, 23, true);
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 9 * 256);
            ws.SetColumnWidth(2, 3 * 256);
            ws.SetColumnWidth(3, 11 * 256);
            ws.SetColumnWidth(4, 3 * 256);
            ws.SetColumnWidth(5, 9 * 256);
            ws.SetColumnWidth(6, 2 * 256);
            ws.SetColumnWidth(7, 5 * 256);
            ws.SetColumnWidth(8, 5 * 256);
            ws.SetColumnWidth(9, 5 * 256);
            ws.SetColumnWidth(10, 5 * 256);
            ws.SetColumnWidth(11, 5 * 256);
            ws.SetColumnWidth(12, 5 * 256);
            ws.SetColumnWidth(13, 5 * 256);
            ws.SetColumnWidth(14, 5 * 256);
            ws.SetColumnWidth(15, 5 * 256);
            ws.SetColumnWidth(16, 5 * 256);
            ws.SetColumnWidth(17, 5 * 256);
            ws.SetColumnWidth(18, 5 * 256);
            ws.SetColumnWidth(19, 5 * 256);
            ws.SetColumnWidth(20, 5 * 256);
            ws.SetColumnWidth(21, 5 * 256);
            ws.SetColumnWidth(22, 5 * 256);
            ws.SetColumnWidth(23, 9 * 256);

            for (int i = 1; i < 6; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
            }
            ws.GetRow(rowIndex + 6).Height = 40 * 20;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 5, 1, 3));
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("SH/T 3503-J413-1");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 5, 4, 16));
            ws.GetRow(rowIndex + 1).GetCell(4).SetCellValue("管道无损检测数量统计表 ;\n Piping NDT Quantity Statistical From ;\n 第  页 共  页 Page   of      ");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 1).GetCell(4).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 5, 17, 23));
            ws.GetRow(rowIndex + 1).GetCell(17).SetCellValue("工程名称： \n Projeck Name: \n \n \n 单位工程名称：\n Unit Name:     ");
            var setStyle1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            setStyle1.WrapText = true;
            ws.GetRow(rowIndex + 1).GetCell(17).CellStyle = setStyle1;

            ws.GetRow(rowIndex + 6).GetCell(1).SetCellValue("Area No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 2, 3));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 4, 5));
            ws.GetRow(rowIndex + 6).GetCell(4).SetCellValue("Test Type No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 6, 11));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 12, 14));
            ws.GetRow(rowIndex + 6).GetCell(12).SetCellValue("Acceptance Criteria");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 15, 18));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 19, 20));
            ws.GetRow(rowIndex + 6).GetCell(19).SetCellValue("Test Criteria");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 21, 23));

            #endregion

            #region 表格部分

            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 7, rowIndex + 18, style, 1, 23, true);

            ws.GetRow(rowIndex + 7).Height = 30 * 20;
            ws.GetRow(rowIndex + 8).Height = 40 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 9, 1, 2));
            ws.GetRow(rowIndex + 7).GetCell(1).SetCellValue("Piping No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 9, 3, 4));
            ws.GetRow(rowIndex + 7).GetCell(3).SetCellValue("Included Line No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 9, 5, 6));
            ws.GetRow(rowIndex + 7).GetCell(5).SetCellValue("Test Percentage");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 7, 22));
            ws.GetRow(rowIndex + 7).GetCell(7).SetCellValue("Qualified Quantity");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 8, 23, 23));
            ws.GetRow(rowIndex + 7).GetCell(23).SetCellValue("Remarks");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 8, 7, 11));
            ws.GetRow(rowIndex + 8).GetCell(7).SetCellValue("Butt-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 8, 12, 14));
            ws.GetRow(rowIndex + 8).GetCell(12).SetCellValue("Fillet-welded Joint");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 8, 15, 19));
            ws.GetRow(rowIndex + 8).GetCell(15).SetCellValue("Branch Connection");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 8, 20, 22));
            ws.GetRow(rowIndex + 8).GetCell(20).SetCellValue("Groove & Others");

            ws.GetRow(rowIndex + 9).GetCell(7).SetCellValue("Total");
            ws.GetRow(rowIndex + 9).GetCell(8).SetCellValue("RT");
            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("UT");
            ws.GetRow(rowIndex + 9).GetCell(10).SetCellValue("MT");
            ws.GetRow(rowIndex + 9).GetCell(11).SetCellValue("PT");
            ws.GetRow(rowIndex + 9).GetCell(12).SetCellValue("Total");
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("MT");
            ws.GetRow(rowIndex + 9).GetCell(14).SetCellValue("PT");
            ws.GetRow(rowIndex + 9).GetCell(15).SetCellValue("Total");
            ws.GetRow(rowIndex + 9).GetCell(16).SetCellValue("RT");
            ws.GetRow(rowIndex + 9).GetCell(17).SetCellValue("UT");
            ws.GetRow(rowIndex + 9).GetCell(18).SetCellValue("MT");
            ws.GetRow(rowIndex + 9).GetCell(19).SetCellValue("PT");
            ws.GetRow(rowIndex + 9).GetCell(20).SetCellValue("Total");
            ws.GetRow(rowIndex + 9).GetCell(21).SetCellValue("MT");
            ws.GetRow(rowIndex + 9).GetCell(22).SetCellValue("PT");

            for (int i = 10; i < 19; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 2));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 4));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
                ws.GetRow(rowIndex + i).Height = 20 * 20;

            }

            #endregion

            #region 尾部
            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 19, rowIndex + 20, style, 1, 23, true);
            ws.GetRow(rowIndex + 19).Height = 30 * 20;
            ws.GetRow(rowIndex + 20).Height = 20 * 20 * 7;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 1, 7));
            ws.GetRow(rowIndex + 19).GetCell(1).SetCellValue("Owner/Supervision Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 8, 15));
            ws.GetRow(rowIndex + 19).GetCell(8).SetCellValue("General Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 19, rowIndex + 19, 16, 23));
            ws.GetRow(rowIndex + 19).GetCell(16).SetCellValue("Construction Contractor");


            var setStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            setStyle2.WrapText = true;
            ws.GetRow(rowIndex + 20).GetCell(1).CellStyle = ws.GetRow(rowIndex + 20).GetCell(8).CellStyle = ws.GetRow(rowIndex + 20).GetCell(16).CellStyle = setStyle2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 1, 7));
            ws.GetRow(rowIndex + 20).GetCell(1).SetCellValue(" Discipline Engineer: \n \n \n \n \n \n \n \n Date:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 8, 15));
            ws.GetRow(rowIndex + 20).GetCell(8).SetCellValue(" Discipline Engineer: \n \n \n \n \n \n \n \n Date:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 16, 23));
            ws.GetRow(rowIndex + 20).GetCell(16).SetCellValue(" Quality Inspector: \n \n Discipline Engineer:  \n \n From Prepared by: \n \n \n \n Date:");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //27-TP-11-尾项清单UG-FW-001
        private void template27(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, false, "Arial Unicode MS");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 12, true, false, "Arial Unicode MS");

            var style3 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 16, true, true, "Arial Unicode MS");

            var style4 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 24, true, true, "Arial Unicode MS");
            #region 头部
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 7, style, 0, 24, true);

            //设置行高和列宽
            for (int i = 0; i < 23; i++)
            {
                ws.SetColumnWidth(i, 7 * 256);
            }
            ws.SetColumnWidth(23, 6 * 256);
            ws.SetColumnWidth(24, 6 * 256);

            ws.GetRow(rowIndex).Height = 10 * 20;
            ws.GetRow(rowIndex + 1).Height = 10 * 20 * 5;
            ws.GetRow(rowIndex + 2).Height = 8 * 20;
            ws.GetRow(rowIndex + 3).Height = 10 * 20 * 4;
            ws.GetRow(rowIndex + 4).Height = 20 * 20;
            ws.GetRow(rowIndex + 5).Height = 20 * 20;
            ws.GetRow(rowIndex + 6).Height = 20 * 20;
            ws.GetRow(rowIndex + 7).Height = 35 * 20;


            //合并单元格和填充文本
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 22, 24));
            ws.GetRow(rowIndex).GetCell(22).SetCellValue("Form No.   TP-11");
            ws.GetRow(rowIndex).GetCell(22).CellStyle = style1;

            //画线
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex, rowIndex, 0, 24), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 6, 18));
            ws.GetRow(rowIndex + 1).GetCell(6).SetCellValue("巴斯夫（广东）一体化项目\nBASF (Guangdong) Integrated Project");
            ws.GetRow(rowIndex + 1).GetCell(6).CellStyle = style3;

            //画线
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 1, rowIndex + 1, 0, 24), ws);
            //画线
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 2, rowIndex + 2, 0, 24), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 6, 3, 15));
            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("PUNCH LIST\n尾项清单");
            ws.GetRow(rowIndex + 3).GetCell(3).CellStyle = style4;



            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 16, 18));
            ws.GetRow(rowIndex + 3).GetCell(16).CellStyle = style1;
            ws.GetRow(rowIndex + 3).GetCell(16).SetCellValue("项目/PROJECT");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 19, 24));
            ws.GetRow(rowIndex + 3).GetCell(19).CellStyle = style1;
            ws.GetRow(rowIndex + 3).GetCell(19).SetCellValue("巴斯夫（广东）一体化项目\nBASF (Guangdong) Integrated Project");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 16, 18));
            ws.GetRow(rowIndex + 4).GetCell(16).CellStyle = style1;
            ws.GetRow(rowIndex + 4).GetCell(16).SetCellValue("区域/AREA");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 19, 24));
            ws.GetRow(rowIndex + 4).GetCell(19).CellStyle = style1;
            ws.GetRow(rowIndex + 4).GetCell(19).SetCellValue("C400/D400");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 16, 18));
            ws.GetRow(rowIndex + 5).GetCell(16).CellStyle = style1;
            ws.GetRow(rowIndex + 5).GetCell(16).SetCellValue("试压包号/TEST PACKAGE No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 6, 19, 24));
            ws.GetRow(rowIndex + 5).GetCell(19).CellStyle = style1;
            ws.GetRow(rowIndex + 5).GetCell(19).SetCellValue("UG-130-FW-HT-001");
            //画线
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 6, rowIndex + 6, 0, 24), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 4, rowIndex + 4, 16, 24), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 3, rowIndex + 3, 16, 24), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 3, rowIndex + 6, 18, 18), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 3, rowIndex + 6, 15, 15), ws);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 0, 2));
            ws.GetRow(rowIndex + 7).GetCell(0).CellStyle = style1;
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("系统号\nSYSTEM No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 3, 15));
            ws.GetRow(rowIndex + 7).GetCell(3).CellStyle = style1;
            ws.GetRow(rowIndex + 7).GetCell(3).SetCellValue("UG");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 16, 18));
            ws.GetRow(rowIndex + 7).GetCell(16).CellStyle = style1;
            ws.GetRow(rowIndex + 7).GetCell(16).SetCellValue("子系统号\nSUB-SYSTEM No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 19, 24));
            ws.GetRow(rowIndex + 7).GetCell(19).CellStyle = style1;
            ws.GetRow(rowIndex + 7).GetCell(19).SetCellValue("FW");
            //画线
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 7, rowIndex + 7, 2, 2), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 7, rowIndex + 7, 15, 15), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex + 7, rowIndex + 7, 18, 18), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(rowIndex + 7, rowIndex + 7, 0, 24), ws);


            //插入图片  
            InsertImage(hssfworkbook, ws, rowIndex + 1, 1, rowIndex + 1, 2, img1, 1.8, 1);
            InsertImage(hssfworkbook, ws, rowIndex + 1, 4, rowIndex + 1, 5, img2, 1.8, 1, 0, 1);
            InsertImage(hssfworkbook, ws, rowIndex + 1, 19, rowIndex + 1, 20, img3, 1.8, 0.7, 0, 10);
            InsertImage(hssfworkbook, ws, rowIndex + 1, 21, rowIndex + 1, 23, img4, 1.2, 0.9, 0, 5);

            #endregion

            #region 表格部分

            var style5 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 8, rowIndex + 25, style5, 0, 24, true);

            //设置行高
            ws.GetRow(rowIndex + 8).Height = 10 * 20 * 3;
            ws.GetRow(rowIndex + 9).Height = 30 * 20;
            ws.GetRow(rowIndex + 10).Height = 10 * 20 * 4;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 10, 0, 0));
            ws.GetRow(rowIndex + 8).GetCell(0).SetCellValue("序号\nS/N");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 10, 1, 5));
            ws.GetRow(rowIndex + 8).GetCell(1).SetCellValue("图纸号\nDrawing No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 10, 6, 6));
            ws.GetRow(rowIndex + 8).GetCell(6).SetCellValue("版本\nRev No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 10, 7, 15));
            ws.GetRow(rowIndex + 8).GetCell(7).SetCellValue("尾项描述\nPunch Description");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 10, 16, 16));
            ws.GetRow(rowIndex + 8).GetCell(16).SetCellValue("尾项类别\n* Punch Category");


            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 9, 17, 18));
            ws.GetRow(rowIndex + 8).GetCell(17).SetCellValue("提出人\nOriginator");
            ws.GetRow(rowIndex + 10).GetCell(17).SetCellValue("姓名\nName");
            ws.GetRow(rowIndex + 10).GetCell(18).SetCellValue("单位\nCompany");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 8, rowIndex + 8, 19, 24));
            ws.GetRow(rowIndex + 8).GetCell(19).SetCellValue("尾项关闭\nRemedial Acceptance and Signature");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 9, rowIndex + 9, 19, 20));
            ws.GetRow(rowIndex + 9).GetCell(19).SetCellValue("CC7");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 9, rowIndex + 9, 21, 22));
            ws.GetRow(rowIndex + 9).GetCell(21).SetCellValue("Worley/BASF");

            ws.GetRow(rowIndex + 10).GetCell(19).SetCellValue("签名\nSign");
            ws.GetRow(rowIndex + 10).GetCell(20).SetCellValue("日期Date");
            ws.GetRow(rowIndex + 10).GetCell(21).SetCellValue("签名\nSign");
            ws.GetRow(rowIndex + 10).GetCell(22).SetCellValue("日期Date");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 9, rowIndex + 10, 23, 24));
            ws.GetRow(rowIndex + 9).GetCell(23).SetCellValue("Remark");

            for (int i = 11; i < 26; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 1, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 15));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 23, 24));
            }

            #endregion

            #region 尾部

            var style6 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 8, false, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 26, rowIndex + 30, style6, 0, 24, true);

            ws.GetRow(rowIndex + 26).Height = 8 * 20;
            for (int i = 27; i < 31; i++)
            {
                ws.GetRow(rowIndex + i).Height = 10 * 20;
            }
            ws.GetRow(rowIndex + 27).GetCell(0).SetCellValue("LEGEND");
            ws.GetRow(rowIndex + 27).GetCell(1).SetCellValue(" N.A.: Not Applicable");
            ws.GetRow(rowIndex + 27).GetCell(10).SetCellValue("*PUNCH CATEGORY:");
            ws.GetRow(rowIndex + 28).GetCell(11).SetCellValue("A - PUNCH ITEM MUST BE COMPLETED BEFORE TESTING.");
            ws.GetRow(rowIndex + 29).GetCell(11).SetCellValue("B - PUNCH ITEM TO BE COMPLETED AFTER TESTING BUT SHALL BE COMPLETED PRIOR TO SYSTEM TURN-OVER");
            ws.GetRow(rowIndex + 30).GetCell(11).SetCellValue("C - PUNCH ITEM TO BE COMPLETED AFTER SYSTEM TURNOVER.");

            //划线
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex, rowIndex + 25, 24, 24), ws);
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //横向打印
            ws.PrintSetup.Landscape = true;
            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;

            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);
        }

        //28-TP-12-试压用水（工具）检查清单UG-FW-001
        private void template28(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 14, style, 0, 17, true);
            ws.GetRow(rowIndex).GetCell(15).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(16).SetCellValue("TP-06");
            //设置列宽度
            ws.SetColumnWidth(0, 2 * 256);
            ws.SetColumnWidth(1, 1 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 5 * 256);
            ws.SetColumnWidth(4, 5 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 10 * 256);
            ws.SetColumnWidth(8, 10 * 256);
            ws.SetColumnWidth(9, 11 * 256);
            ws.SetColumnWidth(10, 9 * 256);
            ws.SetColumnWidth(11, 8 * 256);
            ws.SetColumnWidth(12, 1 * 256);
            ws.SetColumnWidth(13, 9 * 256);
            ws.SetColumnWidth(14, 9 * 256);
            ws.SetColumnWidth(15, 9 * 256);
            ws.SetColumnWidth(16, 8 * 256);
            ws.SetColumnWidth(17, 1 * 256);
            //设置前3行高度
            ws.GetRow(0).Height = 15 * 20;
            ws.GetRow(1).Height = 15 * 20;
            ws.GetRow(2).Height = 14 * 20;

            //设置3-15行的行高度
            for (int i = 3; i < 15; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
            }

            RegionUtil.SetBorderBottom(2, new CellRangeAddress(0, 0, 1, 1), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 1, 17, 17), ws);

            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 16, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 17, 17), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(1, 1, 2, 16), ws);
            RegionUtil.SetBorderTop(2, new CellRangeAddress(2, 2, 2, 16), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(1, 14, 0, 0), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 1, 1), ws);

            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 16, 16), ws);
            RegionUtil.SetBorderRight(2, new CellRangeAddress(2, 14, 17, 17), ws);


            RegionUtil.SetBorderLeft(2, new CellRangeAddress(9, 14, 2, 2), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(7, 7, 2, 16), ws);
            RegionUtil.SetBorderBottom(2, new CellRangeAddress(8, 8, 2, 16), ws);
            //插入图片  
            InsertImage(hssfworkbook, ws, 3, 2, 4, 3, img1, 1.2, 1.8);
            InsertImage(hssfworkbook, ws, 3, 3, 4, 4, img2, 1.9, 1.9);
            InsertImage(hssfworkbook, ws, 3, 13, 4, 14, img3, 1.5, 1.5);
            InsertImage(hssfworkbook, ws, 3, 15, 4, 16, img4, 1.5, 1.5);

            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目");
            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 5, 13));
            ws.GetRow(rowIndex + 4).GetCell(5).SetCellValue("BASF (GUANGDONG) INTEGRATED PROJECT");
            ws.GetRow(rowIndex + 4).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 5, rowIndex + 5, 5, 13));
            ws.GetRow(rowIndex + 5).GetCell(5).SetCellValue("试压用水（工具）检查清单");
            ws.GetRow(rowIndex + 5).GetCell(5).CellStyle = setStyle;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 6, rowIndex + 6, 5, 13));
            ws.GetRow(rowIndex + 6).GetCell(5).SetCellValue("WATER(MACHINE) CALIBREATION LIST");
            ws.GetRow(rowIndex + 6).GetCell(5).CellStyle = setStyle;

            var cellStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 11, false, false, "Arial Unicode MS");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("Test Package No");
            ws.GetRow(rowIndex + 9).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("UG-130-FW-HT-001");
            ws.GetRow(rowIndex + 9).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 9).GetCell(9).SetCellValue("Area");
            ws.GetRow(rowIndex + 9).GetCell(9).CellStyle = cellStyle2;
            ws.GetRow(rowIndex + 9).GetCell(13).SetCellValue("C400");

            ws.GetRow(rowIndex + 10).GetCell(2).SetCellValue("试压包号");
            ws.GetRow(rowIndex + 10).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 10).GetCell(9).SetCellValue("区域");
            ws.GetRow(rowIndex + 10).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(2).SetCellValue("System No");
            ws.GetRow(rowIndex + 11).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(5).SetCellValue("FIRE WATER");
            ws.GetRow(rowIndex + 11).GetCell(5).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(9).SetCellValue("Test Pressure");
            ws.GetRow(rowIndex + 11).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 11).GetCell(13).SetCellValue("2");
            ws.GetRow(rowIndex + 11).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(2).SetCellValue("系统号");
            ws.GetRow(rowIndex + 12).GetCell(2).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 12).GetCell(9).SetCellValue("试验压力");
            ws.GetRow(rowIndex + 12).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(9).SetCellValue("Test Type");
            ws.GetRow(rowIndex + 13).GetCell(9).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 13).GetCell(13).SetCellValue("Hydro Test");
            ws.GetRow(rowIndex + 13).GetCell(13).CellStyle = cellStyle2;

            ws.GetRow(rowIndex + 14).GetCell(9).SetCellValue("试验方式");
            ws.GetRow(rowIndex + 14).GetCell(9).CellStyle = cellStyle2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 5, 13));
            #endregion

            #region  表格部分

            style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 11, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, 15, rowIndex + 49, style, 0, 17, true);
            for (int i = 15; i < 50; i++)
            {
                ws.GetRow(i).Height = 25 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 3, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 8));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 9, 12));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 13, 14));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 15, 16));
            }
            ws.GetRow(15).Height = 30 * 20;
            //数据表头部分
            ws.GetRow(rowIndex + 15).GetCell(2).SetCellValue("No\r\n序号");
            ws.GetRow(rowIndex + 15).GetCell(3).SetCellValue("Report Name\r\n报告名称");
            ws.GetRow(rowIndex + 15).GetCell(6).SetCellValue("Report No.\r\n报告编号");
            ws.GetRow(rowIndex + 15).GetCell(9).SetCellValue("Date of Issue report\r\n报告出具日期");
            ws.GetRow(rowIndex + 15).GetCell(13).SetCellValue("Expiry Date\r\n有效期");
            ws.GetRow(rowIndex + 15).GetCell(15).SetCellValue("Remark\r\n备注");

            #endregion

            #region 尾部

            //此处的尾部行数需要根据 得到的动态数据量 来计算，默认写死从50行开始。
            ws = ExcelCreateRow(ws, hssfworkbook, 49, rowIndex + 55, style, 0, 17, true);
            for (int i = 49; i <= 55; i++)
            {
                ws.GetRow(i).Height = 18 * 20;
                ws.GetRow(i).GetCell(0).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.Medium);
                ws.GetRow(i).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium);
            }

            for (int i = 2; i < 17; i++)
            {
                ws.GetRow(rowIndex + 55).GetCell(i).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            }
            ws.GetRow(rowIndex + 55).GetCell(1).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(16).CellStyle = SetStyle(hssfworkbook, BorderStyle.Medium, BorderStyle.Medium, BorderStyle.None, BorderStyle.None);
            ws.GetRow(rowIndex + 55).GetCell(17).CellStyle = SetStyle(hssfworkbook, BorderStyle.None, BorderStyle.Medium, BorderStyle.None, BorderStyle.Medium);
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 2, 4));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 5, 6));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 7, 9));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 10, 13));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 50, rowIndex + 52, 14, 16));
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 2, 4));
            ws.GetRow(rowIndex + 53).GetCell(2).SetCellValue("PREPARED");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 53, 5, 6));
            ws.GetRow(rowIndex + 53).GetCell(5).SetCellValue("REVIEW");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 7, 9));
            ws.GetRow(rowIndex + 53).GetCell(7).SetCellValue("JIANLI");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 10, 13));
            ws.GetRow(rowIndex + 53).GetCell(10).SetCellValue("Worley");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 53, rowIndex + 54, 14, 16));
            ws.GetRow(rowIndex + 53).GetCell(14).SetCellValue("BASF");
            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 54, rowIndex + 54, 2, 6));
            ws.GetRow(rowIndex + 54).GetCell(2).SetCellValue("CC7");
            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //32-管道系统压力试验记录SHT 3503-J406-2
        private void template32(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region  头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 2, style, 0, 8, true);
            //设置行高度
            ws.GetRow(rowIndex).Height = 20 * 20 * 6;
            ws.GetRow(rowIndex + 1).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 2).Height = 20 * 20 * 2;

            //设置列宽度
            ws.SetColumnWidth(0, 24 * 256);
            ws.SetColumnWidth(1, 9 * 256);
            ws.SetColumnWidth(2, 9 * 256);
            ws.SetColumnWidth(3, 9 * 256);
            ws.SetColumnWidth(4, 9 * 256);
            ws.SetColumnWidth(5, 9 * 256);
            ws.SetColumnWidth(6, 9 * 256);
            ws.SetColumnWidth(7, 9 * 256);
            ws.SetColumnWidth(8, 9 * 256);

            //合并单元格和填充文本
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503—J406-2");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 1, 5));
            ws.GetRow(rowIndex).GetCell(1).CellStyle = style1;
            ws.GetRow(rowIndex).GetCell(1).SetCellValue("管道系统压力试验记录\nPiping System Pressure Test Record");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 6, 8));
            ws.GetRow(rowIndex).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex).GetCell(6).SetCellValue(" 项目名称：\n Project Name：\n\n\n\n 单位名称：\n Unit Name:");

            ws.GetRow(rowIndex + 1).GetCell(0).SetCellValue("系统名称\nSystem Description");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 1, 3));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 4, 5));
            ws.GetRow(rowIndex + 1).GetCell(4).SetCellValue("系统编号\nSystem No.");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 1, 6, 8));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 2, rowIndex + 2, 0, 8));
            ws.GetRow(rowIndex + 2).GetCell(0).SetCellValue("试验记录\nTest Record");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 3, rowIndex + 15, style, 0, 8, true);

            //设置行高
            ws.GetRow(rowIndex + 3).Height = 20 * 20 * 5;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 0, 1));
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("管道编号/单线号\nPiping No./ Line No.");
            ws.GetRow(rowIndex + 3).GetCell(2).SetCellValue("设计压力\nDesign Pressure Mpa");
            ws.GetRow(rowIndex + 3).GetCell(3).SetCellValue("设计温度\nDesign Temperature ℃");
            ws.GetRow(rowIndex + 3).GetCell(4).SetCellValue("试验环境温度\nTest Ambient Temperature ℃");
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("试验介质\nTest Medium");
            ws.GetRow(rowIndex + 3).GetCell(6).SetCellValue("试验介质温度\nTest Medium Temperature ℃");
            ws.GetRow(rowIndex + 3).GetCell(7).SetCellValue("试验压力\nTest Pressure Mpa");
            ws.GetRow(rowIndex + 3).GetCell(8).SetCellValue("稳压时间\nHolding Time min");
            for (int i = 4; i < 16; i++)
            {
                ws.GetRow(rowIndex + i).Height = 38 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
            }

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 16, rowIndex + 18, style, 0, 8, true);

            //设置行高
            ws.GetRow(rowIndex + 16).Height = 50 * 20;
            ws.GetRow(rowIndex + 17).Height = 50 * 20;
            ws.GetRow(rowIndex + 18).Height = 150 * 20;
            //合并单元格填充文本数据
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 16, rowIndex + 16, 0, 8));
            ws.GetRow(rowIndex + 16).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("试验结论：\nConclusion");

            for (int i = 17; i < 19; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 8));
            }
            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("建设/监理单位\nOwner/Construction Supervision Contractor");
            ws.GetRow(rowIndex + 17).GetCell(2).SetCellValue("总承包单位\nGeneral Contractor");
            ws.GetRow(rowIndex + 17).GetCell(6).SetCellValue("施工单位\nConstruction Company");

            ws.GetRow(rowIndex + 18).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 18).GetCell(2).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(2).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 18).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(6).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n 质量检查员：\n Quality Inspector:\n\n 班（组）长：\n Leader:\n\n 日期Date：");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //33-管道吹扫清洗记录SHT 3503-J408 UG-FW-001
        private void template33(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 7, style, 0, 6, true);
            //设置头部行高
            ws.GetRow(rowIndex).Height = 20 * 20 * 5;
            ws.GetRow(rowIndex + 1).Height = 20 * 20;
            ws.GetRow(rowIndex + 2).Height = 20 * 20;
            ws.GetRow(rowIndex + 3).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 4).Height = 20 * 20;
            ws.GetRow(rowIndex + 5).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 6).Height = 20 * 20;
            ws.GetRow(rowIndex + 7).Height = 20 * 20 * 2;
            //设置列宽
            ws.SetColumnWidth(0, 24 * 256);
            ws.SetColumnWidth(1, 9 * 256);
            ws.SetColumnWidth(2, 14 * 256);
            ws.SetColumnWidth(3, 19 * 256);
            ws.SetColumnWidth(4, 14 * 256);
            ws.SetColumnWidth(5, 5 * 256);
            ws.SetColumnWidth(6, 9 * 256);

            //合并单元格和填充单元格值
            for (int i = 0; i < 3; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 3));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 6));
            }

            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T   3503-J408");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.GetRow(rowIndex).GetCell(2).CellStyle = style1;
            ws.GetRow(rowIndex).GetCell(2).SetCellValue("管道吹扫/清洗检验记录(I)\nPipline Flushing and Blowing Inspection Record(I)");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.GetRow(rowIndex).GetCell(4).CellStyle = style2;
            ws.GetRow(rowIndex).GetCell(4).SetCellValue(" 项目名称：巴斯夫（广东）一体化项目\n Project Name：BASF (Guangdong) Integrated Project\n\n\n\n 单位名称：Citral\n Unit Name:Citral");

            ws.GetRow(rowIndex + 1).GetCell(0).SetCellValue("子系统名称 Subsystem Name");
            ws.GetRow(rowIndex + 1).GetCell(2).SetCellValue("子系统编号 Subsystem No.");
            ws.GetRow(rowIndex + 1).GetCell(4).SetCellValue("试压包号 Test Package No.");

            ws.GetRow(rowIndex + 2).GetCell(0).SetCellValue("Fire Water");
            ws.GetRow(rowIndex + 2).GetCell(2).SetCellValue("UG-FW");
            ws.GetRow(rowIndex + 2).GetCell(4).SetCellValue("UG-130-FW-HT-001");

            for (int i = 3; i < 8; i++)
            {
                if (i == 3 || i == 5 || i == 7)
                    ws.GetRow(rowIndex + i).Height = 20 * 20 * 2;
                else
                    ws.GetRow(rowIndex + i).Height = 20 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 5));
            }
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("检查项目及要求\nInspection items and requirements");
            ws.GetRow(rowIndex + 3).GetCell(6).SetCellValue("检查结果\nResult");

            ws.GetRow(rowIndex + 4).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("管线压力试验检查合格。Pipeline pressure test is acceptable.");

            ws.GetRow(rowIndex + 5).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("与吹扫及清洗无关的安全附件和仪表元件已经拆除或按要求隔离。Safety attachments and instruments not involved in purging and cleaning have been dismantled or isolated as per requirement.");

            ws.GetRow(rowIndex + 6).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 6).GetCell(0).SetCellValue("管线系统内阀门已按要求开启。All piping system valves have been opened.");

            ws.GetRow(rowIndex + 7).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("不锈钢管线系统清洗用水应符合规范要求。Test use water of stainless steel pipeline shall be in compliance with specification.");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 8, rowIndex + 24, style, 0, 6, true);
            //循环合并单元格和设置行高
            for (int i = 8; i < 25; i++)
            {
                if (i == 8)
                    ws.GetRow(rowIndex + i).Height = 30 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 20 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
            }
            ws.GetRow(rowIndex + 8).GetCell(0).SetCellValue("管道编号\nPipeline No.");
            ws.GetRow(rowIndex + 8).GetCell(2).SetCellValue("管线材质\nMaterial");
            ws.GetRow(rowIndex + 8).GetCell(3).SetCellValue("操作介质\nOperation Medium");
            ws.GetRow(rowIndex + 8).GetCell(4).SetCellValue("吹扫介质\nBlowing Meadium");
            ws.GetRow(rowIndex + 8).GetCell(5).SetCellValue("清洗介质\nFlushing Medium");

            ws.GetRow(rowIndex + 9).GetCell(0).SetCellValue("1701-130-9062.058-0000");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("A53-B");
            ws.GetRow(rowIndex + 9).GetCell(3).SetCellValue("Fire Water");
            ws.GetRow(rowIndex + 9).GetCell(4).SetCellValue("Air");
            ws.GetRow(rowIndex + 9).GetCell(5).SetCellValue("Water");

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 25, rowIndex + 27, style, 0, 6, true);
            //设置行高度
            ws.GetRow(rowIndex + 25).Height = 20 * 20 * 3;
            ws.GetRow(rowIndex + 26).Height = 20 * 20 * 3;
            ws.GetRow(rowIndex + 27).Height = 20 * 20 * 7;

            //合并单元格合和填充值
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 6));
            ws.GetRow(rowIndex + 25).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("检验方法及结果：\nInspection method and conclusion:");

            for (int i = 26; i < 28; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 3));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 6));
            }
            ws.GetRow(rowIndex + 26).GetCell(0).SetCellValue("建设/监理单位\nOwner/Construction Supervision Contractor");
            ws.GetRow(rowIndex + 26).GetCell(2).SetCellValue("总承包单位\nGeneral Contractor");
            ws.GetRow(rowIndex + 26).GetCell(4).SetCellValue("施工单位\nConstruction Company");

            ws.GetRow(rowIndex + 27).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 27).GetCell(0).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 27).GetCell(2).CellStyle = style2;
            ws.GetRow(rowIndex + 27).GetCell(2).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 27).GetCell(4).CellStyle = style2;
            ws.GetRow(rowIndex + 27).GetCell(4).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n 质量检查员：\n Quality Inspector:\n\n 班（组）长：\n Leader:\n\n 日期Date：");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //34-管道系统压力试验条件确认记录SHT 3503-J406-1
        private void template34(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 5, style, 0, 8, true);

            //循环设置表头高度
            for (int i = 0; i < 6; i++)
            {
                ws.GetRow(rowIndex + i).Height = 20 * 20;
            }
            //设置每列的宽度
            ws.SetColumnWidth(0, 19 * 256);
            ws.SetColumnWidth(1, 9 * 256);
            ws.SetColumnWidth(2, 9 * 256);
            ws.SetColumnWidth(3, 9 * 256);
            ws.SetColumnWidth(4, 9 * 256);
            ws.SetColumnWidth(5, 9 * 256);
            ws.SetColumnWidth(6, 9 * 256);
            ws.SetColumnWidth(7, 9 * 256);
            ws.SetColumnWidth(8, 9 * 256);

            //合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex + 3, 0, 0));
            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T 3503—J406-1");

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 14, true, true, "Arial Unicode MS");
            style1.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex + 3, 1, 5));
            ws.GetRow(rowIndex).GetCell(1).CellStyle = style1;
            ws.GetRow(rowIndex).GetCell(1).SetCellValue("管道系统压力试验条件确认记录\nPiping System Pressure Test Condition Confirmation Record");

            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, true, false, "Arial Unicode MS");
            style2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex + 3, 6, 8));
            ws.GetRow(rowIndex).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex).GetCell(6).SetCellValue(" 工程名称：\n Project Name:\n\n 单位工程名称：\n Unit Name:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 5, 0, 0));
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("系统名称\nSystem Description");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 5, 1, 3));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 5, 4, 5));
            ws.GetRow(rowIndex + 4).GetCell(4).SetCellValue("系统编号\nSystem No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 5, 6, 8));
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 6, rowIndex + 19, style, 0, 8, true);
            //循环设置高度和合并单元格
            for (int i = 6; i < 20; i++)
            {
                if (i == 13)
                    ws.GetRow(rowIndex + i).Height = 43 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 42 * 20;
                if (i == 6)
                {
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 0, 7));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 8, 8));
                    continue;
                }
                if (i == 7)
                    continue;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 7));
            }
            ws.GetRow(rowIndex + 6).GetCell(0).SetCellValue("检查项目与要求\nInspection Item and Requirement");
            ws.GetRow(rowIndex + 6).GetCell(8).SetCellValue("检查结果\nInspection Result");
            ws.GetRow(rowIndex + 8).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 8).GetCell(0).SetCellValue("管道安装符合最新设计文件和规范要求。Pipe installation must be in compliance with latest design documents and specification.");
            ws.GetRow(rowIndex + 9).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 9).GetCell(0).SetCellValue("管道组成件复验合格。Pipline components have been re-inspected and are accepatble.");
            ws.GetRow(rowIndex + 10).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 10).GetCell(0).SetCellValue("焊接工作记录齐全。Welders complete operation records are available.");
            ws.GetRow(rowIndex + 11).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 11).GetCell(0).SetCellValue("无损检测符合设计文件和规范要求。NDE results must be in compliance with design document and specification.");
            ws.GetRow(rowIndex + 12).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 12).GetCell(0).SetCellValue("热处理结果符合设计文件和规范要求。PWHT results must be in compliance with design document and specification.");
            ws.GetRow(rowIndex + 13).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 13).GetCell(0).SetCellValue("支、吊架安装正确。Support and hangers must be correctly installed.");
            ws.GetRow(rowIndex + 14).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 14).GetCell(0).SetCellValue("合金钢管道材质标记清楚。Identifications on material of alloy steel pipline are clear.");
            ws.GetRow(rowIndex + 15).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("不参与管道系统试验的 安全附件、仪表已按规定拆除或隔离，参与试压的系统内的阀门已开启。Safety attachments and instruments not involved in test have been dismatled or isolated as requirement, all system valves involved in test have been opened. ");
            ws.GetRow(rowIndex + 16).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("临时加固措施、盲板位置与标识符和施工方案要求。Temporary reinforcement measures, blind position and markings must be incompliance with Specification.");
            ws.GetRow(rowIndex + 17).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("焊接接头及需要检验的部位未被覆盖。Welds and other positions to be tested have not yet been painted and heat-insulated.");
            ws.GetRow(rowIndex + 18).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue("试压用压力表量程、精度等级、检定状态符合规范要求。Scale, accuracy and calibration state of test use pressure gauge must be incompliance with specification. ");
            ws.GetRow(rowIndex + 19).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 19).GetCell(0).SetCellValue("不锈钢管道试验用水符合规范要求。Test use water of stainless steel pipline must be incompliance with specification.");

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 20, rowIndex + 22, style, 0, 8, true);
            ws.GetRow(rowIndex + 20).Height = 20 * 20 * 2;
            ws.GetRow(rowIndex + 21).Height = 20 * 20 * 3;
            ws.GetRow(rowIndex + 22).Height = 20 * 20 * 7;

            //循环合并单元格
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 0, 8));
            for (int i = 21; i < 23; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 5));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 6, 8));
            }

            //填充文本
            ws.GetRow(rowIndex + 20).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 20).GetCell(0).SetCellValue("备注：\nRemark");

            ws.GetRow(rowIndex + 21).GetCell(0).SetCellValue("建设/监理单位\nOwner/Construction Supervision Contractor");
            ws.GetRow(rowIndex + 21).GetCell(2).SetCellValue("总承包单位\nGeneral Contractor");
            ws.GetRow(rowIndex + 21).GetCell(6).SetCellValue("施工单位\nConstruction Company");

            ws.GetRow(rowIndex + 22).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 22).GetCell(0).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 22).GetCell(2).CellStyle = style2;
            ws.GetRow(rowIndex + 22).GetCell(2).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n\n\n\n\n\n\n 日期Date：");
            ws.GetRow(rowIndex + 22).GetCell(6).CellStyle = style2;
            ws.GetRow(rowIndex + 22).GetCell(6).SetCellValue(" 专业工程师\n Discipline Engineer: \n\n 质量检查员：\n Quality Inspector:\n\n 班（组）长：\n Leader:\n\n 日期Date：");


            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //35-TP-13-管道复位记录UG-FW-001 之 sheet1
        private void template35_sheet1(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 7, style, 0, 6, true);
            //设置单元格高宽
            ws.GetRow(rowIndex).Height = 100 * 20;
            ws.GetRow(rowIndex + 1).Height = 20 * 20;
            ws.GetRow(rowIndex + 2).Height = 20 * 20;
            ws.GetRow(rowIndex + 3).Height = 40 * 20;
            ws.GetRow(rowIndex + 4).Height = 20 * 20;
            ws.GetRow(rowIndex + 5).Height = 40 * 20;
            ws.GetRow(rowIndex + 6).Height = 20 * 20;
            ws.GetRow(rowIndex + 7).Height = 40 * 20;

            ws.SetColumnWidth(0, 20 * 256);
            ws.SetColumnWidth(1, 8 * 256);
            ws.SetColumnWidth(2, 15 * 256);
            ws.SetColumnWidth(3, 15 * 256);
            ws.SetColumnWidth(4, 10 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 10 * 256);

            //合并填充单元格
            for (int i = 0; i < 3; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 3));
                if (i == 2)
                    continue;
                if (i == 0)
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 6));
                else
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 4, 6));
            }

            ws.GetRow(rowIndex).GetCell(0).SetCellValue("SH/T3503-J408");
            ws.GetRow(rowIndex + 1).GetCell(0).SetCellValue("Subsystem Name子系统名称");
            ws.GetRow(rowIndex + 2).GetCell(0).SetCellValue("Fire Water");

            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 12, true, true, "Arial Unicode MS");
            setStyle.WrapText = true;
            ws.GetRow(rowIndex).GetCell(2).CellStyle = setStyle;
            ws.GetRow(rowIndex).GetCell(2).SetCellValue("Pipline Flushing and Blowing \nInspection Record(I)\n管道吹扫/清洗检验记录(I)");
            ws.GetRow(rowIndex + 1).GetCell(2).SetCellValue("Subsystem No.子系统编号");
            ws.GetRow(rowIndex + 2).GetCell(2).SetCellValue("UG-FW");

            var setStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            setStyle2.WrapText = true;
            ws.GetRow(rowIndex).GetCell(4).CellStyle = setStyle2;
            ws.GetRow(rowIndex).GetCell(4).SetCellValue(" Project Name：BASF (Guangdong) Integrated Project\n 项目名称：巴斯夫（广东）一体化项目\n Unit Name:Citral\n 单位名称：Citral");
            ws.GetRow(rowIndex + 1).GetCell(4).SetCellValue(" Test Package No.试压包号");

            for (int i = 3; i < 8; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 5));
            }
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("Inspection items and requirements\n检查项目及要求");
            ws.GetRow(rowIndex + 3).GetCell(6).SetCellValue("Result\n检查结果");
            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("Pipeline pressure test is acceptable.管线压力试验检查合格");
            ws.GetRow(rowIndex + 4).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("Safety attachments and instruments not involved in purging and cleaning have been dismantled or isolated as per requirement.与吹扫及清洗无关的安全附件和仪表元件已经拆除或按要求隔离");
            ws.GetRow(rowIndex + 5).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 6).GetCell(0).SetCellValue("All piping system valves have been opened.管线系统内阀门已按要求开启");
            ws.GetRow(rowIndex + 6).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("Test use water of stainless steel pipeline shall be in compliance with specification.不锈钢管线系统清洗用水应符合规范要求");
            ws.GetRow(rowIndex + 7).GetCell(0).CellStyle = setStyle2;

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 8, rowIndex + 24, style, 0, 6, true);
            //设置单元格高度和合并单元格
            for (int i = 8; i < 25; i++)
            {
                if (i == 8)
                    ws.GetRow(rowIndex + i).Height = 40 * 20;
                else
                    ws.GetRow(rowIndex + i).Height = 20 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 5, 6));
            }
            ws.GetRow(rowIndex + 8).GetCell(0).SetCellValue("Pipeline No.\n管道编号");
            ws.GetRow(rowIndex + 8).GetCell(2).SetCellValue("Material\n管线材质");
            ws.GetRow(rowIndex + 8).GetCell(3).SetCellValue("Operation Medium\n操作介质");
            ws.GetRow(rowIndex + 8).GetCell(4).SetCellValue("Blowing Meadium\n吹扫介质");
            ws.GetRow(rowIndex + 8).GetCell(5).SetCellValue("Flushing Medium\n清洗介质");

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 25, rowIndex + 27, style, 0, 6, true);
            ws.GetRow(rowIndex + 25).Height = 30 * 20;
            ws.GetRow(rowIndex + 26).Height = 40 * 20;
            ws.GetRow(rowIndex + 27).Height = 125 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 25, rowIndex + 25, 0, 6));
            ws.GetRow(rowIndex + 25).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 25).GetCell(0).SetCellValue("Inspection method and conclusion:\n检验方法及结果：");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 26, rowIndex + 26, 0, 1));
            ws.GetRow(rowIndex + 26).GetCell(0).SetCellValue("建设/监理单位\nOwner/Construction Supervision Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 26, rowIndex + 26, 2, 3));
            ws.GetRow(rowIndex + 26).GetCell(2).SetCellValue("总承包单位\nGeneral Contractor");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 26, rowIndex + 26, 4, 6));
            ws.GetRow(rowIndex + 26).GetCell(4).SetCellValue("施工单位\nConstruction Company");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 0, 1));
            ws.GetRow(rowIndex + 27).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 27).GetCell(0).SetCellValue(" Discipline Engineer:\n 专业工程师\n\n\n\n\n Date\n 日期：");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 2, 3));
            ws.GetRow(rowIndex + 27).GetCell(2).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 27).GetCell(2).SetCellValue(" Discipline Engineer:\n 专业工程师\n\n\n\n\n Date\n 日期：");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 27, rowIndex + 27, 4, 6));
            ws.GetRow(rowIndex + 27).GetCell(4).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 27).GetCell(4).SetCellValue(" Discipline Engineer:\n 专业工程师:\n Quality Inspector:\n 质量检查员：\n Group Leader:\n 班(组)长∶\n Date\n 日期：");
            #endregion


            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //35-TP-13-管道复位记录UG-FW-001 之 sheet2
        private void template35_sheet2(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");


            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 1, style1, 0, 8, true);
            ws.GetRow(rowIndex).Height = 15 * 20;
            ws.SetColumnWidth(0, 18 * 256);
            ws.SetColumnWidth(1, 4 * 256);
            ws.SetColumnWidth(2, 8 * 256);
            ws.SetColumnWidth(3, 8 * 256);
            ws.SetColumnWidth(4, 8 * 256);
            ws.SetColumnWidth(5, 8 * 256);
            ws.SetColumnWidth(6, 8 * 256);
            ws.SetColumnWidth(7, 9 * 256);
            ws.SetColumnWidth(8, 9 * 256);

            ws.GetRow(rowIndex).GetCell(7).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(8).SetCellValue("TP-13");

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 1, rowIndex + 4, style, 0, 8, true);

            ws.GetRow(rowIndex + 1).Height = 30 * 20;
            ws.GetRow(rowIndex + 2).Height = 60 * 20;
            ws.GetRow(rowIndex + 3).Height = 30 * 20;
            ws.GetRow(rowIndex + 4).Height = 20 * 20;

            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 12, true, true, "Arial Unicode MS");
            setStyle.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 2, 0, 0));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 2, 1, 5));
            ws.GetRow(rowIndex + 1).GetCell(1).CellStyle = setStyle;
            ws.GetRow(rowIndex + 1).GetCell(1).SetCellValue("复位检查\nRe-instatement Certificate");

            var setStyle2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            setStyle2.WrapText = true;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 2, 6, 8));
            ws.GetRow(rowIndex + 1).GetCell(6).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 1).GetCell(6).SetCellValue("项目名称：巴斯夫（广东）一体化项目\nProject Name：BASF (Guangdong) Integrated Project\n单位名称：Citral\nUnit Name:Citral");

            //头部列表部分
            ws.GetRow(rowIndex + 3).GetCell(0).SetCellValue("子系统名称 Subsystem Name");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 1, 5));
            ws.GetRow(rowIndex + 3).GetCell(1).SetCellValue("子系统编号 Subsystem No.");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 3, 6, 8));
            ws.GetRow(rowIndex + 3).GetCell(6).SetCellValue("试压包号 Test Package No.");

            ws.GetRow(rowIndex + 4).GetCell(0).SetCellValue("Fire Water");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 1, 5));
            ws.GetRow(rowIndex + 4).GetCell(1).SetCellValue("UG-FW");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 4, rowIndex + 4, 6, 8));
            ws.GetRow(rowIndex + 4).GetCell(6).SetCellValue("UG-130-FW-HT-001");

            #endregion

            #region 表格部分

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 5, rowIndex + 19, style, 0, 8, true);
            for (int i = 5; i < 20; i++)
            {
                ws.GetRow(rowIndex + i).Height = 40 * 20;
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 6));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 7, 8));
            }
            ws.GetRow(rowIndex + 5).GetCell(0).SetCellValue("检查内容\nInspection Items and requirements");
            ws.GetRow(rowIndex + 5).GetCell(7).SetCellValue("Results\n检查结果");
            ws.GetRow(rowIndex + 6).GetCell(0).SetCellValue("吹扫试压完成后，对管线的干燥情况进行检查。Flushing and hydrostatic testing have been satisfactorily completed and recorded ,Check drying of lines complete.");
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("按照P&ID恢复因清洗和试压拆除如调节阀等事项。All items (control valves ,etc.)removed for cleaning and testing have been reinstated as per P&ID.");
            ws.GetRow(rowIndex + 8).GetCell(0).SetCellValue("试压后机械之间连接的正式螺栓垫片，根据要求记录螺栓的扭矩值。Correct bolts,gasket used to reinstate all mechanical joints disturbed post test,torque record available as required. ");
            ws.GetRow(rowIndex + 9).GetCell(0).SetCellValue("所有临时放空及排放已拆除并按图恢复。All temporary vents and drains have been removed,and reinstated in accrodance with drawings.");
            ws.GetRow(rowIndex + 10).GetCell(0).SetCellValue("根据P&ID指示按照正确方向安装管道的原件。Directional sensitive piping elements are all correctly installed as indicated on P&ID.");
            ws.GetRow(rowIndex + 11).GetCell(0).SetCellValue("根据P&ID和图纸正确安装永久插板和盲板。Permanent spectacle and process blinds are in the correct position as indicated on P&ID and drawings. ");
            ws.GetRow(rowIndex + 12).GetCell(0).SetCellValue("正确安装指定阀门的延长手柄和链条。Extended spindles and chain wheels for specified valves have been correctly installed.");
            ws.GetRow(rowIndex + 13).GetCell(0).SetCellValue("All locking devices and interlocks for specified valves have been correctly installed.正确安装指定阀门的锁定装置和联动装置。");
            ws.GetRow(rowIndex + 14).GetCell(0).SetCellValue("按照PID＆图纸要求恢复临时拆除的管道、仪表和机械设备。All temporary removed piping,instrumentation,mechanical equipment are re-intated in accordance with the P&ID's and drawings.");
            ws.GetRow(rowIndex + 15).GetCell(0).SetCellValue("所有的阀门涂油脂和试压已经完成。All valves have been greased and stroked.");
            ws.GetRow(rowIndex + 16).GetCell(0).SetCellValue("螺纹连接根据规范要求进行。Compound on screwed connections in accordance with specification.");
            ws.GetRow(rowIndex + 17).GetCell(0).SetCellValue("安装所有的制动装置和联动装置。All locking device/interlocks installed.");
            ws.GetRow(rowIndex + 18).GetCell(0).SetCellValue("检查和确定弹簧支架、滑动支架装置。Spring Support,Gags removed&support settings confirmed/Checked.");
            ws.GetRow(rowIndex + 19).GetCell(0).SetCellValue("如果需要，释放给化学清洗、油洗。System released for chemical cleaning /hot oil flushing ,if required.");

            #endregion

            #region 尾部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 20, rowIndex + 26, style, 0, 8, true);
            ws.GetRow(rowIndex + 20).Height = 40 * 20;
            ws.GetRow(rowIndex + 21).Height = 15 * 20;
            ws.GetRow(rowIndex + 22).Height = 15 * 20;
            ws.GetRow(rowIndex + 23).Height = 15 * 20;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 20, rowIndex + 20, 0, 8));
            ws.GetRow(rowIndex + 20).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 20).GetCell(0).SetCellValue(" Conclusion:\n 检查结果：");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 23, 0, 1));
            ws.GetRow(rowIndex + 21).GetCell(0).SetCellValue("建设/监理单位\nOwner/Construction Supervision\nContractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 23, 2, 5));
            ws.GetRow(rowIndex + 21).GetCell(2).SetCellValue("总承包单位\nGeneral Contractor");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 21, rowIndex + 23, 6, 8));
            ws.GetRow(rowIndex + 21).GetCell(6).SetCellValue("施工单位\nConstruction Company");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 26, 0, 1));
            ws.GetRow(rowIndex + 24).GetCell(0).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 24).GetCell(0).SetCellValue(" 专业工程师\n Discipline Engineer:\n\n\n\n\n\n 日期Date：       ");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 26, 2, 5));
            ws.GetRow(rowIndex + 24).GetCell(2).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 24).GetCell(2).SetCellValue(" 专业工程师\n Discipline Engineer:\n\n\n\n\n\n 日期Date：    ");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 24, rowIndex + 26, 6, 8));
            ws.GetRow(rowIndex + 24).GetCell(6).CellStyle = setStyle2;
            ws.GetRow(rowIndex + 24).GetCell(6).SetCellValue(" 专业工程师\n Discipline Engineer:\n 质量检查员：\n Quality Inspector:\n 班（组）长：\n Leader:\n\n 日期Date：    ");

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            ws.FitToPage = true;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

        }

        //36-TP-14-法兰螺栓扭矩记录表
        private void template36(XSSFWorkbook hssfworkbook, XSSFSheet ws)
        {
            //插入图片部分
            var img1 = Server.MapPath("~/res/images/bsf/1.png");
            var img2 = Server.MapPath("~/res/images/bsf/2.png");
            var img3 = Server.MapPath("~/res/images/bsf/3.png");
            var img4 = Server.MapPath("~/res/images/bsf/4.png");

            int rowIndex = 0;
            var style = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");

            #region 头部

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex, rowIndex + 8, style, 0, 26, true);
            for (int i = 0; i < 27; i++)
            {
                ws.SetColumnWidth(i, 4 * 256);
            }
            ws.GetRow(rowIndex).Height = 15 * 20;
            ws.GetRow(rowIndex + 1).Height = 20 * 20;
            ws.GetRow(rowIndex + 2).Height = 20 * 20;
            ws.GetRow(rowIndex + 3).Height = 20 * 20;
            ws.GetRow(rowIndex + 4).Height = 20 * 20;
            ws.GetRow(rowIndex + 5).Height = 10 * 20;
            ws.GetRow(rowIndex + 6).Height = 10 * 20;
            ws.GetRow(rowIndex + 8).Height = 15 * 20;

            RegionUtil.SetBorderBottom(1, new CellRangeAddress(0, 0, 0, 26), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(6, 6, 0, 26), ws);
            RegionUtil.SetBorderTop(1, new CellRangeAddress(6, 6, 0, 26), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(7, 7, 0, 26), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(7, 7, 6, 6), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(7, 7, 13, 13), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(7, 7, 19, 19), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(0, 20, 26, 26), ws);
            RegionUtil.SetBorderBottom(1, new CellRangeAddress(8, 8, 0, 26), ws);

            InsertImage(hssfworkbook, ws, 1, 1, 2, 2, img1, 2, 1.8);
            InsertImage(hssfworkbook, ws, 1, 3, 2, 4, img2, 2, 1.8, 0, 3);
            InsertImage(hssfworkbook, ws, 1, 20, 2, 23, img3, 1.2, 2, 0, 10);
            InsertImage(hssfworkbook, ws, 1, 24, 2, 26, img4, 1.2, 2, 0, 10);

            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 23, 24));
            ws.AddMergedRegion(new CellRangeAddress(rowIndex, rowIndex, 25, 26));
            ws.GetRow(rowIndex).GetCell(23).SetCellValue("Form No.");
            ws.GetRow(rowIndex).GetCell(25).SetCellValue("TP-06");

            var setStyle = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.None, BorderStyle.None, BorderStyle.None, BorderStyle.None, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 12, true, true, "Arial Unicode MS");
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 2, 5, 22));
            ws.GetRow(rowIndex + 1).GetCell(5).CellStyle = setStyle;
            ws.GetRow(rowIndex + 1).GetCell(5).SetCellValue("巴斯夫（广东）一体化项目\nBASF (GUANGDONG) INTEGRATED PROJECT");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 1, rowIndex + 5, 23, 26));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 3, rowIndex + 4, 5, 22));
            ws.GetRow(rowIndex + 3).GetCell(5).CellStyle = setStyle;
            ws.GetRow(rowIndex + 3).GetCell(5).SetCellValue("螺栓扭矩报告\nBOLT TORQUE / TIGHTENING REPORT");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 0, 6));
            ws.GetRow(rowIndex + 7).GetCell(0).SetCellValue("试压包号\nTEST PACKAGE NO.:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 7, 13));
            ws.GetRow(rowIndex + 7).GetCell(7).SetCellValue("UG-130-FW-HT-001");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 14, 19));
            ws.GetRow(rowIndex + 7).GetCell(14).SetCellValue("系统号\nSYSTEM NO.:");

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 7, rowIndex + 7, 20, 26));
            ws.GetRow(rowIndex + 7).GetCell(20).SetCellValue("UG");

            #endregion

            #region 表格部分

            var style1 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Center, NPOI.SS.UserModel.HorizontalAlignment.Center, 10, true, false, "Arial Unicode MS");
            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 9, rowIndex + 33, style1, 0, 26, true);
            for (int i = 9; i < 34; i++)
            {
                if (i == 10)
                    continue;

                //列表头部两行合并
                if (i == 9)
                {
                    ws.GetRow(rowIndex + i).Height = 25 * 20;
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 0, 1));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 2, 7));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 8, 10));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 11, 13));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 14, 16));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 17, 19));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 20, 22));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 23, 24));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i + 1, 25, 26));
                }
                else
                {
                    ws.GetRow(rowIndex + i).Height = 18 * 20;
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 1));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 2, 7));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 8, 10));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 11, 13));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 14, 16));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 17, 19));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 20, 22));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 23, 24));
                    ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 25, 26));
                }
            }
            ws.GetRow(rowIndex + 9).GetCell(0).SetCellValue("序号\nNo.");
            ws.GetRow(rowIndex + 9).GetCell(2).SetCellValue("单线图号\nIsometric Line No.");
            ws.GetRow(rowIndex + 9).GetCell(8).SetCellValue("法兰编号\nFlange No.");
            ws.GetRow(rowIndex + 9).GetCell(11).SetCellValue("螺栓尺寸\nBolt Size");
            ws.GetRow(rowIndex + 9).GetCell(14).SetCellValue("螺栓等级\nBolt Class");
            ws.GetRow(rowIndex + 9).GetCell(17).SetCellValue("要求扭矩值\nRequired Torque");
            ws.GetRow(rowIndex + 9).GetCell(20).SetCellValue("实际扭矩值\nActual Torque");
            ws.GetRow(rowIndex + 9).GetCell(23).SetCellValue("接受\nACC");
            ws.GetRow(rowIndex + 9).GetCell(25).SetCellValue("拒绝\nReject");
            #endregion

            #region 尾部

            //文本左对齐置顶方式加换行
            var style2 = CommonPrint.SetExcelStyle(hssfworkbook, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, BorderStyle.Thin, VerticalAlignment.Top, NPOI.SS.UserModel.HorizontalAlignment.Left, 10, false, false, "Arial Unicode MS");
            style2.WrapText = true;

            ws = ExcelCreateRow(ws, hssfworkbook, rowIndex + 34, rowIndex + 45, style1, 0, 26, true);
            ws.GetRow(rowIndex + 34).Height = 40 * 20;
            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 0, 10));
            ws.GetRow(rowIndex + 34).GetCell(0).SetCellValue("总计检查螺栓\nTotal Bolts Checked");
            ws.GetRow(rowIndex + 34).GetCell(0).CellStyle = style2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 34, rowIndex + 34, 11, 26));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 35, rowIndex + 35, 0, 26));

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 36, rowIndex + 39, 0, 26));
            ws.GetRow(rowIndex + 36).GetCell(0).SetCellValue("备注/意见：\nRemarks/Comments");
            ws.GetRow(rowIndex + 36).GetCell(0).CellStyle = style2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 40, rowIndex + 40, 0, 26));
            ws.GetRow(rowIndex + 40).GetCell(0).SetCellValue("说明：按照BASF要求对螺栓进行扭矩工作。\nNotes: According to the BASF standard value to tighten the bolts.");
            ws.GetRow(rowIndex + 40).GetCell(0).CellStyle = style2;

            ws.AddMergedRegion(new CellRangeAddress(rowIndex + 41, rowIndex + 41, 0, 26));
            ws.GetRow(rowIndex + 41).GetCell(0).SetCellValue("批准：\nAccepted by:");
            ws.GetRow(rowIndex + 41).GetCell(0).CellStyle = style2;

            //循环合并单元格
            for (int i = 42; i < 46; i++)
            {
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 0, 3));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 4, 9));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 10, 15));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 16, 21));
                ws.AddMergedRegion(new CellRangeAddress(rowIndex + i, rowIndex + i, 22, 26));
            }
            ws.GetRow(rowIndex + 42).GetCell(4).SetCellValue("CC7");
            ws.GetRow(rowIndex + 42).GetCell(10).SetCellValue("JIANLI");
            ws.GetRow(rowIndex + 42).GetCell(16).SetCellValue("Worley");
            ws.GetRow(rowIndex + 42).GetCell(22).SetCellValue("BASF");

            ws.GetRow(rowIndex + 43).GetCell(0).SetCellValue("姓名Name");
            ws.GetRow(rowIndex + 43).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 44).GetCell(0).SetCellValue("签名Signature");
            ws.GetRow(rowIndex + 44).GetCell(0).CellStyle = style2;
            ws.GetRow(rowIndex + 45).GetCell(0).SetCellValue("日期Date");
            ws.GetRow(rowIndex + 45).GetCell(0).CellStyle = style2;

            //划线
            RegionUtil.SetBorderLeft(1, new CellRangeAddress(rowIndex, rowIndex + 45, 0, 0), ws);
            RegionUtil.SetBorderRight(1, new CellRangeAddress(rowIndex, rowIndex + 45, 26, 26), ws);

            #endregion

            ws.PrintSetup.FitWidth = 1;
            ws.PrintSetup.FitHeight = 0;
            ws.PrintSetup.PaperSize = (int)PaperSize.A4_Small;

            //垂直水平居中
            ws.VerticallyCenter = true;
            ws.HorizontallyCenter = true;
            //打印边距设置 厘米/3
            ws.SetMargin(MarginType.RightMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.LeftMargin, (double)2.9 / 3);
            ws.SetMargin(MarginType.TopMargin, (double)2.4 / 3);
            ws.SetMargin(MarginType.BottomMargin, (double)2.4 / 3);

            //页眉页脚间距
            ws.SetMargin(MarginType.HeaderMargin, 0);
            ws.SetMargin(MarginType.FooterMargin, 0);

            ws.FitToPage = true;

        }

        #endregion 

        private void CreateDataExcel(string[] templateFileIds)
        {
            var result = Funs.DB.Template_Files;
            if (result == null)
                return;

            string rootPath = Server.MapPath("~/") + Const.ExcelUrl;

            //导出文件
            string filePath = rootPath + "\\";
            if (!Directory.Exists(filePath))
            {
                Directory.CreateDirectory(filePath);
            }
            string fileName = "模版报表-" + DateTime.Now.ToString("yyyyMMddHHmmss") + ".xlsx";
            string ReportFileName = filePath + fileName;

            //XSSFWorkbook hssfworkbook = new XSSFWorkbook();

            string sourceFile = Server.MapPath("~/File/Excel/目录模版.xlsx");
            // 打开源工作簿
            XSSFWorkbook hssfworkbook;
            using (FileStream file = new FileStream(sourceFile, FileMode.Open, FileAccess.Read))
            {
                hssfworkbook = (XSSFWorkbook)WorkbookFactory.Create(file);
            }

            //操作目录模版sheet是否存在,不存在就把对应的sheet删除掉（特殊处理）
            int index = 0;
            //'2-TP-02-试压包封面UG-FW-001
            if (!templateFileIds.Contains("D4B4DD64-8361-4A75-AA3E-E484934B9B06"))
            {
                hssfworkbook.RemoveAt(0);
                index++;
            }
            //3-TP-03-试压包目录UG-FW-001
            if (!templateFileIds.Contains("6CD2710C-2AD6-4E7D-BED7-C8BEDAD300DE"))
            {
                hssfworkbook.RemoveAt(1 - index);
                index++;
            }
            //4-TP-04-试压标识
            if (!templateFileIds.Contains("87A66CAA-CA30-4A1E-8382-E8503059A0D0"))
            {
                hssfworkbook.RemoveAt(2 - index);
                index++;
            }

            //对应正常sheet处理
            foreach (var templateFileId in templateFileIds)
            {
                var oneTemp = result.FirstOrDefault(s => s.Id == templateFileId);
                if (oneTemp == null)
                    continue;
                switch (templateFileId)
                {
                    //1-TP-01-试压包路径表UG-FW-001
                    case "2BEFB0F4-A466-4C59-963F-9092BACF2E52":
                        XSSFSheet sheet1 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template1(hssfworkbook, sheet1);
                        break;
                    //6-TP-05-P&ID清单UG-FW-001 模版
                    case "811EF650-7686-447F-BEE8-776D50041CD0":
                        XSSFSheet sheet6 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template6(hssfworkbook, sheet6);
                        break;
                    //8-TP-06-单线图清单UG-FW-001 模版
                    case "A1E35220-A321-482A-B745-5F6456ADFE43":
                        XSSFSheet sheet8 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template8(hssfworkbook, sheet8);
                        break;
                    //11-TP-07-盲板清单UG-FW-001
                    case "F20D530C-29BB-405F-AB0E-342496134375":
                        XSSFSheet sheet11 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template11(hssfworkbook, sheet11);
                        break;
                    //13-弹簧支吊架安装检验记录SHT 3503-J403
                    case "0F1A38BB-C98E-4C21-B9EC-8B03CCB22BF2":
                        XSSFSheet sheet13 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template13(hssfworkbook, sheet13);
                        break;
                    //14-滑动固定管托安装检验记录SHT 3503-J404
                    case "9C6CB4B3-446D-4C24-ADD8-DAC5F5DEF302":
                        XSSFSheet sheet14 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template14(hssfworkbook, sheet14);
                        break;
                    //15-管道补偿器安装检验记录SHT 3503-J405
                    case "854BF339-C7FA-4935-9CBD-C844904F62FB":
                        XSSFSheet sheet15 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template15(hssfworkbook, sheet15);
                        break;
                    //16-TP-08-静电接地清单UG-FW-001
                    case "FEF7F71B-E630-49CE-AB3D-6BFADA074DB6":
                        XSSFSheet sheet16 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template16(hssfworkbook, sheet16);
                        break;
                    //17-管道焊接接头热处理报告SHT 3503-J411
                    case "1E3D0EA0-CE64-44EA-964F-5B289F5A588B":
                        XSSFSheet sheet17 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template17(hssfworkbook, sheet17);
                        break;
                    //18-金属材料化学成分检验报告SHT 3503-J129
                    case "0DAD1096-EA35-446E-B628-2F20C449C641":
                        XSSFSheet sheet18 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template18(hssfworkbook, sheet18);
                        break;
                    //19-硬度检查报告SHT 3503-J130
                    case "4B60CC6A-4431-49DF-A754-8B2C595C8C27":
                        XSSFSheet sheet19 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template19(hssfworkbook, sheet19);
                        break;
                    //21-管道焊接工作记录SHT 3503-J415
                    case "1BDF3627-8632-48A3-B8CB-1D388D8A112A":
                        XSSFSheet sheet21 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template21(hssfworkbook, sheet21);
                        break;
                    //22-射线检测比例确认表SHT 3503-J412-2007
                    case "857BDF12-E4E1-4FF1-A8D5-FC96CF09E70D":
                        XSSFSheet sheet22 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template22(hssfworkbook, sheet22);
                        break;
                    //23-TP-09-超声&PAUT&TOFD检测比例确认表
                    case "0400055B-388A-40B0-BB7E-283B94864893":
                        XSSFSheet sheet23 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template23(hssfworkbook, sheet23);
                        break;
                    //24-TP-10-渗透&MT检测比例确认表
                    case "B33E6C98-F999-4DC6-B0A4-633AE85B349C":
                        XSSFSheet sheet24 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template24(hssfworkbook, sheet24);
                        break;
                    //25-1-管道无损检测结果汇总表SHT 3503-J412-2017
                    case "95125974-3DD4-4E16-B4F0-A9D9C9A1406D":
                        XSSFSheet sheet25_1 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template25_1(hssfworkbook, sheet25_1);
                        break;
                    //25-管道无损检测结果汇总表SHT 3503-J412-2017
                    case "4C45ABAB-89E9-4874-8F55-5050CDE98DFC":
                        XSSFSheet sheet25 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template25(hssfworkbook, sheet25);
                        break;
                    //26-管道无损检测数量统计表SHT 3503-J413-2017
                    case "6947FAA5-0475-4BEA-BE3A-C88BA503A0A5":
                        XSSFSheet sheet26 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template26(hssfworkbook, sheet26);
                        break;
                    //27-TP-11-尾项清单UG-FW-001
                    case "012F03CB-85D7-4F57-8A4D-38AC209886BF":
                        XSSFSheet sheet27 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template27(hssfworkbook, sheet27);
                        break;
                    //28-TP-12-试压用水（工具）检查清单UG-FW-001
                    case "DD6E665D-F784-41BA-88EF-E836AB1EC02F":
                        XSSFSheet sheet28 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template28(hssfworkbook, sheet28);
                        break;
                    //32-管道系统压力试验记录SHT 3503-J406-2
                    case "A5F52E0C-90D2-4228-96ED-5FC4125159C5":
                        XSSFSheet sheet32 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template32(hssfworkbook, sheet32);
                        break;
                    //33-管道吹扫清洗记录SHT 3503-J408 UG-FW-001
                    case "B1AE758D-3850-4397-A036-7FA54EFD0A69":
                        XSSFSheet sheet33 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template33(hssfworkbook, sheet33);
                        break;
                    //34-管道系统压力试验条件确认记录SHT 3503-J406-1
                    case "AFC08566-A8D0-4118-B240-AADA04305E1B":
                        XSSFSheet sheet34 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template34(hssfworkbook, sheet34);
                        break;
                    //35-TP-13-管道复位记录UG-FW-001
                    case "114E0846-93CB-4F12-A8BA-CE5B80C26A9C":
                        XSSFSheet sheet35_sheet1 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title + "-sheet1");
                        template35_sheet1(hssfworkbook, sheet35_sheet1);
                        XSSFSheet sheet35_sheet2 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title + "-sheet2");
                        template35_sheet2(hssfworkbook, sheet35_sheet2);
                        break;
                    //36-TP-14-法兰螺栓扭矩记录表
                    case "1C555FBB-DC81-4D2E-8EA7-8F6F0D4A4142":
                        XSSFSheet sheet36 = (XSSFSheet)hssfworkbook.CreateSheet(oneTemp.Title);
                        template36(hssfworkbook, sheet36);
                        break;
                }

            }

            //生成第{N}个模版

            using (FileStream filess = System.IO.File.OpenWrite(ReportFileName))
            {
                hssfworkbook.Write(filess);
            }
            try
            {
                FileInfo filet = new FileInfo(ReportFileName);
                Response.Clear();
                Response.ContentType = "application/x-zip-compressed";
                Response.AddHeader("Content-Disposition", "attachment;filename=" + System.Web.HttpUtility.UrlEncode(fileName, System.Text.Encoding.UTF8));
                Response.AddHeader("Content-Length", filet.Length.ToString());
                Response.TransmitFile(ReportFileName, 0, filet.Length);
                Response.Flush();
                Response.Close();
                System.IO.File.Delete(ReportFileName);
            }
            catch (Exception ex)
            {
                BLL.ErrLogInfo.WriteLog(ex.Message);
            }


        }


        #region 私有方法

        /// <summary>
        /// 获取某一列的所有值
        /// </summary>
        /// <typeparam name="T">列数据类型</typeparam>
        /// <param name="dtSource">数据表</param>
        /// <param name="filedName">列名</param>
        /// <returns></returns>
        public static List<T> GetColumnValues<T>(DataTable dtSource, string filedName)
        {
            return (from r in dtSource.AsEnumerable() select r.Field<T>(filedName)).ToList<T>();
        }

        /// <summary>
        /// 行和列
        /// </summary>
        /// <returns></returns>
        private XSSFSheet ExcelCreateRow(XSSFSheet ws, XSSFWorkbook hssfworkbook, int sRows, int eRows, ICellStyle style, int cStart, int cEnd, bool istitle = false)
        {
            for (int i = sRows; i <= eRows; i++)
            {
                ws.CreateRow(i);
                if (istitle)
                {
                    ws.GetRow(i).HeightInPoints =
                            i == sRows ? 49.75f :
                            i == (sRows + 1) ? 13.75f :
                            38f;
                }
                else
                {
                    ws.GetRow(i).HeightInPoints = 38f;
                }
                for (int j = cStart; j <= cEnd; j++)
                {
                    ws.GetRow(i).CreateCell(j);
                    ws.GetRow(i).GetCell(j).CellStyle = style;
                }
            }
            return ws;
        }

        private ICellStyle SetStyle(XSSFWorkbook ws, BorderStyle top, BorderStyle bottom, BorderStyle left, BorderStyle right)
        {
            ICellStyle style = ws.CreateCellStyle();
            style.BorderLeft = left;
            style.BorderRight = right;
            style.BorderTop = top;
            style.BorderBottom = bottom;

            return style;
        }

        private void InsertImage(XSSFWorkbook hssfworkbook, XSSFSheet ws, int row1, int col1, int row2, int col2, string img, double w, double h, int dx1 = 0, int dy1 = 0, int dx2 = 0, int dy2 = 0)
        {
            int pictureIdx = hssfworkbook.AddPicture(System.IO.File.ReadAllBytes(img), PictureType.PNG);
            IDrawing drawing = ws.CreateDrawingPatriarch();
            IClientAnchor anchor = new XSSFClientAnchor(dx1 * XSSFShape.EMU_PER_PIXEL, dy1 * XSSFShape.EMU_PER_POINT, dx2 * XSSFShape.EMU_PER_PIXEL, dy2 * XSSFShape.EMU_PER_POINT, col1, row1, col2, row2);
            IDrawing patriarch = ws.CreateDrawingPatriarch();
            IPicture pict = (XSSFPicture)patriarch.CreatePicture(anchor, pictureIdx);
            pict.Resize(w, h);

        }
        #endregion
    }
    #endregion

}